Upgradation And Remaining Works of Lakshadweep House, Chanakyapuri, New Delhi

Amount

DISMANTLING & DEMOLITION:

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 100 mm nominal bore

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling Butch / ashlar face stone work, along with cement mortar 50mm thick, manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead excluding scaffolding as per direction of Engineer-in-charge.

CIVIL WORKS:

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works above plinth level upto floor V level (Concrete of M25 grade with minimum cement content of 330 kg /cum)

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts

Providing and laying Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Piles and Tie Beams) (Thermo-Mechanically Treated bars of grade Fe-500D or more)

Providing & applying NITO BOND (or Polymer Based Material on Old Concrete surfaces Befor Application Of new Conctre

Beam chasing for existing shaft casting 6No./Floor

ANTI CORROSION used on existing bar in shaft casting (POLYMER BASED)COATING ON BAR.-1Lt/floor)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level:Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size (600X600 Floor Tiles)

Providing and laying Vitrified tiles in wall in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size (6000X600 Wall Dedo)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab all colour and texture except black, Cherry/Ruby red Area of slab upto 0.50 sqm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 1200x600 mm & 600x600mm

Providing and fixing foam based PVC sheet for protection of Vitrified Tile and any other type of flooring complete in all respects and to the entire satisfaction of Engineer-in-Charge.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

12 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Providing and fixing China mossaic tiles on terrace of all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The China mosaic tiles to be fixed on the terrace/wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

FALSE CEILING, PAINT WORK AND POLISHING WORK

Providing and applying plaster of paris punning of 12 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying plaster of paris punning of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and applying Spectrum Parlina texture paint on Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on decorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete in all respects and to the entire satisfaction of Architects and Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (12.5 mm thick tapered edge gypsum moisture resistant board)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

PLUMBING AND SANITARY WORKS

Supply,checking, storing and fixing S. S. sink, single bowl with tap point on wall / counter comprising of Concealed type brackets fixed to wall with adjustable clamp to push against counter rim,40 mm heavy plated C.P. waste coupling JAQUAR-ALD-729 fitting without pop-up,with flexible PVC pipe with connector,CP swan neck sink faucet model JAQUAR-LYR-38347S Painting brackets with two coats of white enamel paint over one coat of primer,table mounted / wall mounted. Kitchen sink with drain board)(model :Nirali-olympia or equivalent)

Supply, checking, storing and fixing in position European water closet comprising of Wall hung European W.C. Pan Model ARIA-ARS-WHT-39951UFSM or Equivalent in white colour, on approved type of chairs,Concealed flushing cistern Model No.Geberit Omega Concealed Cistern with Flush plate or Equivalent or Equivalent as directed,C.P health faucet Model No. JAQUAR-ALD-565 or Equivalent with required length of flexible tube, clamp and bracket for fixing to wall,15 mm C.P. brass heavy quality angle stop cocks Model No.JAQUAR-JAQUAR-ALI-85053 or Equivalent for flushing cistern,C.P. brass 2-way bib cock Model No. JAQUAR-ALI-85041 or Equivalent,CP Toilet paper holder Model JAQUAR-ACN-1153S or Equivalent,Solid bakelite water closet cover and seat with C.P. hinges and rubber buffers,Fixing W.C. unit with brackets and accessories in position,Necessary pipe connection to PVC / PP / CI soil pipe,Painting bracket with two coats of white enamel paint over a coat of primer.

Supply, checking, storing and fixing Under Counter wash hand basin MODEL:JAQUAR-FNS-WHT-40701 ith ,32 mm heavy plated C.P. waste coupling JAQUAR-ALD-729 fitting with pop-up,32 mm heavy plated C.P. bottle trap JAQUAR-ALD-769L300X190 with cleaning eye with extension piece and wall flange,Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Mixture JAQUAR-ARC-87011B with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure.

Supply, checking, storing & fixing CP Over Head Rain shower MODEL:JAQUAR-OHS-35497 complete as per instructions of the engineer-in-charge.

