REPAIR REWIRING OF INTERNAL ELECTRIC WIRING AND LIGHT FITTING, FLAME PROOF WIRING, FLAME PROOF FITTINGS, SUMMER AND COOLING APPLIANCES, GEYSER AT TECH AREA TAKU, CPE ITARSI

Amount

M&L for light Point wiring with PVC insulated unsheathed FRLS 1.5 Sqmm multi stranded copper conductor cable 1100 Volts grade & 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit as concealed conduit not less than 19/20 mm dia with all fittings, shunk in MS Pressed steel terminal boxes suitable depth and 1.6mm thick (duly painted with two coat of anti corrosive paint out side and Aluminium paint inside) with top cover 3.0mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete including taking down existing unservicable point wiring, fixtures & fittings complete all as specified and directed Engr-in-Charge. Note : (i) On RCC roof/ceiling PVC conduit will be carried out by proper fixing with clips (ii) Colour coding should be maintained.

All as per item No. 1 but for ceiling/exhaust fan point wiring

All as per item No. 1 above but with socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 1 above but with One socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 1 but for call bell point wiring.

All as per item No. 1 above but with 2.5 Sq mm for one 15 Amps socket outlet on independent board and 2.5 Sq mm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

M&L for light Point wiring with PVC insulated unsheathed FRLS 1.5 Sqmm multi stranded copper conductor cable 1100 Volts grade & 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC casing & caping surface/on wall with all fittings, suitable for surface mount fittings/gangbox complete including taking down existing unservicable point wiring incl fixtures & fittings complete all as specified and directed Engr-in-Charge. Note: (i) On RCC roof/ceiling PVC conduit will be carried out by proper fixing with clips (ii) Colour coding should be maintained.

All as per item No. 7 but 5 amp independent Switch Socket combined complete.

All as per item No. 7 but with 2.5 sq mm for 15 amp independent Switch Socket combined complete.

M&L for Sub main wiring with PVC insulated, unsheathed, multistranded copper condurtor FRLS cable of size 3 runs of 4 Sqmm (Phase, neutral & earth) drawing into PVC conduit complete including taking down existing unservicable sub main wiring and making good the disturbed surfaces of wall/ floor etc all as specified and directed.

M&L for Sub main wiring for sub main DB's with PVC insulated, unsheathed, multistranded copper condurctor FRLS cable of size 3 runs of 6 Sqmm (Phase, neutral & earth) drawing into 25mm dia surface Steel conduit complete, including taking down existing unservicable sub main wiring and making good the disturbed surfaces of wall/ floor etc all as specified and directed.

S&F for Switch piano flush button type single pole, one way 5 Amps, 240 Volts, complete all as specified and directed.

S&F for Socket outlet 5 pin, 5 Amps, 240 volts flush type complete all as specified and directed.

S&F bell push piano flush type 6 Amps, 240V complete all as specified and directed.

Supply and fixing calling bell ding dong, AC 230 volts single phase complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 5 Amps flush type, 230 Volts complete all as specified and directed.

S&FSwitch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 Volts complete all as specified and directed.

S&F for powder coated sheet metal encloser deep drawn DB with plug and socket including installed nutral link adjustable din rail and connecting links one MCB single pole 20 Amps complete including taking down existing unservicable DBs/Plugs all as specified and directed.

S&F for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F electronic fan regulator step 5, 250V flush type on the exiting phenolic laminated sheet complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings complete all as specified and directed.

S&F LED bulb 7 watt Lamp complete all as directed (Make : Philips/Bajaj/Wipro/Crompton/Havells).

S&F new generation energy saving, wall mounted LED Tube light batten fittings, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 10 Watt LED 6K (2 ft long ) with LED tube rod 10 watt, 230 Volts 50 Hz.

S&F new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6K (4' ft long ) with LED tube rod 20 watt, 230 Volts 50 Hz.

S&F LED bulk head luminaries IP65 with opal diffuser 10 watt, 230 Volts complete all as directed.

S&F 25W LED light fixtting for bldg security with Aluminum body with PC cover, with LED life should be more than 50000 hrs, THD<10%, PF>0.95, system lumens > 4500 Lumens with all accessories internaly pre wired and including connecting up with twin core flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells Cat No : ENDURAPEARLNEOSL45WL ED 757SASYTOPC or equivalent in Bajaj/Philips/Wipro/Crompton.

