Composite Works for new LPG Road Loading and Unloading Gantry

Amount

MECHANICAL

Supply of Pipe (Seamless): 2", STD, ASTM A 106 GR.B, B -36.10, BE

Supply of Pipe (Seamless): 3", STD, ASTM A 106 GR.B, B -36.10, BE

Supply of Pipe (Seamless): 4", STD, ASTM A 106 GR.B, B -36.10, BE

Supply of Pipe (Seamless): 8", S30, ASTM A 106 GR.B, B -36.19, BE

Supply of Pipe (C. Welded): 2", HVY, IS-1239 BLACK, BE

Supply of Elbow 90 deg.: 3/4",3000 #, ASTM A 105, B - 16.11, SW

Supply of Elbow 90 deg.: 1.5",3000 #, ASTM A 105, B - 16.11, SW

Supply of Elbow 90 deg.: 2",STD, ASTM A234 GR.WPB, B - 16.9, BW

Supply of Elbow 90 deg.: 3",STD, ASTM A234 GR.WPB, B - 16.9, BW

Supply of Elbow 90 deg.: 4",STD, ASTM A234 GR.WPB, B - 16.9, BW

Supply of Elbow 90 deg.: 8",S30, ASTM A234 GR.WPB, B - 16.9, BW

Supply of Elbow 45 deg.: 3/4",3000#, ASTM A 105, B - 16.11, SW

Supply of Elbow 45 deg.: 1.5",3000#, ASTM A 105, B - 16.11, SW

Supply of Equal Tee: 1/2"x1/2", 3000#, ASTM A 105, B - 16.11, SW

Supply of Equal Tee: 3/4"x3/4", 3000#, ASTM A 105, B - 16.11, SW

Supply of Equal Tee: 1"x1", 3000#, ASTM A 105, B - 16.11, SW

Supply of Equal Tee: 2"x2",STD, ASTM A 234 GR.WPB, B -16.9, BW

Supply of Equal Tee: 3"x3",STD, ASTM A 234 GR.WPB, B -16.9, BW

Supply of Equal Tee: 4"x4",STD, ASTM A 234 GR.WPB, B -16.9, BW

Supply of Equal Tee: 8"x8",STD, ASTM A 234 GR.WPB, B -16.9, BW

Supply of Half Coupling: 1/2",3000 #, ASTM A105, B - 16.11, SW

Supply of Half Coupling: 3/4",3000 #, ASTM A105, B - 16.11, SW

Supply of Half Coupling: 1.5",3000 #, ASTM A105, B - 16.11, SW

Supply of S.W. Flange: 1/2", 300 #, ASTM A105, B - 16.5, RF

Supply of S.W. Flange: 3/4", 150 #, ASTM A105, B - 16.5, RF

Supply of S.W. Flange: 3/4", 300 #, ASTM A105, B - 16.5, RF

Supply of S.W. Flange: 1", 150 #, ASTM A105, B - 16.5, RF

Supply of S.W. Flange: 1", 300 #, ASTM A105, B - 16.5, RF

Supply of S.W. Flange: 1.5", 150 #, ASTM A105, B - 16.5, RF

Supply of S.O. Flange: 2", 150 #, ASTM A105, B - 16.5, RF

Supply of W.N. Flange: 2",300 #, ASTM A105, B - 16.5, RF

Supply of W.N. Flange: 3",150 #, ASTM A105, B - 16.5, RF

Supply of W.N. Flange: 3",300 #, ASTM A105, B - 16.5, RF

Supply of W.N. Flange: 4",300 #, ASTM A105, B - 16.5, RF

Supply of W.N. Flange: 6",300 #, ASTM A105, B - 16.5, RF

Supply of W.N. Flange: 8",300 #, ASTM A105, B - 16.5, RF

Supply of Blind Flange: 1", 150#, ASTM A 105, B-16.5, RF

Supply of Blind Flange: 1", 300#, ASTM A 105, B-16.5, RF

Supply of Blind Flange: 2", 300#, ASTM A 105, B-16.5, RF

Supply of Blind Flange: 3", 150#, ASTM A 105, B-16.5, RF

Supply of Blind Flange: 4", 300#, ASTM A 105, B-16.5, RF

Supply of Blind Flange: 6", 300#, ASTM A 105, B-16.5, RF

Supply of Blind Flange: 8", 300#, ASTM A 105, B-16.5, RF

Supply Swage concentric: 3/4"X1/2", 6000#, ASTM A 105, BS-3799, PBE

Supply Swage concentric: 3/4"X1 1/2", 6000#, ASTM A 105, BS-3799, PBE

Supply End Cap: 3/4", 6000#, ASTM A 105, B-16.11, SCRF

Supply Eccentric Reducer: 3"x2", STD, ASTM A234 GR. WPB, B-16.9, BW

Supply Eccentric Reducer: 4"x3", STD, ASTM A234 GR. WPB, B-16.9, BW

Supply of Gate Valve: 3/4",800 #, A105, 13%CR,TRIM, API - 602, SW

Supply of Gate Valve: 1",800 #, A105, 13%CR,TRIM, API - 602, SW

Supply of Gate Valve: 1.5",800 #, A105, 13%CR,TRIM, API - 602, SW

Supply of Gate Valve: 2",300 #, A216GRWCB, 13%CR,TRIM, API - 600, RF

Supply of Gate Valve: 2",150 #, BODYA216GRWCB, 13%CR,T, API - 600, RF

Supply of Gate Valve: 3",150 #, BODYA216GRWCB, 13%CR,T, API - 600, RF

Supply of Gate Valve: 3",300 #, A216GRWCB, 13%CR,TRIM, API - 600, RF

Supply of Gate Valve: 4",300 #, A216GRWCB, 13%CR,TRIM, API - 600, RF

Supply of Gate Valve: 6",300 #, A216GRWCB, 13%CR,TRIM, API - 600, RF

Supply of Gate Valve: 8",300 #, A216GRWCB, 13%CR,TRIM, API - 600, RF

Supply of Ball Valve: 3/4",300 #, A105, PTFE SEAT & SEAL, BS-5351, RF

Supply of Ball Valve: 1",300 #, A105, PTFE SEAT & SEAL, BS-5351, RF

Supply of Ball Valve: 2",300 #, A105, PTFE SEAT & SEAL, BS-5351, RF

Supply of Ball Valve: 3",300 #, A105, PTFE SEAT & SEAL, BS-5351, RF

Supply of Ball Valve: 4",300 #, A105, PTFE SEAT & SEAL, BS-5351, RF

Supply of Check Valve: 1", 800#, A105, 13% CR. TRIM, BS-5352, SW

Supply of Check Valve: 2", 300#, A216GRWCB, 13% CR. TRIM, BS-1868, RF

Supply of Check Valve: 2", 150#, A216GRWCB, 13% CR. TRIM, BS-1868, RF

Supply of Check Valve: 3", 150#, BODYA216GRWCB, 13% CR. T, BS-1868, RF

Supply of Check Valve: 3", 300#, A216GRWCB, 13% CR. TRIM, BS-1868, RF

Supply of Check Valve: 4", 300#, A216GRWCB, 13% CR. TRIM, BS-1868, RF

Supply of Check Valve: 6", 300#, A216GRWCB, 13% CR. TRIM, BS-1868, RF

Supply of FIG.8 FL: 1", 150#, ASTM A 105, API-590, FF

Supply of FIG.8 FL: 2", 300#, ASTM A 105, API-590, FF

Supply of FIG.8 FL: 2", 150#, ASTM A 105, API-590, FF

Supply of FIG.8 FL: 3", 150#, ASTM A 105, API-590, FF

Supply of FIG.8 FL: 3", 300#, ASTM A 105, API-590, FF

Supply of FIG.8 FL: 4", 300#, ASTM A 105, API-590, FF

Supply of FIG.8 FL: 8", 300#, ASTM A 105, API-590, FF

Supply of Gasket (Spiral wound): 1",150 #, SS316 SPR. WND+GRAFIL B-16.20, ANSI B16.5_