Supply, checking, storing & fixing CP single lever wall mixer MODEL:JAQUAR-ARC-87661K with Concealed body Shower Valve MODEL:JAQUAR-ARC-87065C & Bath spout complete as per instructions of the engineer-in-charge.

Supply, checking, storing & fixing C.P. brass towel ring MODEL:JAQUAR-ACN-1121BN Round to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required .

Supply, checking, storing & fixing C.P. brass angle valve for basin & Sink MODEL:JAQUAR-ALI-85053, of approved quality conforming to IS:8931 for a) 15mm Nominal Bore

Supply, checking, storing & fixing C.P. brass bib cock MODEL:JAQUAR-ALI-85037 of approved quality conforming to IS:8931. a) 15mm Nominal Bore

Supply, Checking, Storing and fixing vitreous Large flat back urinals Model No. JAQUAR-URS-WHT-13257or Equivalent with Conceal automatic fushing system Model No. JAQUAR-SNR-STL-51077 or Equivalent in white colour with concealed type wall hanger or special bracket in wall and hinged type C.P. dome gratings.C.P. flush pipes from auto flush, spreaders, full bore inlet caps as necessary made to measure.C.P. waste pipe and Speader under each urinal pan, leading to the CP bottle trap Model No.JAQUAR-ALD-769L300X190 or Equivalent below and painting with two coats of white enamel paints and cutting and making good the walls wherever require.

Supply, checking, storing & fixing straight/offset type Macfit single body push fit type WC Pan Connector Jaquar-ZPS-WHT-VB01 with factory supplied spring loaded seal guard with integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for use with CI Pipe as supplied with Pan Connector (For European water closet)

SOIL WASTE AND VENT PIPE

Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl,Access pipe for claening in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification,drawings and schematics. All hangers, clamps, brackets,anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet). 40 mm

Pipes for soil , waste , Rain , Vent for Shaft /External Area

Supply , installation , testing and commissioning Polyproplene (PP) 110mm x 110mm size P trap (Floor trap) of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry.

Supply , installation , testing and commissioning Polyproplene (PP) 110mm x 75mm size Multi floor trap of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. ( In sahft )

INTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic & Hot) (Inside Toilet)(Make:Astral,Ashirwad,Finolex)

15 mm nominal outer dia Pipes ( SDR 11 )

20 mm nominal outer dia Pipes ( SDR 11 )

25 mm nominal outer dia Pipes ( SDR 11 )

32 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. For Cold Water Lines ( Domestic & Hot ) (In shaft & Terrace & Exposed On wall)(Make:Astral,Ashirwad,Finolex)

25 mm nominal outer dia Pipes ( SDR 11 )

32 mm nominal outer dia Pipes ( SDR 11 )

40 mm nominal outer dia Pipes ( SDR 11 )

50 mm nominal outer dia Pipes ( SDR 11 )

Supply , installation ,testing & Commissioning of thick EPDM rubber on pipe line for hot water supply & return pipe lines in Inside Toilets fixture to Vertical line shaft with proper canvas paint of approved make, complete, as directed, of the following nominal bore (NB) size . Installation shall be to the satisfication of the Engineer-In-Charge. : (For internal , Shaft and terrace)

20 mm(9mm thick)

25 mm(9mm thick)

32 mm dia (9mm thick)

40 mm dia (13mm thick)

50 mm dia (13mm thick)

Supply , installation ,testing & Commissioning heavy quality gun metal Horizontal non return valve confirming to IS 778 , with screwed in cover 16 kg/m2 of approved make, on water supply lines of the following nominal bore (NB) size: 50 mm dia.

32 mm dia.

25 mm dia.

20 mm dia.

15 mm dia.

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader)

20 mm dia

25mm dia

32mm dia

40mm dia

50mm dia

ELECTRICAL WORKS

1) DISTRIBUTION BOARD

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43

(ii)8 way

(iii)12 way

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door

(ii)8 way

MCB 's and its Accessories

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 6A TO 32A

Providing & erecting 415 V MCB Four pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 63A

Providing & erecting 230 V MCB Double pole RCCB (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 25A

Providing & erecting 230 V MCB Double pole RCCB (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 40A

(i) 25 Amps.FP - Cat. III

Supply installation testing and commissioning of Surge Protection Devices (SPD) in existing distibution boards. 1.2KV Protection level, Class 's', (Imax-15-20KA, 8/20µs) Double Pole. Complete as required.

