Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.0 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹14.4 L+₹750.70 (0.05%)Rejected-Finance NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Highest | |
| 3 | L3₹15.5 L+₹1.1 L (7.54%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Highest |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
30 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
INTEGRATED DAY TO DAY MAINTENANCE OF BR NATURE AT JALIPA MILITARY STN UNDER GE ARMY BARMER
2022_MES_564779_2
8680/E8
Open Tender
Civil Works
Item Rate
330 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹28,000
18 Feb 2023
4 Jan 2023
4 Feb 2023
4 Jan 2023
30 Jan 2023
11 Jan 2023
Amount
Taking down cement or cement lime plaster, any description on brick or stone/block walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear for plastering complete all as specified and directed.
M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, mixed with water proofing compound as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC are measured and paid separately.)
M&L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.
M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed. (Note : All plastering work will be done in patches of any qty and any size complete all as specified and directed )
M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed.
All as per item No. 5 above but n exc 15 cm in width or girth.
M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of interior wall primer over 2mm thick wall care putty complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of ceiling, including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of cement based paint complete all as specified and directed.
M&L for Complete removal of existing treatment, plastered or unplastered old surfaces of walls, including filling of cracks/holes by crack filler, removing unnecessary nails applying two coats of distemper oil emulsion over a coat of interior wall primer over 2mm thick wall care putty complete all as specified and directed.
Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed.
M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.
M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per Sl item No 17 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as required and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.
S&F for Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for walling of random rubble uncoursed ,well bonded ,bedded and solidly hearted built in CM (1:4) and brought up to course complete all as specified and directed.
M&L keyed pointing in CM (1:4) to random rubble masonry, un coursed complete all as specified and directed .
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after repairing complete all as specified and directed.
S&F in repair 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed .
Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed .
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
S&F for pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and directed.
S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and directed.
S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and directed.
M&L for 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.
M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wood and wood based surfaces of any description over 10cm in girth or width and painting with one coats of synthetic enamel paint complete all as specified and directed.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors, complete all as specified and directed. and directed.
S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.
S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as specified and directed .
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.
S&F for 150mm size aluminium anodized handle complete all as specified and directed.
S&F in repair 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 150mm size aluminium anodized handle complete all as specified and directed.
S&F for 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
S&F in repair 75mm size MS handles, fixed to steel window screwed or welding as required at site complete all as specified and directed.
M&L for running welding in repairs for metal thick not exc. 6mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding & bevelling of edges as required, complete all as specified and directed.
M&L for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded N exc 6mm complete all as specified and directed.
M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
M&L in repair 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F in repair Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with & including a minimum of 6 nos bolts & nuts four on bolt & two on staple plate complete all as specified and directed .
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and directed.
M&L for preparation of New or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and directed.
S&F for Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
S&F for 3mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.
M&L for Prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping on exterior face, fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves including dismantling of boarding any description fixed in any position with nails complete all as specified and directed.
S&F 30mm width of flaps (When open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised.
S&F in repair Drapory rod 25mm dia alluminium alloy powder coated fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw complete all as specified and directed.
S&F in repair 25mm dia stainless steel curtain rod with fancy type fixing brackets, stops, rollers etc. complete all as specified and directed .
S&F in repair sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and directed.
S&F in repairs sheet glass shelf aasembly consisting of 5.50 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing of 600 mm long complete all as specified and directed.
S&F in repair aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.
S&F in repair 100mm size mortise lock, Aluminium, vertical type, four leavers, all as specified and directed.
Dismantling of 100mm internal dia cast iron pipes including fittings, jointed in cement mortar complete all as specified and directed.
Dismantling of 75mm internal dia cast iron pipes including fittings, jointed in cement mortar complete all as specified and directed.
S&F for 100mm bore sand cast, cast iron, soil, waste and vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls complete all as specified and directed.
S&F for 75mm bore sand cast, cast iron, soil, waste and vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls complete all as specified and directed.
S&F for 100mm bore of pipe cast iron vent cowls suitable for complete all as specified and directed.