Supply of Gasket (Spiral wound): 1",300 #, SS316 SPR. WND+GRAFIL B-16.20, ANSI B16.5_

Supply of Gasket (Spiral wound): 1.5",300 #, SS316 SPR. WND+GRAFIL B-16.20, ANSI B16.5_

Supply of Gasket (Spiral wound): 3",150 #, SS316 SPR. WND+GRAFIL B-16.20, ANSI B16.5_

Supply of Gasket (Spiral wound): 3",300 #, SS316 SPR. WND+GRAFIL B-16.20, ANSI B16.5_

Supply of Stud with Nuts: M12x70,_, A 193 Gr. B16/A 194 Gr.4, B-18.2, _(0.5''X 2.75'')

Supply of Stud with Nuts: M12x80,_, A 193 Gr. B16/A 194 Gr.4, B-18.2, _(0.5'' X 3.0'')

Supply of Stud with Nuts: M12x90,_, A 193 Gr. B16/A 194 Gr.4, B-18.2, _(0.5'' X 3.25'')

Supply of Stud with Nuts: M16x120,_, A 193 Gr. B16/A 194 Gr.4, B-18.2, _( 0.625'' X 4.75'')

Supply of MOV: 6", 300#, BODY A216GRWCB, 13% CR. TRIM, MNF. STD, RF

Supply of MOV: 8", 300#, BODY A216GRWCB, 13% CR. TRIM, MNF. STD, RF

Supply of 4-Way Valve: 6", 300#, BODY A216GRWCB, 13% CR. TRIM, MNF, STD, RF

Sampling bottle assembly:1/2", as per datasheet, RF

Supply of anti freez type valve: 3/4", as per datasheet, RF

Supply of EFCV (Excess flow check valve): 3", 300#, BODY A216GRWCB, 13% CR. TRIM, MNF. STD, RF

Supply of Orifice Flange & Plate: 1.5", 300#, ASTM A105, B-16.36, RF

Supply of Orifice Flange & Plate: 2", 300#, ASTM A105, B-16.36, RF

Supply of TSV: 3/4"X 1", as per datasheet, RF

Supply of Pipe(C. Welded) 2",HVY,IS-1239 BLACK,IS-1239,BE

Supply of Pipe(C. Welded) 3",HVY,IS-1239 BLACK,IS-1239,BE

Supply of Pipe(C. Welded) 4",HVY,IS-1239 BLACK,IS-1239,BE

Supply of Pipe(C. Welded) 6",HVY,IS-1239 BLACK,IS-1239,BE

Supply of Pipe(C. Welded) 8",6.35,IS-3589 GR.330,IS-3589,BE( 6MM THK)

Supply of Pipe(C. Welded) 12",6.35,IS-3589 GR.330,IS-3589,BE (8MM THK)

Supply of 3",HVY,IS-1239 BLACK,IS-1239,BE(STD)

Supply of 4",ASTM A234 GR.WPB,B - 16.9,BW

Supply of 6",HVY,ASTM A234 GR.WPB,B - 16.9,BW(STD)

Supply of 8",6.35,ASTM A234 GR.WPB,B - 16.9,BW(6mm THK)

Supply of 12",6.35,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Elbow 45 Deg. 3",HVY,IS-1239 BLACK,IS-1239,BE(STD)

Supply of Elbow 45 Deg. 4",ASTM A234 GR.WPB,B - 16.9,BW

Supply of Elbow 45 Deg. 6",HVY,ASTM A234 GR.WPB,B - 16.9,BW(STD)

Supply of Elbow 45 Deg. 8",6.35,ASTM A234 GR.WPB,B - 16.9,BW(6mm THK)

Supply of Elbow 45 Deg. 12",6.35,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Equal Tee 1/2",3000 #,ASTM A105,B - 16.11,SW

Supply of Equal Tee 1",3000 #,ASTM A105,B - 16.11,SW

Supply of Equal Tee 2",HVY,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Equal Tee 3",HVY,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Equal Tee 4",HVY,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Equal Tee 8",6.35,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Concentric Reducer 4"x2",HVY,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Concentric Reducer 6"x4",HVY,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Concentric Reducer 8"x4",6.35xHVY,ASTM A234 GR.WPB,B - 16.9,BW (STD)

Supply of Half Coupling 1/2",3000 #,ASTM A105,B - 16.11,SW,

Supply of Half Coupling 3/4",3000 #,ASTM A105,B - 16.11,SW

Supply of Full Coupling 1/2",3000 #,ASTM A105,B - 16.11,THRD.

Supply of S W Flange 1/2",150 #,ASTM A105,B - 16.5,RF

Supply of S W Flange 3/4",150 #,ASTM A105,B - 16.5,RF

Supply of S W Flange 1",150 #,ASTM A105,B - 16.5,RF

Supply of S O Flange 2",150 #,ASTM A105,B - 16.5,RF

Supply of S O Flange 3",150 #,ASTM A105,B - 16.5,RF

Supply of S O Flange 4",150 #,ASTM A105,B - 16.5,RF

Supply of S O Flange 8",150 #,ASTM A105,B - 16.5,RF

Supply of S O Flange 12",150 #,ASTM A105,B - 16.5,RF

Supply of Blind Flange 1",150 #,ASTM A105,B - 16.5,RF

Supply of Blind Flange 3",150 #,ASTM A105,B - 16.5,RF

Supply of Gate Valve 1/2",800 #,BODY A105, 13% CR. TRIM,API - 602,SW

Supply of Gate Valve 3/4",800 #,BODY A105, 13% CR. TRIM,API - 602,SW

Supply of Gate Valve 1",800 #,BODY A105, 13% CR. TRIM,API - 602,SW

Supply of Gate Valve 3",150 #,BODY A216 GRWCB, 13%CR,T,API - 600,RF

Supply of Gate Valve 4",150 #,BODY A216 GRWCB, 13%CR,T,API - 600,RF

Supply of Gate Valve 6",150 #,BODY A216 GRWCB, 13%CR,T,API - 600,RF

Supply of Gate Valve 8",150 #,BODY A216 GRWCB, 13%CR,T,API - 600,RF

Supply of Gate Valve 12",150 #,BODY A216 GRWCB, 13%CR,T,API - 600,RF

Supply of Globe Valve 4",150 #,BODY A216 GRWCB, 13%CR,T,BS-1873,RF

Supply of Globe Valve 8",150 #,BODY A216 GRWCB, 13%CR,T,BS-1873,RF

Supply of Check valve 4",150 #,BODY A216 GRWCB, 13%CR,T,BS-1868,RF

Supply of Check valve 8",150 #,BODY A216 GRWCB, 13%CR,T,BS-1868,RF

Supply of Deludge Valve 2",150 #,MNF. STD.,MNF. STD.,RF

Supply of Deludge Valve 4",150 #,MNF. STD.,MNF. STD.,RF

Supply of "T" Strainer 4",150 #,B: A234 GWPCW; INT: SS304,MNF. STD.,RF

Supply of "T" Strainer 8",150 #,B: A234 GWPCW; INT: SS304,MNF. STD.,RF

Supply of Gasket (Spiral Wound) 1/2",150# ,SS316+GRAFIL,B-16.20; ANSI B16.5,_,

Supply of Gasket (Spiral Wound) 1",150# ,SS316+GRAFIL,B-16.20; ANSI B16.5,_,

Supply of Gasket (Spiral Wound) 3",150# ,SS316+GRAFIL,B-16.20; ANSI B16.5,_,

Supply of Gasket (Spiral Wound) 4",150# ,SS316+GRAFIL,B-16.20; ANSI B16.5_,

Supply of 8",150# ,SS316+GRAFIL,B-16.20; ANSI B16.5,_,

Supply of Gasket (Spiral Wound) 12",150# ,SS316+GRAFIL,B-16.20; ANSI B16.5_,

Supply of Stud with Nuts M12x70,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, ( 0.5'' X 2.75'')