Supply installation testing and commissioning of Surge Protection Devices (SPD) in existing distibution boards. 1.2KV Protection level, Class 's', (Imax-15-20KA, 8/20µs) Four Pole. Complete as required.

Supplying & erecting 32 Amp DP 10 KA ‘C Curve’ single pole MCB with Surface / Recess Mounted Metal Enclouser Box

Supplying & erecting 63 Amp TP 10 KA ‘C Curve’ single pole MCB with Surface / Recess Mounted Metal Enclouser Box

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection.

Supplying & erecting 32 Amp 10 KA ‘C Curve’ single pole MCB with 32 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection.

CABLES

Providing XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV.

(A) 4 core 25 Sq. mm

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable.

(b) 4 core 6 Sq. mm

(c) 4 core 10 Sq. mm

Laying of PVC insulated Xlpe cable of 1.1KV grade of following size in existing duct and cable tray

Upto 35sqmm

Above 35sqmm and 95sqmm

CABLE TERMINATION

Providing and, fixing flange type brass compression type cable gland with rubber ring and Lugs for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

3 1/2X25sqmm

4X10SQMM

CABLE TRAY

Providing and fixing approved make Perforated C type cable tray. Hot Dip GI Cable tray with perforation sections, joint with connectors, Suspended from ceiling with MS Suspenseor with nut, bolts including Paint of support etc.

150 X 50 X 1.6 mm Thick

200 X 50 X 2 mm Thick

300 X 50 X 2 mm Thick

Providing and fixing approved make 'BEND' for ladder type cable tray. Made from M.S sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..

150 X 50 X 1.6 mm Thick

200 X 50 X 2 mm Thick

300 X 50 X 2 mm Thick

INTERNAL WIRING (WITH MODULAR TYPE SWITCHES)

Point wiring for Light with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up in Recess PVC MMS Conduit erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on Metallic box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for Fan Point / Bell Point / Exhaust with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up in Recess PVC MMS Conduit erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on Metallic box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for Twin Controll Light with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up in Recess PVC MMS Conduit erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on Metallic box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

SITC of 6A Plug Point with 6A Switch with Front Plate and Back box to be fix recess wall

SITC of 16A Plug Point with 16A Switch with Front Plate and Back box to be fix recess wall

SITC of 13A International Stander Plug Point with 16A Switch with Front Plate and Back box to be fix recess wall

MAINS

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with Copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

2 wire 1.5 sq. mm(P+N) X 1.5sqmm (E ) wires

2 wire 2.5 sq. mm(P+N) X 2.5sqmm (E ) wires

2 wire 4.0 sq. mm(P+N) X 4.0sqmm (E ) wires

2 wire 6.0 sq. mm(P+N) X 6.0sqmm (E ) wires

2 wire 10.0 sq. mm(P+N) X 6.0sqmm (E ) wires

Supply and lbour chrges for laying of 0.5mm Telephone wire in exisiting PVC conduit A) 2pair

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed

25mm ( Low voltage & Electrical )

32mm ( Low voltage & Electrical )

40mm ( Low voltage & Electrical )

LIGHT FIXTURES & FANS

(A) Tube Light with integral driver (a) 5-9 Watts, Surge-2 KV, IP-20,2 feet Cat-lll

(A) Tube Light with integral driver (d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

(C) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (b) 11-15 watts, Surge-2 KV Cat-lll

(C) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (C) 22-24 watts, Surge-2 KV Cat-lll

LED COB Light WITH 15WT , Surge-2 KV,

LED COB Light WITH 12WT , Surge-2 KV,

(I) Mirror Light 9 Watts, wall mounted minimum 1 feet long

(H) Step Light having Aluminium die cast and ABS Plastic material. (a) 5 watts, Direct/Indirect luminaire Cat-lll

E ) LED Strip Light (a) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non integral suitable Driver complete Cat-lll

Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free fittings components mounted in chrome finish housing with holder ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage capacity as per instruction engineer incharge/architect/authority

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing.