S&F and fabrication bracket made out of GI tubing 20 mm dia, light grade upto 1.2 mtr length, bend to shape suitable for bldg security light fitting with necessary MS clamps, nut, bolt, washers etc and including taking out unserviceable bracket and removing from site of work complete all as specified and as directed.

S&F 36Watt LED fixture recess type 2 feet x 2 feet made up of CRCA housing with system lumens more than 4300, THD<10% PF>0.95 LED life more than 50000 hrs. with all accessories internaly pre wired and including connecting up with twin core flexible copper conductor cable with suitable size complete all as specified and directed. Make:- Havels Cat Part No : PLANO2XXPLR36WLED857S of equivalent in Bajaj/Philips/Wipro/Crompton.

Supply and fixing LED tube rod polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube light base fluorescent t8-T12 luminarie, 18-20 watt LED wattage with colour temp of 5700K 1800 lumens and with surge arrestor complete in all respect suitable for installation in existing T8 tube light with G13 lamp holder to give glare free light (make : Havells/Bajaj/Philips/Wipro/Crompton).

S&F sheet metal enclosure MCB SPN distribution board, 8 way, Double door with IP-43 protection single phase 240 Volts, including suitable size copper bus bar and neutral link, fixed flush in wall including taking out old DB's and cutting chases to wall as per site requirement for fixing DB and making good disturbed wall/surfaces to match with existing specification.

All as per item No. 30 above but MCB SPN DB 4 way complete.

Supply and fix in MCB TPN 'D' series, 415 Volts, 50Hz, 63 Amps, suitable for high inrush current loads complete all as directed incl taking out old unsv complete.

All as per item No. 32 here-in-before but with 'C' series MCB SPN 6 to 32 Amps 240 volts, 50Hz.

All as per item No. 32 here-in-before but with 'C' series MCB SP, 6 to 32 Amps 240 volts, 50Hz.

S&F Switch disconnector fuse unit Triple Pole with Neutral link 415 Volts AC, 50 Hz, with HRC Fuse set of three suitable for interior mounting in sheet metal enclosure of capacity 63 Amps including taking down existing unservicable switch fuse unit of any type and size all as specified and directed.

All as per item No. 35 above but capacity 100 Amps.

S&F PVC insulated multistranded aluminium conductor twin core of size 10 sq mm, 1100 Volts grade heavy duty service cable, served with inner sheathing of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more that 1 meter apart including 4 Sq mm dia GI suspension wire, all as specified and directed.

Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 2.5 meters length, burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge not less than 1.25 meter below ground level, connected to galvanised iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 03 of SSR Part-I 1991 connected to earthing main DB's/ Panels all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1 : 3 : 6) type C1 and CI pit cover with frame duly grouted in the PCC chamber. Charcol, salt including provision of earth lead protected by 15mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. Note :- (i) Item of earthing includes cost of 15mm bore medium grade GI protection Pipe. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done for obtaining desired results.

Supply and fixing of PVC gang box incl switch socket combined 6 Amps incl taking out old unsv complete all as directed.

Supply and fixing of PVC gang box incl switch socket combined 16 Amps incl taking out old unsv complete all as directed.

M&L for flame proof point wiring on wall surface wiring on ceiling with necessary fixing arrangements for one light point controlled by one switch with stranded PVC, FRLS insulated and unsheathed copper multistranded conductor of size 2.5 sqmm, 1100 volts grade drawn in and including 14 gauge ERW rigid steel conduit (metallic) not less than 20 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc., including PVC-FRLS insulated and unsheathed copper stranded conductor of size 2.5 sqmm, 1100 volts grade for continuous earthing making good the distrubed surface either by means of plaster of paris/ putti or distemper/ colour wash with same existing colour surfaces complete including taking down existing unserviceable light point wiring, fitting and fixtures all as specified and directed. Note :- (i) Flame proof junction box shall be measured and paid under relavent item. (ii) Earth wire shall be of green colour. (iii) Colour code should be maintined.

All as per item No. 41 here in before but for fan point wiring complete.

All as per item No. 41 here in before but two light point controlled by one flame proof switch.

All as per item No. 41 here in before but power point wiring using 4 sqmm copper conductor cable and 4.0 sqmm as earth wire.