Supply of Stud with Nuts M12x80,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, (0.5'' X 3.0'')

Supply of Stud with Nuts M16x90,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, (0.625'' X 3.25'')

Supply of Stud with Nuts M16x95,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, (0.625'' X 3.75'')

Supply of Stud with Nuts M16x100,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, (0.625'' X 4.0'')

Supply of Stud with Nuts M20x110,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, ( 0.75'' X 4.25'')

Supply of Stud with Nuts M20x120,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, ( 0.75'' X 4.75'')

Supply of Stud with Nuts M24x130,-,A 193 Gr. B7/A 194 Gr.2H,B-18.2,-, ( 1.0'' X 5.25'')

Supply of Hose Box as per specification attacheched at tender

Supply of Water Spray Nozzle 1/2" NPT,-,BRASS (BODY, DEFLECTOR, DEFLECTOR PIN) (Angle 120 deg, K-Factor-22),MNF. STD.,THRD. (M)

Supply of 1/2" NPT,-,Glass Body, Detector, Made of Brass. (Blow Temp. 79 degC, K-Factor-80 metric),MNF. STD.,THRD. (M)

Supply of double headed hydrants as per specification attacheched at tender

Supply of Water Cum Foam Monitor as per specification attacheched at tender

Fabrication of CS NIBR (All grade & NB;thk=<10mm) piping: Fabrication of Carbon Steel NIBR (All grade & NB;thickness=<10mm) piping including dismantling(if any) of existing pipe lines & associated systems like drains,vents etc.by flame cutting, wheel cutting, hacksaw cutting, grinding; transportation of pipes, flanges, fittings etc. from owner's storage point to worksite; preservation of all materials, cleaning, marking etc. including supply of machineries, tools, tackles, manpower; fabrication including cutting, grinding, edge preparation as per job requirement, (inclusive of grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven, different thickness wherever required, )fit-up, welding, erection of pipes,valves and fittings of all types & thickness/routing over sleepers, overhead on racks etc. at all elevation including piping supports, DP testing, radiography , NDT as required by NRL with all arrangement for inspection, flange opening & box up, fixing of gaskets, loading arm, PD meter,bolts, nuts wherever required, cleaning, flushing by water,compressed air, hydrostatic testing , and any other type of testing as specified, drying by compressed air, including surface preparation , paint supply & application of paint as per specification, including necessary scaffolding, cleaning of the area, completing all such works in all respect as per specification, drawings & instruction of E.I.C.

Dismantling/removal of existing eqipment/machines & their subassemblies from foundation without any damage to Equipment/ machine /subassemblies/components using suitable earth moving equipment , sling transportation of the dismantled/removed Equipment/machine/subassembles to worksite using trailors of appropriate length and capacity & securing to trailers , assembly of sub-assemblies, placing the equipments/machines on foundations with appropriate capacity crane& slings, erection of assemblies/subassemblies , levelling, aligning, including chipping & dressing of foundations (if any) and providing necessary Scaffoldin, manpower for testing, commissioning, rectifying defects if any and completing the work in all respects . Includes Dismantling of structural members of roof, strucural frames,other structural members to facilitate dismantling / removal/ erection of the equipment/machines and again restoring the dismantled roof & frames .

Transportation of Rotating Equipment & miscellaneous items from Owner's storage points to work site / contractor's stores, assembly of sub-assemblies, placing the equipments on foundations, erection of interconnecting piping, levelling, aligning, including necessary scaffolding, chipping & dressing of foundations, grouting (including supply and application of non-shrink grout material), and providing manpower for testing, rectifying defects if any and completing the work in all manpower for testing, rectifying defects if any and completing the work in all Equipment) enclosed and instructions of Engineer-in-charge. - All Types of Pumps with Drivers (Electric Motor or General Purpose Steam Turbine) and accessories - Centrifugal Compressors with Electric Motor or Steam Turbine Drivers and accessories - Reciprocating Compressors with Electric Motor Driver and accessories mounted on foundation block - Epoxy Grout - Extra Charges for supplying and applying of Epoxy Grout -

Dismantling steel work: Dismantling of existing structural work by cutting; grinding; gauging; & making smooth the uneven cut surfaces and returning the cut out materials to NRL store including supply of all tools & tackles; equipments; machinery;consumables; necessary Scaffolding; manpower etc.

Removal of piping existing/erected including SW valves for modification as required as per required Drawings/P&IDs/instructions of Engineer-in-charge at all elevations, necessary scaffolding, including providing assistance to owner for draining, cleaning and purging of the lines to be removed , unbolting of flanged joints /cutting of pipe lines wherever required, installation of flanges and blind flanges, removal of insulation from insulated lines, removing supports, steam tracers, all fittings and flanges, instruments etc, cutting of pipes in appropriate length for transporting purposes, cleaning, flushing, drying and transporting all materials to storage point (within the complex battery limits) designated by Owner/ including stacking of material and disposing of waste etc as instructed by Engineer-in-charge.

Structural steel work: supply, Fabrication & erection of steel structural including for pipe supports; pipe racks ; staircases; hand rails; gratings; ladders; platfroms brackets etc. of all types; including supply of all tools & tackles; equipments; machinery;consumables; necessary scaffolding manpower etc.

Wrapping and coating in underground piping including application of primer; supply of material and all tools & tackles, heating torch; as per instruction of E-I-C

PAINTING (UNITS) :- Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per Job, drawings and direction of Engineer- in-Charge for all types of uninsulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves, provide necessary scaffolding etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified, in such cases finish paints shall also be applied in the fabrication yard. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. - PAINTING OF UN-INSULATED CS, AS & LTCS SURFACES DESIGN TEMP GROUP: -14 TO 80 (DEG C)SURFACE PREPARTION: SSPC-SP- 10PRIMER; 1 COAT OF F-9 @ 65-75 µ DFT/COAT+ 1 COAT OF P-6 @ 40 µ DFT/COAT + FINISH COAT : 2 COATS OF F 6B @ 100 µ DFT/COAT + 1 COAT OF F-2 @ 40 µ DFT/COAT; (2x100 + 40= 240) - PIPES

NB: .5 Inches

NB: .75 Inches

NB: 1 Inches

NB: 1.5 Inches

NB: 2 Inches

NB: 3 Inches

NB: 4 Inches

NB: 6 Inches

NB: 8 Inches

NB: 12 Inches

DESIGN TEMP GROUP: -14 TO 80 (DEG C)SURFACE PREPARTION:**N.A**PRIMER: 1 COAT OF P-6 @ 40 µ DFT/COAT + FINISH COAT : 2 COATS OF F 6B @ 100 µ DFT/COAT + 1 COAT OF F-2 @ 40 µ DFT/COAT; (2x100 + 40=240) - VALVES

NB: 2 Inches

NB: 3 Inches

NB: 4 Inches

NB: 6 Inches

NB: 8 Inches

NB: 12 Inches

MS Grating Cat. A,B - Non FIM Items Supplying, fabricating and erecting in position at all levels and locations ELECTROFORGED GALVANISED GRATING (purchased from approved manufacturer by the Contractor), provide scaffolding where required. walkways, platforms, stair treads etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing with manufacturer's supplied galvanised clamps, preparation and submission of fabrication drawings, all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).

Supplying and applying COATING (Post-erection/ Field) of approved quality and shade 1 coat of F-9 (inorganic zinc silicate) @ 65-75 micron DFT (or as per Job Specifications, wherever applicable) over the coat of shop primer already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement of scaffolding for access, testing etc. including touching up of shop primer coat (or as per Job Specifications, wherever applicable), for steel structures (excluding ladders, spiral stairways & hand rails) at all location & levels, all complete as specified, for UNIT (INLAND) areas considering environment classification as INDUSTRIAL. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE. (Unit rate based on Structural steel weight).

ELECTRICAL WORKS

Installation of Ladder type cable tray upto 600mm.GI CABLE TRAY : (Common specification for this & same category of items below) : Fabrication and installation of prefabricated hot dip galvanised Cable Tray with rigid welded construction fabricated out of hot rolled sheet steel of approved make as per approved drawings, specifications of this tender and directions of EIC (Annexure-G). Item includes fixing all matching related accessories and fittings like Bends, Tee Joints, Elbow Up/Down, Reducers, Fishplates, Splices, Cross Member, Connectors, Coupler Plates, Cover, Nuts, Bolts, Washers etc. supply and fixing of anchor fasteners, transportation of all materials from stores, yards and no separate charges will be applicable. Trays will be ladder type with a rung as per std. and galvanised 610 Grm./ Sq. Mtr. or 86 Microns. Cable Tray Bends shall also be fabricated or modified at site wherever required. Supply of GI Cable trays and structural supports for the cable tray shall be paid under separate items of BOQ.

Supply, fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports, poles etc. out of rolled MS sections, pipes, plates etc. including shot blasting, welding, bolting, riveting, supply of necessary anchor bolts, anchor fasteners and grouting etc., supply of paint and applying of anti-rust primer coat and finished coats of approved synthetic enamel paint as per specification suitable for highly corrosive environment, including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved specifications and directions of Engineer-in-Charge. (RCC foundation work will be under separate item in BOQ)

Fabrication and installation of steel structural work of any type (equipment, supports, cables trays etc.) fully assembled and erected including necessary supports, foundation etc. excluding supply of steel but including primer coat and finished coats of approved synthetic enamel paint suitable for highly corrosive environment, all labour and materials complete as per approved drawings and directions of Engineer-in-Charge. (Any item weighing up to 1 kg or less shall neither be measured nor paid).

Providing and laying in position specified grade of reinforced cement concrete (RCC), including the cost of centering, shuttering, finishing and reinforcement -Reinforcement of upto approx 80KG per cum (min 1% by volume) is considered inclusive in item : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Providing and laying plain cement concrete for all depths including tamping, ramming, vibrating,curing, shuttering, etc. all as specified in any shape, position, thickness, and finishing the top surface rough or smooth as specified and directed, including supply of all materials and all complete for concrete of M-20 grade with aggregates including all labour and materials as per specification and direction of E-I-C.

50 x 6 mm GI earthing strip GI EARTHING.: (Common specification for this & same category of items below) : Supply, installation and connection of following GI earthing strip including welding at Jointings, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc. along ground, on walls and structures , roofs of sheds and building etc.as required including all labour and materials, as per approved drawings, specifications of this tender and directions of EIC. ( Excavation and backfilling will be under separate item of BOQ)

Earth Electrodes : Supplying, providing and constructing GI Pipe Earth electrodes as Per IS:3043; GI Pipe Medium Class'B' 65 mm Dia; 3000 mm long complete with Earth Pit and all necessary materials including excavation of Earth Pit, filling with homogeneous layer of Charcoal and salt, Back filling, providing necessary Brick Masonry work, Plastering, MS/CI cover; Test links for connecting the earth Grid and Earth Electrode etc. complete as per Annexure D. This also includes testing of Earth resistance after completion as per Indian Electricity Rules. Minimum depth of burial shall be 3000 mm, homogenous hygroscopic material should not be less than 1 cum. & should cover 300 mm around the electrode up to a height of 2500 mm. Include 100mm dia GI pipe on all four sides for entry of earth strips. The scope of work also includes providing earth pit markers indicating resistance, test date, next due date etc. as per std. earthpit boards on GI plate of size @ 300 x300 mmx 2mm thick with a GI hollow section stand of of 25 mm square & length @ 1m; grouted in PCC 1:4:8 at a depth of @300 mm below the ground level and the top of plate should be @ 700 mm above the ground level.

Excavation and backfilling of trenches etc in all types of soil (except rock), shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth upto a distance of 100 metre including all labour and materials complete as per approved drawings, specifications and direction of Engineer- in-charge.(Excavated trench dimentions shall be measured)

Supply and installation of 75X10 mm GI earth plate (earth bus) 400mm long, 6 bolts 8mm dia complete with anchor bolts , supporting bolts etc including all labour and materials complete as per Annexure E and direction of E-I-C.

Panel etc. install: Weight upto 50 kg PANEL ETC. INSTALL: (Common specification for this & same category of items below) : E : Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, motors, misc. electrical panels and equipment, light fixtures, junction boxes etc., including transportation from store/yard to site at the place of installation, lifting the panels and equipment by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures,anchoring, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. The channel supports on cable trench required to position the panels etc. shall be measured and paid separately.

Panel etc. install: Weight more than 50 Kg to 100 kg PANEL ETC. INSTALL: (Common specification for this & same category of items below) : E : Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, motors, misc. electrical panels and equipment etc., including transportation from store/yard to site at the place of installation, lifting the panels and equipment by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures,anchoring, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. The channel supports on cable trench required to position the panels etc. shall be measured and paid separately.

Panel etc. install: Weight more than 100Kg to 500 kg PANEL ETC. INSTALL: (Common specification for this & same category of items below) : E : Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, motors, misc. electrical panels and equipment etc., including transportation from store/yard to site at the place of installation, lifting the panels and equipment by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures,anchoring, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. The channel supports on cable trench required to position the panels etc. shall be measured and paid separately.

Panel etc. install: Weight more than 500Kg to 1000 kg PANEL ETC. INSTALL: (Common specification for this & same category of items below) : E : Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, motors, misc. electrical panels and equipment etc., including transportation from store/yard to site at the place of installation, lifting the panels and equipment by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures,anchoring, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. The channel supports on cable trench required to position the panels etc. shall be measured and paid separately.

Panel etc. install: Weight more than 1000 kg to 3000 Kg PANEL ETC. INSTALL: (Common specification for this & same category of items below) : E : Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, motors, misc. electrical panels and equipment etc., including transportation from store/yard to site at the place of installation, lifting the panels and equipment by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures,anchoring, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. The channel supports on cable trench required to position the panels etc. shall be measured and paid separately.

Panel etc. install: Weight more than 3000 kg to 7000 Kg PANEL ETC. INSTALL: (Common specification for this & same category of items below) : E : Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, motors, misc. electrical panels and equipment etc., including transportation from store/yard to site at the place of installation, lifting the panels and equipment by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures,anchoring, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. The channel supports on cable trench required to position the panels etc. shall be measured and paid separately.

Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Cables with OD up to 20 mm

Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Cables with OD above 20 mm to 30mm

Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Cables with OD above 30 mm to 40mm

Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Cables with OD above 40 mm to 50mm

Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Cables with OD above 50 mm to 60mm

Termination of cable having outer diameter upto 40mm; CABLE TERMINATION : (Common specification for this & same category of items below) :Termination of armoured power cables (Typically PVC/XLPE insulated up to 1100 V grade). Job includes earthing the cable armour, connecting to the terminals, supply and marking of upto 1100V 3/3.5/ 4 core of size wire number ferrules/ cable tags (ss/ aluminium/ lead strip minimum 2 mm thick and 20 mm wide at the termination point), drilling in equipment,removal, cutting , fixing of gland plate, fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, consumable items like Crimping paste, insulation Tapes, Including Supply of cable WP GLAND and LUGS etc complete, including all labour and materials complete, as per approved drawings, specifications of this tender and directions of EIC.