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. Cat.II

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II

Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall mounted with height adjustment and rotary tilting device complete with guard, wall bracket,mounting accessories as directed. (A) 450mm

EARTHING

Supplying & erecting GI 4.5mtr long 40mm Dia GI Pipe including Accessories& providing masonary enclouser with cover plate having locking arrangement and watring pipe etc

SITC of 25X5 GI earthing strip

Provide and laying of 6swg gi earthing wire in 15mm dia gi pipe

SITC of laying of 6.0sqmm Wire

Fire Alarm Panel

SITC of 2Loop Micro Processor base Addressble Panel

SITC of Addressable Smoke detector

SITC of Sounder addresable

SITC of addressable MCP( Manual call point)

SITC of addressable Telephone

SITC of 2C X 1.5sqmm Copper Red Insulated CU XLPE Armoured Cable

PA System

Sitc of 6wt ceiling mounted Speakers

SITC of Speaker cable in Existing Conuit Single Pair 2core

HVAC SYSTEM

The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum..The maximum sound level of unit shall be 60dB(A) @ 3 m from source. 150 CFM,Total static pressure of 10 mm WG

Supply, installation and balancing of square/ rectangular extruded aluminium powder coated grilles with 4 side flange for exhaust air 150mmx150mm (neck size)

SITC of VRF Air Cooled AC System

Hi Wall Mounted Type VRF Indoor Unit

Supply, installation, testing and commissioning of VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required.

2.0 TR Hi Wall Mounted Type Unit

2.8 TR Hi Wall Mounted Type Unit

CASSETTE TYPE VRF Indoor Unit

Supply, installation, testing and commissioning of 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required

2.0 TR 4 Way Flow Cassette Type Unit

2.8 TR 4 Way Flow Cassette Type Unit

4.0 TR 4 Way Flow Cassette Type Unit

Outdoor Units of VRF System

Supply and Installation of Compact Air Cooled type outdoor units of VRF System Outdoor unit modular type variable refrigerant flow/variable refrigerant volume air cool outdoor units suitable for cooling and heating having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules shall be used in designing & supplying of the units. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector & Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection.

Refrigerant to be used: R-134a/R-32/R-600a/R-290/ R-410a or any other eco-friendly refrigerant.

28.0 HP Capacity

VRF System Remote Controller

Supply / Installation / Testing and Commissioning of Cordlesss remotes for VRF indoor units ( For Cassette Type IDUs )

Supply, Installation, testing & Commissioning of Central Controller for entire VRV system , the scope includes the control wiring and conduting of the same in a lot. The controller shall be progremmed for soft integration with the building BMS system

Branch Distrubution refrigerant Pipe joints with precase insulation

Supply and fixing of V-Joint/REF-NET

Refrigeration Piping & First Charge of Refrigerant For VRF System

SITC of Seamless heavy gauge Copper piping of following size duly insulated with 19mm thk. Nitrile Rubber Insulation covered with self bonded UV resistant canvass cloth ( As per Specified with K Value of 0.027-0.029 K Cal/Hr.M Deg C at 0-16 Deg C) . Refrigeration piping will have to be taken in the piping rack / engineered Support as specified individually connecting to all indoor units for the respective floors. Even necessary supports, fittings, valves & ref. joints where ever required will be included.

Copper piping including all supports , insulation as specified for HP VRF ODU and TR VRF IDU

Power & Communication Cabling For VRF System

Power Cabling to individual Outdoor units with PVC conduits. ( From Power Panel to VRF ODU )

Supply, laying, testing and commissioning of Communication cabling , unarmoured, Copper conductor with PVC conduit complete in all respect 2C x 1.5 sq.mm Communication Cable between Outdoor Units & Indoor Units with PVC conduits

UPVC Drain

U PVC Drain Piping Duly Insulated With 9 Mm Nitrile Rubber And BOPP Tape Of Following Size Dia.

MS Fabrication Work

BAHUSMARNA CONSTRUCTION PRIVATE LIMITED