M&L for sub main wiring with two single core 4 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable, including ERW rigid metallic steel conduit medium grade, ISI marked, 19/20 mm dia for sub main wiring including 4.0 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in surface/ recess with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable sub main wiring all as specified and directed. Note :- (i) Three runs of 4 sqmm copper conductor cable, and one run of ERW rigid metallic conduit will be measured as one unit. (ii) Junction boxes, bends, tees, elbows will be measured and paid under relevant items

S&F flame proof junction box with spigotted cover in LM-6, three way/terminal block 4 way strip type cable entry, 20 mm dia hole aluminium constructed, internal dimension 80 mm dia and 40 mm depth, duly approved by CMRI Dhanbad complete including taking down existing unserviceable junction boxes of any type and size all as specified and directed. Make :- Sudhir cat part No. JB/OOA/105-3 or equivalent in Balinga or Flexpro/Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof bend any radius of CI/MS with brass nickle threaded of size 20mm complete including taking down existing unserviceable flame proof bend of any type and size all as specified and directed incl taking out old unsv complete. Make:- M/S Sudhire switch Pvt. Ltd. Cat. No. BN/C/165 or Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof union brass of size 20 mm complete including taking down existing unserviceable flame proof union brass of any type and size all as specified and directed incl taking out old unsv complete. Make:- M/S Sudhire switch Pvt. Ltd. Cat. No. ACC/2C/2019 or Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof plug brass of size 20 mm complete including taking down existing unserviceable flame proof plug brass of any type and size all as specified and directed incl taking out old unsv complete Make :- M/S Sudhire switch Pvt. Ltd. Cat. No. ACC/2C/2019 or Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof flexible metalic hose conduit of size 3/4" dia and 300 mm long suitable for explosive atmosphere with explosive dustproof complete including taking down existing unserviceable metallic hose conduit of any type and size all as specified and directed. Make:- Shdhir cat part No. FH/199 or equivalent in Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof rotary switch in ML6, 16 amps, single pole, 250 volts and enclosed cast aluminium body with threaded cover with switch operated by a sigle pole knob with double entries suitable for 20 mm dia ERW threaded steel conduit duly approved by CMRI dhanbad and as manufacturers intructions including taking down existing unserviceable rotary switches of any type and size all as specified and directed. Make:- Sudhir cat part No. SS/OA/1010 or equivalent in Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof switch socket outlet with plug combination in LM-6, 16 Amps, 250 Volts, two pin and earth with no spare plug complete all as per manufacturer's instruction complete including taking down existing unserviceable switch sockets of any type and size all as specified and directed. Make :- Sudhir cat part No. SS/OA/1010-3 or equivalent Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof LED light fitting 2X28 Watts, epoxy finish LM6 aluminium housing with heat resistant tubular glass cover held in two aluminium cups, with built-in control gear accessories, prewired including complete including taking down existing unserviceable light fittings all as specified and directed. Make:- Sudhir cat part No. 1272 or equivalent Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof Bulk head flat type glass fittings, 60 Watts LED ceiling/wall mounted complete including taking down existing unserviceable bulk head fittings of any type and size all as specified and directed. Make:- Cat No: 1273 of make Sudhir or equivalent Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F flame proof bulk head metal hlide light fitting 1 x 70 watt, FLP-WP including lamp built in control gear box made of aluminium alloy LM-6 with all accessories, electronic ballast, bipin holders, etc complete with all accessories, internally pre-wired and including connecting up with three core PVC insulated ovrall sheathed flexible multistranded copper conductor, 1100 volts grade cable of suitable size from ceiling rose to connector of fitting complete all as specified and directed incl taking down old unsv complete Make:- Cat Pt No: BH//2C/218 of Sudhir or equivalent Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

M&L for stack clamps made out of 25 X 6 mm flat iron and nuts and bolts duly grouted on wall for fitting and including one coat of synthetic enamel paint of approved colour over one coat of red oxide primer complete including taking down existing unserviceable stack clamps of any type and size all as specified and directed.

M&L for rewinding of burnt out copper winding of flame proof ceiling fans of any make, size 1200 mm/1400mm sweep, rewinding with super enamelled copper wire of approved quality of existing gauge and size including necessary insulation with leathoroid sheet varnishing of winding of coil, packing, proper insulation, gasket etc including cleaning the rotor & the stator, overhauling, lubricating with fresh graese, etc and re-hanging the same and testing and commissioning, including taking out old unsv complete all as specified and directed by Engineer-in-Charge.