Termination of cable having outer diameter above 40mm; CABLE TERMINATION : (Common specification for this & same category of items below) :Termination of armoured power cables (Typically PVC/XLPE insulated up to 1100 V grade). Job includes earthing the cable armour, connecting to the terminals, supply and marking of upto 1100V 3/3.5/ 4 core of size wire number ferrules/ cable tags (ss/ aluminium/ lead strip minimum 2 mm thick and 20 mm wide at the termination point), drilling in equipment, removal, cutting, fixing of gland plate, fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, consumable items like Crimping paste, insulation Tapes, Incliding Supply of cable WP GLAND and LUGS etc complete, including all labour and materials complete, as per approved drawings, specifications of this tender and directions of EIC.

Supply and spreading of fine river sand/stone dust in cable trenches etc, including all labour and materials as per direction of EIC.

Supply and spreading of bricks of 75mm thickness in cable trenches for cable protection including all labour and materials as per direction of EIC.

Laying of cables with outer diameter upto 40 mm. LAYING CABLE : (Common specification for this & same category of items below) : Laying, testing and commissioning of following sizes LV, MV & HV Cables and sealed properly of upto /3.5/ 4 of size PVC caps in designated cable route (in built-up readymade trenches; overhead cable trays; pull through pipes; exposed on wall/ beam/ rakes/ trusses tie/ beam/ embedded in floor or buried directly underground; or through G.I.pipe ). Cables shall be PVC/XLPE insulated; PVC Sheathed; FRLS armoured Aluminium/ Copper Cables or similar types as per IS:1554 (PART-I), IS 7098 PART I & IS 1225-latest version.; Unit rates quoted for installation of cables shall be same irrespective of route and method of laying. The item shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways etc. and supply and installation of saddles, spacers and nylon chord for tying as required, stainless steel/aluminium/lead strip identification tags at strategic points/ every 50 meter intervals, aluminium clamps. etc. The straight through Jointings/ tying of upto 1100V 3/3.5/ 4 core of size armour in the cables should be avoided/ minimised. (Structural steel, tray, pipe, excavation, sand and bricks shall be paid under separate item of BOQ). Item includes transportation from store/yard to site at the place of installation, unpacking, including all labour and materials.Empty drums and excess cable to be rerolled and transported back to desigated store/yard. The designated store/yard will be located inside NRL refinery site or NRMT.

Laying of cables with outer diameter above 40 mm. LAYING CABLE : (Common specification for this & same category of items below) : Laying, testing and commissioning of following sizes LV, MV & HV Cables and sealed properly of upto /3.5/ 4 of size PVC caps in designated cable route (in built-up readymade trenches; overhead cable trays; pull through pipes; exposed on wall/ beam/ rakes/ trusses tie/ beam/ embedded in floor or buried directly underground; or through G.I.pipe ). Cables shall be PVC/XLPE insulated; PVC Sheathed; FRLS armoured Aluminium/ Copper Cables or similar types as per IS:1554 (PART-I), IS 7098 PART I & IS 1225-latest version.; Unit rates quoted for installation of cables shall be same irrespective of route and method of laying. The item shall include laying, pulling of cables, proper dressing of cables on cable trays, racks, vertical raceways etc. and supply and installation of saddles, spacers and nylon chord for tying as required, stainless steel/aluminium/lead strip identification tags at strategic points/ every 50 meter intervals, aluminium clamps. etc. The straight through Jointings/ tying of upto 1100V 3/3.5/ 4 core of size armour in the cables should be avoided/ minimised. (Structural steel, tray, pipe, excavation, sand and bricks shall be paid under separate item of BOQ). Item includes transportation from store/yard to site at the place of installation, unpacking, including all labour and materials.Empty drums and excess cable to be rerolled and transported back to desigated store/yard. The designated store/yard will be located inside NRL refinery site or NRMT.

S/I:50mm NB GI PIPE : (Common specification for this & same category of items below) : Supply and laying of following sizes of G.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, union, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials,Sealing of upto 1100V 3/3.5/ 4 core of size Fireproof/Waterproof Compund, as per approved specifications and directions of Engineer-in-Charge.

S/I:100mm NB GI pipe.

S/I:150mm NB GI pipe.

S/I:150mm NB bend for GI pipe.

Supply and installation of Cable Markers with 14 SWG enamelled steel plate with white lettering on jade green background Sign (200X60-1no “BURIED ELECTRIC CABLE”, 60X60-2nos direction signs) on Angle (65X65X6, 1100 long, painted white, including PCC foundation), (inclusive of providing and fixing supports, including all labour and materials, complete as per Annexure F and directions of EIC)

BRICKWORK with common burnt clay locally available 1st class bricks for foundation and plinth etc. in Cement mortar 1:6 (1 cement : 6 coarse sand) incuding supply of bricks

CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand)

RCC/PCC structure Breaking using Demolition Breaker (any thickness)

Brickwork structure Manual Breaking (any thickness)

Chequered plate of M.S 6 mm thick - Supply, fabrication and installation for covering floor cut- outs/cable trenches etc., including all labour and materials as per EIC

Supply of sealing compound (Bituminous tar/eqv) heating & pouring of compound in the metallic pipes for providing effective cable sealing.

Paint char. 2"-4" in height/length

Making of LT cable joint for cables with OD upto 40 mm. HEAT SHRINK JOINTS : (Common specification for this & same category of items below) : Making of heat shrinkable type straight through joints for 1100 volt grade PVC/XLPE cables as per specifications, including cutting, stripping of cable insulation complete with supply of consumable, accessories etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge excluding supply of heat shrinkable jointing kit .

Making of LT cable joint for cables with OD above 40 mm. HEAT SHRINK JOINTS : (Common specification for this & same category of items below) : Making of heat shrinkable type straight through joints for 1100 volt grade PVC/XLPE cables as per specifications, including cutting, stripping of cable insulation complete with supply of consumable, accessories etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge excluding supply of heat shrinkable jointing kit.

Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 3/8" dia (10 mm) flexible rope.

Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 8 SWG GI Wire.

Supply, fabrication and installation of copper strips of requisite sizes (2mm thk, 30mm wide, 150mm long etc. as required) for earthing and bonding of pipelines, vessels, equipment (non-electrical) including all labour and materials as per direction of EIC.

Making horizontal bore under the WBM etc of the roads : Making horizontal bore under the WBM of the roads etc. manually or by machine for laying of upto 150 mm NB GI/ RCC pipes, excavating the side approach to facilitate boring, backfilling the same after completion of works including supply of tools , tackles,equipment etc. personal protective equipment to complete the job complete as required, excluding the supply of GI pipe as directed by Engineer-In -Charge.

Supply, fabrication and installation of canopies for miscellaneous outdoor equipment like motors, fire alarm points, telephones, communication hand set stations etc. to render them weatherproof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Dismantling and removal of lighting poles of all types; including disconnection of cables, removal of all fixtures and fitments, excavation and removal of pole etc., breaking of PCC/RCC foundation ;including transportation and storage upto distance of 10 KMs

20 x 3 mm GI earthing strip GI EARTHING.: (Common specification for this & same category of items below) : Supply, installation and connection of following GI earthing strip including welding at Jointings, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc. along ground, on walls and structures , roofs of sheds and building etc. including all labour and materials, as per approved drawings, specifications of this tender and directions of EIC. ( Excavation and backfilling will be under separate item of BOQ)

Installation. connection and commissioning of hazardous area Lighting pole as per Annexure -H, including all welding, structural works, paint and all sundry materials as required, including painting, including installation of of control gear box/junction box, FLP Fixture, glanding, termination, supply of lugs, blocking plugs etc. complete as required;including necessary excavation, RCC foundation work, backfilling, supply of cement, labour, all materials, removal of excess earth etc (excluding supply of control gear box/junction box, FLP Fixture, FLP Glands) but including all labour and materials complete, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply, Installation testing and commissioning of Feeders for 90 KW motors in existing vacant vertical of existing PMCC panel of make GEC ALSTOM; job includes SITC of Air Circuit Breaker of rating 1000 Amps, 3P, 415V, Icu=Ics=Icw(1s)50KA, with motor & manual spring charging, horizontal drawout type, electric and manual operation, control voltage 110V DC; SITC of numerical relay for motor protection with suitable protection features against Over/Undervoltage, No Load Running, Current Unbalance, Negative Sequence, Thermal Image, Overcurrent, Locked Rotor, Low Power Factor, Earth Fault, Control of No. of Starts, Trip Circuit Supervision, Over/Under Frequency etc. as may be required and with suitable features for digital communication with Electrical Control System (ECS) and Power Management System(PMS), Make:- ABB, Siemens, Schneider,GE,SEL; SITC of auxilliary relays, supply and installation of metering and protection class CTs; including all required panel componets such as switches, indicating lamps, MFM, interpanel wiring, control and power terminals etc. as may be required for complete commissioning and functioning of the system as per relevant standards and practises.

