COMPREHENSIVE MAINT AND REPAIR TO PLUMBING, SANITARY FITTING AND ALLIED WORKS IN MD ACCN OF JK, CHARARI, N2 ROAD, KAJIKHERA AND SUBHAS ROAD AT AFS CHAKERI KANPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish from the MD land complete all as specied and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. laid over and including 15mm thick screed bed in CM (1:6) including jointing in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

M & L for glazed ceramic tiles coloured of size 300mmx450mmx 7 to8 mm thick as on walls over and including 10mm thick rendering in CM (1:4) and jointing in neat cement slurry and pointing in coloured cement to match the shade of tiles complete all as specified and directed.

Cutting chases on brick wall for concealed water tubing, drilling wall from one side to another side and making good to facings where required and pointing in CM (1:3), cutting not exceeding 10 CM girth complete all as specified and directed.

S & F Green marble work 16 to 18mm thick (One peice, table rubbed and polished) on cooking platforms and like jointed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade cutting, polishing and slightly moulding open edge over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise provided for complete all as specified and directed.

M & L for RCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in plateform slab, shelves etc including necessary formwork complete all as specified and directed.

S & F TMT MS bars 8mm dia and above, bars cut to length, bent to shape required including cranking bending spirally for hooping for columns and binding with and including MS wire not less than 0.9 mm dia complete all as specified and directed.

Demolition of brick work built in Cement Mortar complete all as specified and directed.

M & L for brick work with fly ash brick straight or cuved on plan exc 6.0 mtr mean radius built in CM (1:6) complete all as specified and directed.

Labour only brick work with sub class 'B' brick straight or curved on plan exceeding 6.0 mtr mean radius built in CM (1:6) complete all as specified and as directed.

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connection cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm old serviceable/ unserviceable steel tuning any grade and connection including cleaning for removal to store complete all as specified and directed.

S & F for 15 mm bore steel tubing medium grade, galvanized with all fittings such as bend, elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting, threading and making forged bends on pipes MS hooks etc complete all as specified and directed.

S&F for 20 mm bore steel tubing medium grade, galvanized with all fittings such as bend, elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc complete all as specified and directed.

Re-fixing of 15 mm bore old steel tubing and connection in new or old position fixed in wall or floor, ceiling etc. complete all as specified and directed.

Re-fixing of 20 mm bore old steel tubing and connection in new or old position fixed in wall or floor, ceiling etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces etc complete all as specified and directed.

M & L for 15 mm thick rendering in CM (1:4) on fair faces of concrete or brick surface mixed with and including water proofing compound as per manufacturers instruction finished even and smooth without using extra cement and applying three coat of white wash after preparation of surfaces complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall or concrete surfaces in 1:6 cement mortar finish even and smooth without using extra cement and applying two coat of oil bound distemper including 1 to 2 mm wall care putty over one coat of primer after preparation of surfaces complete all as specified and directed.

M & L for 10mm thick plastering on ceiling surfaces in CM (1:6) finished even and smooth without using extra cement and applying three coat of white wash after preparation of surfaces complete all as specified and directed.

S & F in repair of 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 142 gms) complete all as specified and directed.

S & F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 210 gms) complete all as specified and directed.

S&F in repair 15 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe complete all as specified and directed.

S&F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe complete all as specified and directed.

S & F in repair 500 ltr rotatational moulded polyethylene white colour water storage tanks (cylindrical vertical with closed top) triple layer construction, arrangement to screwed the lid cover, ISI mark hoisted & fixed in position complete all as specified and directed.

S & F in repair vitreous china squatting pan Orissa pattern 580mmx440mm with integral foot rest “white” with P or S trap (excluding flushing cistern and flush pipe) but including connecting to trap and flush pipe, anti-syphonage pipe etc complete making good to floor and complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC low level dual flushing cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. Make- Prayag cat Part No 502 DUO or equivalent in Cera/Kohler as approved by GE in writting.

M & L for repairs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend including replacing of rubber washer cheek nuts plunges/flush etc for any type of flush complete all as specified and directed.

S & F in repairs stainless steel kitchen sink with drainage board of over all size 914X460X203 mm and bowl size 405 mm X 354 mm X 203 mm, 1 mm thick with plug washers and wastes; including bedding in CM (1:3) to dwarf wall or including fixing cantilever brackets, waste pipe and connecting union to pipe complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white, flat back, size 550mm X 400 mm excluding taps, wash, chain and plug and procelain stopper but including brackets, coupling complete all as specified and as directed.

S & F in repairs waste coupling for steel sink complete all as specified and directed Make - Prayag, cat No-SA-03 or equivalent in Cera/ Essco

S & F in repairs 32mm PVC waste coupling for WHB complete all as specified and directed. Make- Prayag, cat No- 103/101 or equivalent in Cero/ Essco

S & F in repairs 32mm PVC waste Pipe for WHB/sink complete all as specified and directed. Make- Prayag, cat No- 3272 or equivalent in Cera/ Essco

S & F in repairs 15 mm dia pillar taps of PTMT any colour scewed for iron pipe (Min Wt 110 Gms) complete all as specified and directed.

S & F in repair 15mm size PVC Connection 450 mm long with two PTMT nuts complete all as specified and as directed.

S & F in repairs stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms) complete all as specified and directed.

S & F in repairs angle stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms) complete all as specified and directed.

S & F in repairs 100 mm dia grating of PTMT (Min Wt 25 Gms) complete all as specified and directed.

S & F in repairs tubular towel rail 60 cm long of PTMT fixed with screws and wooden/plastic cleats (min wt 60 gms) complete all as specified and directed.