All as per item No. 57 here in before but flame proof Exhaust fan of any size.

S&F flame proof ceiling fan regulator etc. including taking down existing unserviceable ceiling fan regulator of any type and size all as specified and directed. Make:- Sudhir cat No RI/OA/1010 or equivalent Crompton/SCG/Bajaj/Shyam Switch Gear Pvt Ltd/Atlas Industris Ltd/Pluto.

S&F fix flame proof cast iron enclosure distribution board 415 volts, 4 way, TPN with ELCB and MCB suitable for explosive atmosphere with explosive including necessary panel board for required connection from busbar to different outgoing and including making good to the disturbed surfaces of walls, floors etc complete all as approved by CMRI Dhanbad with following incoming and outgoing controls including taking down existing unserviceable MCBs of any type and size all as specified and directed :- (i) Incoming :- ELCB 4 pole, 415 volts, 63 Amps - 01 No. (ii) Outgoing :- MCB 16 amps - 8 Nos.

S&F flame proof cast iron enclosure Main Switch Rotary Type 63 Amp 4 Pole, 415 Volt with all fixing arrangement and making good to the disturbed surfaces of walls, floors etc complete including taking down existing unserviceable main switches of any type and size all as specified and directed.

M&L for Earthing connected with Bldg main DB with galvanised iron earth plate of size 600 x 600 x 6 mm thick burried directly in ground not less than 2.5 mtr below grond level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm connected by GI earth wire of size 4 mm dia fitted with by nuts & bolts to earth plate. GI earth will be protected by using 15mm bore GI pipe (light grade) earth plate to as per reqmt at site with proper fixing including bolts, nuts & washers complete. The earthing includes necessary excavation, PCC pit, CI cover with frame duly groted with PCC, watering pipe 20 mm bore, funnel with wire mess etc. all as specified and shown in electrical plate No. 3 of SSR Part - I. Note: The unit rate shall also including earth work in any type of soil, PCC 1:3:6, type C1 for chamber, CI cover with frame duly groted with PCC with locking system, funnel with GI watering pipe 20mm dia light grade, GI protection pipe light grade 40mm dia and wire mesh complete as directed by Engr-in-Charge.

M&L for Earthing connected with Bldg main Lightining arrestor etc. with galvanised iron earth plate of size 600 x 600 x 6 mm thick burried directly in ground not less than 2.5 mtr below grond level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm connected by GI earth strip of size 32 x 6 mm thick soldered and revetted to earth plate attesters. GI earth strip will be protected by using 50mm bore GI pipe (light grade) earth plate to the including flat iron clamp 25 x 3 mm including bolts, nuts & washers complete. The earthing includes necessary excavation, PCC pit, CI cover with frame duly groted with PCC, watering pipe 20 mm bore, funnel with wire mess etc. all as specified and shown in electrical plate No. 3 of SSR Part - I. Note: The unit rate shall also including earth work in any type of soil, PCC 1:3:6, type C1 for chamber, CI cover with frame duly groted with PCC with locking system, funnel with GI watering pipe 20mm dia light grade, GI protection pipe light grade 40mm dia and wire mesh complete as directed by Engr-in-Charge.

M&L for Air termination single pointed aluminium rod 12mm dia, 300mm long fixed on GI Pipe complete including taking down unserviceable air termination point all as specified & directed.

M&L GI Pipe 50mm dia medium grade for air termination rod fixing, including fitting supported with GI Flange 50 mm bore, incl taking down unserviceable GI pipe all as specified & directed. Note : GI Flange will be measured and paid seperately under relevent item.

M&L for GI flange of size 50 mm dia to fixing with GI pipe by means of welded/threaded as per site reqmt complete all as directed.

M&L for GI reducer of size 50x12 mm dia medium grade with threaded type suitable to fit air termination complete all as directed.

M&L for cement concrete on roof of type B1 1:2:4 20 mm graded stone aggregate for foundation of GI pipe fo lightning protection /as per existing at site all specified and directed.

Taking down and refixing the old hanging/removed Aluminium/GI strip any size on roof/wall incl replacement of 'T' type insulators complete all as directed by Engr-in-Charge. Note : 'T' type porcelain insulators shall be measured and paid separately under relvent item.