Testing and commissioning of MV motors above 55 KW including checking of all interface connections, change of grease wherever required, including supply of approved make of grease, no load/full load running of motor, including all labour and materials, as per approved drawings, specifications of this tender andr direction of E-I-C.

Testing and commissioning of MV motors upto 55 KW including checking of all interface connections, change of grease wherever required, including supply of approved make of grease, no load/full load running of motor, including all labour and materials, as per approved drawings, specifications of this tender andr direction of E-I-C.

Supply at site of 600 mm wide Ladder type cable tray.GI CABLE TRAY : (Common specification for this & same category of items below) : Supply of prefabricated hot dip galvanised Cable Tray with rigid welded construction fabricated out of hot rolled sheet steel of approved make as per approved drawings, specifications of this tender and directions of EIC (Annexure-G). Item includes supply of all matching related accessories and fittings like Bends, Tee Joints, Elbow Up/Down, Reducers, Fishplates, Splices, Cross Member, Connectors, Coupler Plates, Cover, Nuts, Bolts, Washers etc. and no separate charges will be applicable. Trays will be ladder type with a rung as per std. and galvanised 610 Grm./ Sq. Mtr. or 86 Microns.

Supply at site and installation of MCCB 250 Amps, 4pole, 50kA in existing cubicle panel board including drilling holes in cubicle panel, making connection including supply and installation of all accessories and cables, terminals etc. complete as required. (MCCB to be Microprocessor based with inbuilt ground fault protection, LSIG) IS/IEC 60947-2. Make L&T/Siemens/ABB/Schneider Operation 3 Phase 415 V AC 50/60 Hz, Ui 800VAC(insulation V), Uimp 8 kV (Impulse V) IP 3X (IEC/EN 60529), Utilization category A,HV withstand IEC 61439 Electronic trip units shall comply with Appendix F (EMC / EMI Compatibility)of IEC/EN 60947-2 The circuit breaker shall comply with the isolation function requirement of IS/IEC 60947-2 section 7.1.2. Operation temperature -5°C to 55°C without de-rating (upto 40°C ambient temperature). Release shall be True-RMS sensing. Vertical / horizontal mounting. Operating mechanism of the MCCB shall be quick make, quick break and trip-free type. It shall be possible to supply power either from the upstream or downstream side i.e. there shall be no Load-line bias. MCCBs shall have the feature of terminal finger proofing to avoid direct contact with the live parts. All poles shall operate simultaneously for circuit breaker opening, closing and tripping. The MCCB knob shall indicate the true position of the contacts. Front LED indication of Over Load (Ready, Over Load pre Alarm & Overload etc) MCCBs shall be equipped with microprocessor based trip units 'C' curve ans will include Extended rotary handle with external padlock facility for isolation. Enclosure for MCCB: The MCCB has to be supplied with outdoor type metallic enclosure having suitable cable boxes/cable compartment for incoming and outgoing cables and with supporting frame and stand. Application Std. IEC 61439-2, IP54 Enclosure metallic, IP43 after opening cover Indoor, Stand alone enclosure suitable for housing MCCB. All devices are located behind a lockable door and front shield to prevent unauthorised access. Extended rotary handle with external padlock facility for isolation. (Door should be suitable for fixing start/stop pushbuttons at later date). MCCB and its Enclosure and accessories shall be suitable for glanding and termination of two incoming and two outgoing suitable for 3.5C X 300sqmm armoured Al cable (with additional entry for 3C X 2.5 sqmm control cable). Suitable terminal spreaders to be provided. Removable bottom gland plates to make drilling & access easier. External and internal earthing points are to be provided.

Supply at site of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for outdoor terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Suitable for Cables with OD upto 20 mm.

Supply at site of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for outdoor terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Suitable for Cables with OD above 20 mm but upto 30 mm.

Supply at site of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for outdoor terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Suitable for Cables with OD above 30 mm but upto 40 mm.

Supply at site of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for outdoor terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Suitable for Cables with OD above 40 mm but upto 50 mm.

Supply at site of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for outdoor terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Suitable for Cables with OD above 50 mm but upto 60 mm.

Supply at site of 3.5core 35 sqmm MV power cables, stranded AL conductor, PVC/XLPE insulated, Flat Strip armoured, PVC sheathed, FRLS, 1.1KV (E) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 3.5core 120 sqmm MV power cables, stranded AL conductor, PVC/XLPE insulated, Flat Strip armoured, PVC sheathed, FRLS, 1.1KV (E) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 3.5core 50 sqmm MV power cables, stranded AL conductor, PVC/XLPE insulated, Flat Strip armoured, PVC sheathed, FRLS, 1.1KV (E) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 4core 4 sqmm MV power cables, stranded Cu conductor, PVC/XLPE insulated, Flat Strip armoured, PVC sheathed, FRLS, 1.1KV (E) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 3core 2.5 sqmm MV power cables, stranded Cu conductor, PVC/XLPE insulated, Steel Wire armoured, PVC sheathed, FRLS, 1.1KV (E ) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 10core 2.5 sqmm MV control cables, stranded Cu conductor, PVC/XLPE insulated, Steel Wire armoured, PVC sheathed, FRLS, 1.1KV (E ) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 2 core 4 sqmm MV control cables, stranded Cu conductor, PVC/XLPE insulated, Steel Wire armoured, PVC sheathed, FRLS, 1.1KV (E ) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of 2 core 6 sqmm MV control cables, stranded Cu conductor, PVC/XLPE insulated, Steel Wire armoured, PVC sheathed, FRLS, 1.1KV (E ) as per relevant IS standards, in steel cable drums; make KEI/Polycab/Gemscab/Elkay other as approved by EIC.

Supply at site of hazardous area Lighting pole as per Annexure -H, including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box, FLP Fixtures), but including all labour and materials complete, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.

Supply at site of Lighting / Power Panel (LP-6WAY- ) FLP, Ex-d, Gas grp IIC, temp class T6, I/C- RCBO 63A, 300mA (or 30mA for Power), TPN/4P - 1nos (with one spare hole for looping), O/G-MCB 10A 2pole C-curve – 6 nos FLP cable glands – 1 nos for Incomer, 2 nos for Outgoing. Complete with astronomical timer, contactors etc.as per approved drawings and direction of EIC-Incoming cable size 3.5C X 35 sqmm armoured with additional opening for loop cable of same size. Outgoing cable size 3C X 2.5 sqmm armoured copper cable. Certificates: Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur and carry ISI mark on nameplate itself as per IS: 2148:1981. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

Supply at site of following FLP lighting fixtures complete with lamps, requisite FLP cable glands, plugs and necessary control gear , including all labour and materials, specifications of this tender and directions of Engineer-in-Charge;Supply of Flame proof and weatherproof Well Glass Lighting Fixture with LED Lamp (100W) with integral driver for use in IIC classified areas; Ex-d; T6 ,Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur -suitable for incoming and loop cables of size 3C X 2.5 sqmm armoured Copper cable. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

Supply at site of following types of FLP and WP junction boxes, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.FLP (II C), Ex-d, and WP 4 way JB complete, each with 4 Nos. FLP (II C) cable glands and blocking plug, and suitable for cables upto 3C x 2.5 sq. mm YWY / XWY cable. Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

Supply at site of LCS with TNC switch, Ammeter, L/R switch,, FLP, GRP IIC, T6 suitable for 10C X 2.5 armoured Cu control cable. Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

Supply at site of 415V-5 PIN-63A PLUGS, FLAMEPROOF, GRP IIC, Ex-d,T6 with interlocking arrangement, terminals, adequately sized for outgoing cable including supply of double compression brass nickel plated cable glands. Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

Supply at site of 415V-5 PIN-63A SOCKETS, FLAMEPROOF, GRP IIC, Ex-d, T6 with interlocking arrangement, adequately sized cable adaptor box for incoming cable, terminals, blocking plugs for spare holes including supply of double compression brass nickel plated cable glands suitable for XLPE/PVC insulated armoured aluminium cable of size 3.5C X 50 sqmm with spare hole for looping I/C cable. Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

Supply at site of following FLP lighting fixtures IP65 complete with lamps, requisite FLP cable glands, plugs and necessary control gear , including all labour and materials, specifications of this tender and directions of Engineer-in-Charge;Supply of Flame proof and weatherproof Well Glass Lighting Fixture with LED Lamp (36W,) with integral driver, inverter and battery back-up (for 30 minutes) for use in IIC classified areas; Ex-d; T6; 240V AC supply Make: FLEXPRO or equivalent suitable for incoming and loop cables of size 3C x 2.5 sq. mm YWY / XWY cable. Certified by CMRI, Dhanbad for Group II C, CCOE Nagpur.. Certified metallic blocking plugs, Grp IIC, to be provided for all openings/gland holes

INSTRUMENTATION

Supply of Signal Cable (2Px1.5mm2,Blue) (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Signal Cable (1Tx1.5 mm2, Red) (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Signal Cable (6 Px1.5mm2, Blue) (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Flow Transmitter (FT) with complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of a set of Orifice Plate & flange Assembly as per BOM (an assembly of flanges and accessories with complete set of stud & bolts) (Note: datasheet, specification (including the MOC/ BOM) etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply). Qty-(i) 2"300#4 Nos (ii) 1.5"300#-1 No

Supply of a set of Restriction Orifice Plate Assembly as per BOM (an assembly of flanges and accessories with complete set of stud & bolts) (Note: datasheet, specification (including the MOC/ BOM) etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Pressure Transmitter (PT) along with complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Pressure Gauge along with complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Temperature Transmitter (TT)) along complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Temperature Element (TE), with Thermowell along with complete mounting accessories (stud/bolt/gasket and other consumables required for installation) (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Temperature Gauge with Thermowell along with complete mounting accessories (stud/bolt/gasket and other consumables required for installation) (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Gas Detector (Point type) along with complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Mass Flow Meter (MFT) assembly along with complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of TSV (3/4"x1") along with complete mounting accessories (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Remotely Operated Valve (8") , Fire Safe Blanket, Volume bottle (N2 Cylinder) along complete mounting accessories and mandatory spares (Note: Datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Cable Junction Box (Suitable for 6 Nos of cable size 1Px1.5mm2 & 6 Nos for 2Px1.5mm2 IN) and (2 Nos of cable size 12Px1.5mm2 OUT),Exd, Zone-2, Gr-IIC (Note: datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Cable Junction Box (Suitable for 2 Nos of cable size 12Px1.5mm2 IN) and (2 Nos of cable size 12Px1.5mm2 OUT) Exd, Zone-2, Gr-IIC (Note: datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Cable Junction Box (Suitable for 6 Nos of cable size 1Px1.5mm2 IN) and (2 Nos of cable size 6Px1.5mm2 OUT) Exd, Zone-2, Gr-IIC (Note: datasheet, specification etc. are mentioned/ attached elsewhere in this Tender Document. Accordingly, bidder shall comply).

Supply of Hardwares/accessories for CCTV camera for hook up with existing network (i) Encoder, Make : Indigo vision, Mode : VP888W4/P1, Qty-2 Nos (ii) 24 V Power Supply for Encoder, Make : Make : Meanwel, Qty-2 Nos (iii)Media Converter, Make : Sixnet, Model : SL-2ES-3SC, Qty-4 Nos (iv)12V Power Supply for Media Converter, Make : Meanwel-4 Nos (v) Pig tail (SC)-10 Nos (vi)Patch cord (SC/SC)-10 Nos (vii) AMP 230 V MCB-2 Nos (viii) LIU-1'X1' D-Link-2 Nos (ix) Surge Protector-2 Nos

Installation of Pressure gauge (direct) inclusive of mounting of instrument,supply and erection of supports, mounting on support, fabrication and installation of manifolds/ impulse lines with supports inclusive of supply of pipe, valves, pipe fittings, tube & tube fittings as per the installation standard/hook up drawing mentioned below, hydraulic testing of impulse and painting of supports, assistance in calibration, inclussive of supply of paints, as per direction of EIC but exclusive of supply of instrument & yoke. In Carbon Steel as per Standard for liquid/gas service enclosed elsewhere in the tender

Installation of Pressure Transmitter (direct) inclusive of mounting of instrument on yoke,supply and erection of supports, mounting on support, fabrication and installation of manifolds/ impulse lines with supports inclusive of supply of pipe, valves, pipe fittings, tube & tube fittings as per the installation standard/hook up drawing mentioned below, hydraulic testing of impulse and painting of supports inclussive of supply of supports & paints, Loop checking with DCS, assistance in calibration, as per direction of EIC but exclusive of supply of instrument & yoke In Carbon Steel as per Standard for liquid/gas service enclosed elsewhere in the tender

Installation of Flow Transmitter (direct) inclusive of mounting of instrument on yoke ,supply and erection of supports, mounting on support, fabrication and installation of manifolds/ impulse lines with supports inclusive of supply of pipe, valves, pipe fittings, tube & tube fittings as per the installation standard/hook up drawing mentioned below, hydraulic testing of impulse and painting of supports, inclusive of Paint and support, assistance in calibration of instrument & Loop checking with DCS as per direction of EIC but exclusive of supply of instrument, cable & yoke, In Carbon Steel as per Standard for liquid/gas service enclosed elsewhere in the tender

Installation of Temperature Indicators / Gauges (Filled system / Bimettalic) with flanged thermowell inclusive of installation of machined / builtup thermowells on the nozzle and installation of instruments, inclusive of supply of stud/bolt/gasket and other consumables as required for installation, assistance in calibration of instrument as per direction of EIC but exclusive of supply of TG & Thermowell.

Installation of Thermocouple with thermowell, inclusive of supply of stud/bolt/gasket and other consumables as required for installation, along with Temp. Transmitter remote mounted. Installation of transmitter including mounting on yoke, fabrication and erection of supports with clamps and laying of extension cable upto thermocouple, termination of cables at both ends, painting of supports, assistance in calibration of instrument & Loop checking with DCS as per direction of EIC but exclusive of Supply of Instruments, Cable & Yoke.

Installation of Hydrocarbon Gas detectors on yoke, fabrication and erection of supports as required, painting on supports & Loop checking with DCS, inclusive of supply of supports and paints

Cleaning, calibration of Hydrocarbon detectors, providing equipments necessary for calibration, test reports, all consumable, inclusive of supply of calibration gas cylinders

Installation of Remote Operated valve (ROV) accessories, inclussive of studs/bolts/gasket as required for installation, tubing works as per installation standard/pneumatic hook up drawing, inclusive of supply of tube, valve and tube fittings, Cleaning, adjusting stroke/ positioner, stroke speed of ROV , necessary testing with Instrument Air/Nitrogen Cylinders, as per specification/drawing provided elsewhere in the tender, providing supports, painting of supports inclusive of supply of supports and paints,as per the direction of EIC, exclussive of supply of ROV, Firesafe box, N2 Cylinder.