S & F PVC lid for water storage tank suitable for 500/1000 ltr capacity complete all as specified and directed.

S & F in repair MS kitchen sink/WHB bracket as fixed in CM (1:3) or PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates complete all as specified and directed.

S & F in repairs Bib taps standard of PTMT,15 mm dia any colour screwed for iron pipes (Min Wt 90Gms) complete all as specified and directed.

S & F in repair 15 mm bore Swivel shower of PTMT any colour for fixing with15mm pipe (Minimum weight 40gms) complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes, etc capacity exe 250 ltr but not exceeding 500 ltr complete all as specified and directed. Note- Date of cleaning should be mentioned over each tank by synthetic enamel paint and unit rate shall be inclusive of this.

S & F prelaminated solid PVC door frame of size 50 mm x47 mm made out of 5 mm colour PVC sheet reinforced with MS tube complete all as specified and directed.

S & F factory made both side prelaminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of double side prelaminated PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S & F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and directed.

S & F Aluminium handles extruded type, anodised of 125 mm size complete all as specified and directed.

Easing of door shutters for easy closing / opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

S & F in repair 75mm long double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as speficied and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as speficied & directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed.

S & F for 4 mm thick plain/frosted sheet glass as per site requirement ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane upto 12th storey complete all as specified and directed.

S & F in repair curtain rods of cromium plated mild steel conduit pipe 19mm dia with wall thickness 1mm including chromium plated bracket holders for holding of rods and fixed with screws to pelmet boxes/wall complete all as specified and directed.

Dismantling mild steel Work of any description fixed in any position not otherwise provided for complete all as specified and directed.

Taking down chowkhet or frame not exceeding 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

Ditto all as per item no. 61.00 here in before but exceeding 1.50 Sqm but not exceeding 4.00 Sqm complete all as specified and directed.

Taking down shutter exceeding 1.0 Sqm and not exceeding 2.0 Sqm all as specified and directed.

S & F plain solid straight chowkhat or frame rebated on the solid rounded or chemferred put together with glue pinned at joints in 2nd class HW complete all as specified and directed.

M & L for 35 mm thick IInd class HW factory made glazed and skelton shutters open rebated sand prepare to receive glass/gauge etc, without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F mild steel helical door spring 150 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repair mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F for 250mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repair 250mm mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed

S & F 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S & F in repair 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and directed.

Taking down steel chowkhat or frame with shutters (wihtout taking of shutter from frame ) of any description etc complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M & L for MS work such as grills, grating, hold fast etc with end of bars shouldered and/ or reveted or forged in to spikes framed guard bars barred iron doors ; ladders; framed balusters, walk ways railing, framework of water tanks and simillars works conforming to Fe 410 Gde-310 complete all as specified and directed.

M & L for PCC (1:2:4) type B1, using 20mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similer work complete all as specified and directed.

S & F rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed.

M & L for 75 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregates as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for forming contration (Dummy) joint 65mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thick below or above ground level including tiles, etc and removing rubbish out of MD land complete all as specified and directed.

S & F in repair PVC SWR pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 110 mm dia bore (in fitting) PVC (SWR) bend or Tee or Y any radius complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying one coat of white wash complete all as specified and directed.

Ditto all as per item No.91.00 here-in-before but on ceilings.

M & L preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated surfaces of walls and applying two coat of oil bound distemper over & including one coat of primer and 3 mm thick wall care putty complete all as specified and directed.

M & L for preparation of old painted wooden /wood based surface of any description exceeding 10 cm width or girth by washing down with solution of alkaline soap to remove all loose dirt and oily & grease spots and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto all as per item No.95.00 here-in-before but on steel surfaces.

S & F in repairs 15 mm dia bib tap cast copper alloy CP long body with capstan head long body and cup screwed down for iron pipe complete all as specified and directed.

S & F in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S & F in repairs 15 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs stop valves (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee union, reducer, nipple long screw both end complete etc for 15 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee union ,reducer, nipple long screw both end complete etc for 20 mm bore pipe (ISI marked) complete all as specified and directed.

S & F in repair for 40mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ Sqcm laid in trenches/under floor complete all as specified and directed.

Taking down/removing of existing water proofing treatment on roof and wall surfaces complete with screed bed, mud phuska etc racking out joints, hacking for key scrubbing down with water etc. and including removing the rubbish out of MD land and carry out the following works for water proofing treatment respectively complete all as specified and directed - (a) M & L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface all as directed. (b) M&L for 15 mm thick (average) screed bed in CM (1:3) finishing the surface even and smooth without using extra cement mixed with waterproofing compound as per manufacturers instruction complete all as specified and directed. Note-Water proofing compound shall be measured and paid seperately under respective items.

M & L for providing and applying fiber reinforced elastomeric liquid water proofing memberane with resilient acrylic polymers having sun reflective Index (SR) as specified and make as approved by GE in writting. On the top of roof from parapet to parapet in three coats @ 10.76 litre per 10 Sqm by mechanical or sprayer as directed by GE/Engr-in-charge. One coat of self priming of elastomeric water proofing liquid and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete allocation/system should not be less than 500 microns). The loose particles should be removed with wire brushes, complete in all respect as per the instruction direction of Engineer-in-Charge. Make- Asian Paints/ Piddilite/Sika/STP/Berger Paints Note : Treatment shall be done through authorised representative of manufacturers.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for framed MS work as in steel doors or gates of angle or other section including gusset plates, rails, bracket, MS plate, sheet etc complete drilled for fixing of steel sheeting or other covering etc and simillars works conforming to Fe 410 complete all as specified and directed.

P.N. BROTHER

M/S SDS Construction Co.