S&F 'T' type heavy duty insulators made of DMC material suitable for supporting 25 x 3 mm / 32 x 6 mm strip on roof or as down conductor on wall/surface including all fixing accessories required complete all as specified and directed.

S&F aluminium strip 25X3.15mm with saddler and drilled holes, nut bolt washers and fixing srewed on wall/ roof etc for roof conductor down conductors on roof/wall run on porcelain insulators between suitable distance including taking down unserviceable aluminum strip all as specified & directed. Note :- Necessary nut, bolt and washer for fixing alongwith drilled holes are included in coated rate.

M&L for GI strip 32x6mm burried in ground/fixing on wall/floors complete with drilled hole alongwith necessary nut, bolt and whasher including taking down unsereviceable G I strip all as specified and directed. Note :- Necessary nut, bolt and washer for fixing alongwith drilled holes are included in coated rate.

M&L for test point terminal block made of gunmetal or phasphorus bronze of size 75x75x25mm drilled and srewed including 03 Nos 8mm dia 25mm long hexagonal head screwed including taking down unserviceable terminal block all as specified and directed.

Taking down ceiling fans/ exhaust fan / wall bracket fan of any sweep and make from any position carefully including disconnection of electric supply and disconnection of blades from fan and deposit in MES store for carrying out necessary repair/rewinding i.e overhauling, painting etc complete all as specified and directed.

Removing the burnt out copper winding of ceiling fans of any make, size 1200 mm sweep and rewinding with super enamelled copper wire of approved quality of existing gauge and size including necessary insulation with leathoroid sheet varnishing of winding of coil, packing, proper insulation, gasket etc., including cleaning the rotor and the stator, overhauling, lubricating with fresh graese, assembling including rehanging in position, testing and commissioning complete all as specified and directed.

All as per Sl. item No. 75 here in above but size 1400 mm sweep.

All as per Sl. item No. 75 here in above but for exhaust fan of size 300 mm sweep.

All as per Sl. item No. 75 here in above but for size 450 mm sweep.

All as per Sl. item No. 75 here in above but wall bracket fan of any sweep.

Opening up ceiling fan of any make and any sweep for overhauling such as cleaning the rotor and the stator, overhauling, lubricating with fresh oil/ graese, reassembling for proper running including rehanging in position and connecting up, testing and commissioning complete all as specified and directed. Note : Any unserviceable/burnout parts replaced shall be measured and paid separately under relavent items. However quoted rates shall be deemed to be included for rectification of any defect in the fan.

Supply & Fix capacitor 2.5/3.15 mfd, 230 volts for ceiling fans 1200/1400 mm sweep and any make complete all as directed.

Supply & fix capacitor 4 mfd suitable for exhaust fans 300/450 mm sweep complete all as directed.

Supply & fix ball bearing suitable for ceiling fan sweep 1200 mm complete all as directed.

Supply & fix ball bearing suitable for ceiling fan sweep 1400 mm complete all as directed.

Supply and fix split pin suitable for ceiling fan/exhaust fan of any sweep and make complete all as directed.

Supply & fix hanging clamp with thrust rubber bush suitable for ceiling fan of any make and size.

Supply & fix self lubricating bush of gun metal as per ceiling fan/exhaust fan complete all as directed.

Supply & fix shaft of approved quality for ceiling fan/exhaust fan any make, type and size complete all as directed.

Supply and fix isolating gear suitable for bracket fan of any type and size complete all aspecified and directed.

Material and labour for preparing the surface of body/blades of ceiling fan, any sweep and make, applying one coat of spray paint with synthetic encamel white paint and writing the MES No. maker's serial No. etc with sythentic enamel black paint 1.5cm high letters complete all as directed.

Supply and fix PVC insulated, unsheathed three core copper flexible cable of size 1.5 sqmm including connection complete all as directed.

Supply and fix stop valve / angle valve cast copper alloy, screwed down, high pressure with ctutch or butterfly handles, screwed both ends for iron pipe 15mm dia complete all as specified and directed.

Supply and fix bib tap cast copper alloy, screwed down, high pressure with ctutch for iron pipe 15mm dia complete all as specified and directed.

Material and labour for repairing of split/window air conditioner, water cooler, refregerator, arresting the leackage with nitrogen gas with adequet pressure replacing the deffective parts like, blower motor, copper tubing, condenser motor, thermostate, over load relay, condenser, starting relay, filling the refrigerent gas after vaccuming etc. and making the appliances serviceable complete all as per specified and directed. Note :- (i) Nitrogen gas for testing of leackage will be supplied by the contractor and rate for the same shall be deemed to be included in unit rate quoted. (ii) Blower motor, copper tubing, condenser motor, thermostate, over load relay, condenser, starting relay, filling the refrigerent gas shall be measured and paid under relavent items.

Supply & jointing with copper welding 1/4" copper tubing for AC, water cooler and refrigerator complete all as directed.

Supply & jointing with copper welding 1/8" copper tubing for AC water cooler and refrigerator complete all as directed.

Supply and fix 60-80 MFD starting capacitor complete all as directed.

All as per Sl. item No. 97 here in before but 80 -100 MFD.

All as per Sl. item No. 97 here in before but 100 -120 MFD.

Supply and fix 36 MFD running capacitors complete all as directed.

All as per Sl. item No. 100 here in before but 25 MFD.

All as per Sl. item No. 100 here in before but 16 MFD.

All as per Sl. item No. 100 here in before but 8 MFD.

Supply and fix over load protector as per existing make, sizes, model and capacity suitable for existing compressor of water cooler, refrigerator, air conditioner etc complete all as directed.

Supply and fix thermostate switch with knob for window type air conditioner existing make complete all as directed.

All as per Sl. item No. 105 here in above but for water cooler and refrigerator.

Supply and fix push type tap 15mm bore, brass chromium plated for water cooler complete all as directed.

Supply and fix blower motor, 230 volts, single phase, 50Hz suitable for AC, water cooler of 1/4 HP capacity complete all as specified and directed.

All as per Sl. item No. 108 here in above but 1/6 HP capacity.

Supply and fix starting relays as per existing sizes/ model suitable for existing compressor of water cooler, air conditioner etc., complete all as directed.

Supply and charging of refrigrent R-22 gas for water cooler, AC, and refrigerator up to desired pressure complete all as directed.

Supply and charging of Refrigerent R-134a gas for water cooler, AC, and refrigerator up to desired pressure complete all as directed. Note for Sl. item Nos. 110 and 111:- Refrigerent gas shall be supllied in sealed container only.

Supply and fix box/pin type relay for compressor protection of refrigerator as per existing, including testing complete all as directed.

Taking down window/split type AC from existing bracket/support for cleaning internally oiling, greasing of blower motor/ fan including painting the chasis/bracket, wrtting MES No. etc., and refixing in position complete all as directed.

Supply and install capacitor, metalized poly propylene heavy duty (MPP-H) three phase, 415 volts and 50 Hz system for permissible non-linear load 15 % of 5 KVAR capacity complete all as directed.

Material and labour for comprehensive maintenance of storage type geyser 25/50 litrs cpacity of any make and any description and carrying out the work such as cleaning of inlet and outlet water tubing, inner tank, geyser assembly, heating element and pipes including checking of electric connection and proper earthing to geyser, refixing after repair/ replacement of worn out nuts, bolts and washers etc., complete all as directed. Note : Spare parts of the geyser if any replaced shall be measered any paid under relavant item.

Supply & fid heating element round, push type, single phase, 1.5 KW complete all as directed.

Supply & fix heating element traingle type, single phase, 1.5 KW complete all as directed.

Supply & fix themostate 9"/12" required for any type of geyser capacity 25/50 litrs with temperature adjustable knob and range of temparetur 0-80 degree celceius complete all as directed.

Supply & fix geyser assembly for any type of geyser of capacity 25/50 litrs with rubber gasket, nuts, bolts and washers complete all as directed.

Supply & fix indicating lamp with holder of required colour for any type of geyser of capacity 25/50 litrs with rubber gasket, nuts bolts and washers complete all as directed.

Supply and fix PVC connection of 15mm size, spirally reinforced with stainless steel wire inside the pipe for outlet hot water pipe connection with brass nuts at both ends of length 450 mm complete all as directeed.

Supply and fix PVC connection of 15mm size, spirally reinforced with thread inside the pipe for inlet of water connection with brass nuts at both ends of length 450 mm complete all as directeed.

M&L Scrapping the old painted surfaces of geyser, cleaning and painting with two coats of white synthetic enamel paint over & including a coat of red oxide primer including writing MES No. with black paint with minimum 25 mm size of letters all as directed at site for 25 liters capacity geysers complete.

Supply & fixing in replacement water storage inner tank of metal alloy copper 23 gauge for 25 ltrs capacity geyser, with provn for fixing 15mm dia galvanized air release valve all as specified and directed.

Supply & fixing in replacement water storage inner tank of metal alloy copper 23 gauge for 50 ltrs capacity geyser, with provn for fixing 15mm dia galvanized air release valve all as specified and directed.

Supply and Fixing Glass wool suitable for water storage geyser of any cap all as specified and directed.

Servicing the unserviceable solar water heating system and making, cleaning the solar touch end glass, stopping the leackage with replacing the old unserviceable CPVC pipe/tee/bend/broken glass tubes etc. complete all as specified and directed. Note: CPVC pipe /glass tubes,CPVC acessories will be measured and paid saperately in respective item.

Supply and fixing in repair 20 mm external dia Chlorinated Poly Vinyl Chloride (CPVC) pipe consisting of high grade polymer effectively bonded in the inside and outside of an aluminium tube CPVC-AL-CPVC by melt adhesive(including joining/fixing with cement solvent) suitable for hot water supply from solar water heater to the bathrooms and fixed to wall, ceiling etc. including all materials, fittings and fixing works and testing of pipe line test for solvent cement joints and adhesive joints and testing of all materials shall be as per manufactures instructions, literature and confirming to IS-15450 : 2004 or ASTM -1282 including making good the disturbed surfaces complete all as specified and directed.

S & F in repair 100 LPD Tata BP make Puf insulated hot water storage tank for 100 LPD solar water heater storage tank material 316 grade stanless steel outer clading material powdar coated GI sheet. complete all as specified and directed.

S&F in repair anti rust ring for 1500 x 47 mm size special grade borocilicate glass tube (pack of 20 pieces each) complete all as specified and directed.

S&F in repair silicon ring for 1500 x 47 mm size Tata BP special grade borocilicate glass tube (pack of 20 pieces each) complete all as specified and directed.

S&F in repair plastic tube holder for 1500 x 47 mm size Tata BP special grade borocilicate glass tube (pack of 20 pieces each) complete all as specified and directed.

S&F in repair brass elbo suitable for CPVC pipe line of size 20 mm complete jointing etc all as specified and directed.

S&F in repair brass Tee suitable for CPVC pipe line of size 20 mm complete jointing etc all as specified and directed.

S&F in repair Female brass threaded adopter suitable for CPVC pipe line of size 20mm complete jointing etc all as specified and directed.

M&L for repairing of RO based aqua guard installed for water cooler , with replacement of candle, checking of AC supply circuitary of aqua guard and made functional, replacement of step down transformer 230 volt to 12/24 volts, as per sample, incl servicig of RO complete all as directed at site. Note: spareparts will be measured and paid seperately under relevent items.

S&F in repair /Replacement of Membrane of RO plant machine capacity 50 Ltr/Hrs.

S&F in repair /Replacement of Pree filter candle RO plant machine capacity 50 Ltr/Hrs, Activated carbon granuals twice and carbon black all as directed.

S&F in repair /Replacement of Diaphragm Pump 24 volt DC and open flow minimum 2.0 Ltr/min as per site requirement before all as directed.

S&F in replacement of worn out/exhausted parts during the servicing such as Step down transformer and PCB with parts and all electrical parts / PVC pipes small pices for inlet and outlet connection of unit as per site requirement all as directed.

M&L for repair of voltage stabilzer of cap 0.5 KVA to 1 KVA by replaceing of cut out, burnt out transformer, indicatros, volt meter & Amp meter etc all as specified and as directed.

M&L for repair of voltage stabilzer of cap 2 KVA by replaceing of cut out, burnt out transformer, indicatros, volt meter & Amp meter etc all as specified and as directed.

M&L for repair of voltage stabilzer of cap 4/5 KVA by replaceing of cut out, burnt out transformer, indicatros, volt meter & Amp meter etc all as specified and as directed.

Dashmesh Enterprises

TANUJ CONST. CO.

pyarelal galar

Veer Brothers