Installation of Volume bottles and accessories like quick exhaust relay etc. including tubing with Remote Operated Valves

Installation of Fire Safe Box/Fire safe blanketing as per Standard/drawing for ROV

Installation of Mass Flow Meter assembly, installation of transmitter on yoke, connection of cable from sensor to transmitter, as per installation standard, inclussive of studs/bolts/gasket as required for installation,providing supports, painting of supports inclusive of supply of supports and paints & Loop checking with DCS as per the direction of EIC, exclusive of supply of MFT & Yoke

Functional checking and commissioning of Mass Flowmeter by deputing OEM commissioning engineer

Installation of Junction Box (Signal/Control/Power), 6Pair on supports, fabrication of JB support as per drawing, painting inclusive of supply of supports and paint

Installation of Junction Box (Signal/Control/Power), 12Pair on supports, fabrication of JB support as per drawing, painting inclusive of supply of supports and paint

Supply, Fabrication, installation / erection/ mounting of 2 mm Thick MS canopy of various sizes for instruments (including painting of the canopy (1 coat red oxide primer & 2 coats finished paints)) including the supply of 2 mm thick MS sheet required, MS Angle/Flat etc. required for fabrication of canopy including the supply of paints, mounting accessories.

Supply, Fabrication, installation / erection/ mounting of 2 mm Thick MS canopy of Junction Box (including painting of the canopy (1 coat red oxide primer & 2 coats finished paints)) including the supply of 2 mm thick MS sheet required, MS Angle/Flat etc. required for fabrication of canopy including the supply of paints, mounting accessories (8 mm GI U-clamp/nut/bolt etc.)for mounting on JB frame exclussive of supply of JB frame.

Supply,Fabrication & Installation of Yoke (I-stand),for transmitters/instruments 2", height 1300 MM as per drawing/standard, painting, inclusive of supply of paint as per direction of EIC

Dismantling and Reinstallation instrumentation items relating to PD Meter & air eleminator and and associated services,. , painting of supports as per direction of EIC inclusive of supply of stud/bolts/gasket/paints/supports and other accessories as required for installarion, exclussive of supply of PD Meter & air eleminator assembly

Dismantling and Reinstallation of RTD unit and associated services, painting on supports as per direction of EIC inclusive of supply of stud/bolts/gaskets/paints/supports and other accessories as required for installation, exclussive of supply of RTD unit.

Dismantling and Reinstallation of instrumentation items relating to Digital Control Valve Accessories with associated service instruments (limit switch & SOV etc.) and associated services like painting on supports as per direction of EIC inclusive of supply of stud/bolts/gaskets/paint/supports and other accesories as required for installation, exclussive of supply of DCV assembly.

Dismentling and Reistallation of Weight & Measurement unit and associated services, painting on supports as per direction of EIC inclusive of supply of stud/bolts and gasket as required for W&M switch

Dismantling and Reinstallation of Arm in Position unit and associated instruments as per direction of EIC inclusive of supply of stud/bolts and accesories as required for installation exclussive of supply of Arm in Position unit.

Dismantling and Reinstallation of Earth Relay and associated instruments as per direction of EIC inclusive of supply of stud/bolts and accesories as required for installation exclussive of supply of Earth Relay.

Dismantling and Reinstallation of RIT unit and associated services, painting of supports as per direction of EIC inclusive of supply of stud/bolts/supports/paints and accesories as required for installation exclussive of supply of RIT

Dismantling and Reinstallation of Card Reader Unit and associated services, . , painting of supports as per direction of EIC inclusive of supply of stud/bolts/paints and accessories as required for installation exclussive of supply of Card Reader

Dismantling and Reinstallation of Emergency Shutdown Switch(ESD) and associated services, painting of supports as per direction of EIC inclusive of supply of stud/bolts/supports/paints and accesories as required for installation exclussive of supply of ESD switch

Installation Of Break Glass Unit(BGU) and associated services, painting of supports as per direction of EIC inclusive of supply of stud/bolts/supports/paints and other accesories as required for installation exclussive of supply of BGU

Dismantling & Reinstallation of 2 Nos of CCTV, hook up with existing network and associated services required for commissioning of cameras as per direction of EIC

Supply & Installation of prefab. galvanised iron perforated Trays upto 60 mm (W) x 20 mm (H) and its supports including tees, bends and elbows, connecting plate, GI nut bots, painting of supports including supply of supports, paint as per specifications attached elsewhere in the tender.

Supply & Installation of prefab. galvanised iron perforated Trays upto 150 mm (W) x 20 mm (H) and its supports including tees, bends and elbows, connecting plate, GI nut bots, painting of supports including supply of supports, paint as per specifications attached elsewhere in the tender.

Supply & Installation of prefab. galvanised iron perforated Trays upto 300 mm (W) x 20 mm (H) and its supports including tees, bends and elbows, connecting plate, GI nut bots, painting of supports including supply of supports, paint as per specifications attached elsewhere in the tender.

Supply & Installation of prefab. galvanised iron Ladder Trays upto 450 mm (W) x 100 mm (H) and its supports including tees, bends and elbows, connecting plate, GI nut bots, painting of supports including supply of supports, paint as per specifications attached elsewhere in the tender.

Laying of instrumentation cables (1Px1.5mm2) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of instrumentation cables (2Px1.5mm2) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of instrumentation cables (1Px16 AWG) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of instrumentation cables (1Tx1.5mm2) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of instrumentation cables (6Px1.5mm2) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of instrumentation cables (12P x1.5mm2) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of instrumentation cables (8T x2.5mm2) on ducts, main trays, perforated trays, angle trays, trenches , including clamping and fixing identifying tags and megger testing.

Laying of Fibre Optic/system cables on ducts/main trays/perforated trays/angle trays/trenches, clamping, glanding the cables, termination at both ends including shields , providing and fixing of identifying tags and testing but exclusive of supply of fibre Optic/System cable

Glanding & Termination (Cable Gland 1/2" NPT) for (1Px1.5mm2) (1Px16/18 AWG) (1Tx1.5mm2) & Power Cable (3C x2.5mm2) at instrument side/ JB side/Panel side inclusive of supply of ferrules and other consumables

Glanding & Termination (Cable Gland 3/4" NPT) of Signal/control Cable (2Px1.5mm2) at instrument side/ JB side/Panel side inclusive of supply of ferrules and other consumables

Glanding & Termination (Cable Gland 1" NPT/ET) Signal/Control Cable (6Px1.5mm2) at instrument side/ JB side/Panel side, inclusive of supply of ferrules and other consumables

Glanding & Termination (Cable Gland 1.5" NPT/ET) Signal/control Cable (12Px1.5mm2) at instrument side/ JB side/Panel side inclusive of supply of ferrules and other consumables

Glanding & Termination (Cable Gland 1.5" NPT/ET) Signal Cable (8T x2.5mm2) at instrument side/ JB side/Panel side, inclusive of supply of ferrules and other consumables

Erection of GI Air lines and fittings For size 1/2". including supply/ fabrication/erection of supports, pneumatic testing and painting of supports but exclusive of pipe and fittings as per Standard

Supply of Skilled Manpower for Commissioning assistance

Supply of Unskilled manpower for Commissioning assistance

M/s. Sparkon Engineers

PUNJAB ENGINEERING COMPANY (PROJECT DIVISION)

M/s P.K.M. ERECTORS

North East Engineering n Construction

ASSOCIATED WORKS INFRA PVT. LTD.