S&F for 100mm bore pipe cast iron branch pieces fitted with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches complete all as specified and directed.
S&F for 75mm bore pipe cast iron branch pieces fitted with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches complete all as specified and directed.
S&F for 100mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F for 75mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
Cutting chases in Brick walls, Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and directed.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.
S&F for 16mm bore of CPVC of food grade pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.
Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.
Dismantling of water tanks of capacity Exc 250 and n exc 500 ltrs (RCC hume Pipe/PVC) including disconnecting all connections etc. complete all as specified and directed.
All as per Srl Item No 84 above but Exc 500 and n exc 1000 ltrs.
All as per Srl Item No 84 above but Exc 1000 and n exc 2000 ltrs.
S&F for new rotational moulded polythylene water storage tank of capacity 500 ltrs (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.
All as per Sl Item No. 87 above but 1000 ltrs.
All as per Sl Item No. 87 above but 2000 ltrs.
All as per Sl Item No. 87 above but except water tank & ball valve.
All as per Sl Item No. 88 above but except water tank & ball valve.
S&F in repairs 15mm bore Ball valves highpressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
S&F in repairs 20mm bore Ball valves highpressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
S&F in repairs 25mm bore Ball valves highpressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 250Ltrs and n exc 500Ltrs capacity complete all as specified and directed.
Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 500Ltrs and n exc 1000Ltrs capacity complete all as specified and directed.
S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair two way 15mm bore CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm bore two way Bib taps (for health faucet/jet spray) fancy type, chromium plated, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and 32mm PVC waste pipe etc complete all as specified and directed.
S&F in repairs wash hand basins, Pillar tap, PVC connection and waste pipe of any description except WHB for fixing of brackets complete all as specified and directed.
S&F in repair MS angle cantilever brackets 0.45m length for WHB of standard size with cement mortar including prepration of steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.
S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including trap, 32mm PVC pipe and provn of cement concrete bedding complete as fixed complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including P or S trap, connection to drain (or outgoing pipe) and to flushing pipe 32mm PVC with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including waste pipe complete all as specified and directed.
S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and directed.
S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed..
S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.
S&F in repairs 75mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and 32mm dia PVC waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repairs stainless steel kitchen sink with drainage board, of any description after fixing cantilever brackets and connecting union to waste pipe except sink complete all as specified and directed.
S&F in repair MS angle cantilever brackets 0.60m length of standard size with cement mortar including prepration of steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repairs stainless steel plate rack of size 600mm X 600mm X 250mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed.
S&F in repair 15mm bore Bib tap fancy type of PTMT any colour high pressure screwed for iron ipe and fixed. (Minimum weight 15mm- 120gms) complete all as specified and directed.
S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
S&F in repairs 15mm bore stop valves ,cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and directed.
S&F in repair 15mm bore dia pipe CP wall mixer for mixing (HOT/COLD) water, with wall cap/band of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed.
S&F in repair 15mm bore Brass CP sink mixer fancy type with swinging casted spout (wall mounted type) for kitchen sink screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm bore centre hole basin mixer fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' and `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair 32 to 40mm dia PVC waste pipe for WHB/sink/Urinal complete all as specified and directed.
S&F in repair Jet Spray (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.00 metre long flexible tube including making connections and fixed in position complete in all respect complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.
S&F in repair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.
S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified.
S&F in repair SS soap dish, approximate size 150x 150x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
S&F in repairs stack clamps made out of 20 X 1 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore of pipe complete all as specified and directed.
S&F in repairs stack clamps made out of 20 X 1 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.
S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm provided with access door complete all as specified and directed.
S&F PVC (SWR) bend any radius 75mm provided with access door complete all as specified and directed.
S& F in repairs 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and directed.
S& F in repairs 75 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and directed.
S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed.
S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and directed.
S&F in repair 150mmX150mm size salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' or 'Q' complete all as specified and directed.
S&F in repair plastic water closet seat for pedestal/semi pedestal closet pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .