Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95.8 CrAdmitted-Finance | ₹95.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹97.0 CrAdmitted-Finance | ₹97.0 Cr | L2 | Admitted-Finance |
| 3 | L3₹99.9 CrAdmitted-Finance | ₹99.9 Cr | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | NORDEN DORJEE SANGDERPA L3 | Kailash Agarwal L1 | Sushil Kumar Goyal L2 |
|---|---|---|---|---|---|---|
| 1.0011 KV Feeder Replacement with DOG Conductor | ||||||
| 2.00 | 11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR DOG Conductor including all nuts & bolts complete without arms. | 675 | Nos. | 52,966 ₹3.6 Cr | 53,027 ₹3.6 Cr | 53,000 ₹3.6 Cr |
| 3.00 | 11 kV Disc Insulator 70 KN, B&S / TC Type | 3,150 | Nos. | 1,582.5 ₹49.8 L | 1,608 ₹50.7 L | 1,585 ₹49.9 L |
| 4.00 | Hardware Fittings for disc insulator suitable for DOG conductor | 3,150 | Set | 361.5 ₹11.4 L | 366 ₹11.5 L | 375 ₹11.8 L |
| 5.00 | 11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent ) | 1,350 | Set | 486 ₹6.6 L | 493 ₹6.7 L | 490 ₹6.6 L |
| 6.00 | DOG Conductor 100 sqm, 6/4.72+7/1.57 | 695.25 | KM | 1,65,788 ₹11.5 Cr | 1,66,250 ₹11.6 Cr | 1,65,800 ₹11.5 Cr |
| 7.00 | G.I. Wire 4 mm (8-SWG) for Continuous Earth | 5,625 | KG | 94.5 ₹5.3 L | 94.5 ₹5.3 L | 95 ₹5.3 L |
| 8.00 | PG Clamp for Dog Conductor | 1,350 | Nos. | 147 ₹2.0 L | 145 ₹2.0 L | 150 ₹2.0 L |
| 9.00 | Compression Joint for ACSR Dog conductor | 1,350 | Nos. | 147 ₹2.0 L | 145 ₹2.0 L | 150 ₹2.0 L |
| 10.00 | Back clamps of 75x8mm M.S. flat for holding channel. | 675 | Nos. | 208.5 ₹1.4 L | 207.4 ₹1.4 L | 210 ₹1.4 L |
Tender Value
₹25.0 Cr
EMD Value
₹62.4 L
Closing Date
28 Jun 2023, 4:00 pmClosed
Chief Engineer cum Nodal Officer (RDSS)
Conference Hall, Top Floor, Kazi Road, Power Deptt
REPLACEMENT/ AUGMENTATION OF OLD/FRAYED CONDCUTOR OF 11 KV, REPLACEMENT OF OLD/FRAYED LT CONDUCTOR (LT BARE TO LT BARE AND LT BARE TO LT AB CABLE) AND CAPACITOR BANKS UNDER REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME
2023_EPDsi_666_1
86/RDSS/WORK/POWER/GOS/ACE-II
Open Tender
Electrical Works
730 days
Namchi, Pakyong, Soreng and Mangan Districts
REPLACEMENT/ AUGMENTATION OF OLD/FRAYED CONDCUTOR OF 11 KV, REPLACEMENT OF OLD/FRAYED LT CONDUCTOR (LT BARE TO LT BARE AND LT BARE TO LT AB CABLE) AND CAPACITOR BANKS UNDER REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME
7 documents required · 7 mandatory
₹2 L
PCE cum Secretary Power Deptt Sikkim
₹62.4 L
1 Sept 2023
2 Jun 2023
29 Jun 2023
2 Jun 2023
28 Jun 2023
2 Jun 2023
Amount
11 KV Feeder Replacement with DOG Conductor
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR DOG Conductor including all nuts & bolts complete without arms.
11 kV Disc Insulator 70 KN, B&S / TC Type
Hardware Fittings for disc insulator suitable for DOG conductor
11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
DOG Conductor 100 sqm, 6/4.72+7/1.57
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for Dog Conductor
Compression Joint for ACSR Dog conductor
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
11 KV Feeder Replacement with RABBIT Conductor
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR Rabbit Conductor including all nuts & bolts complete without arms.
11 kV Disc Insulator 70 KN, B&S / TC Type
Hardware Fittings for disc insulator suitable for Rabbit conductor
11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
Rabbit Conductor 50 sqm
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for Rabbit Conductor
Compression Joint for ACSR Rabbit conductor
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
LT BARE TO LT ABC(3X95+1X50+1X16)SQMM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 95 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT BARE TO LT ABC(3X70+1X50+1X16)SQMM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 70 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT BARE TO LT ABC(3X50+1X35+1X16)SQMM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 50 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
CAPACITOR BANK
12.65 kV, 2000 KVAr, 3-Phase, 50 Hz, Outdoor Type, Capacitor bank having step as 900 Kvar + 900 Kvar + 200 Kvar at 12.65 KV. Bank shall be complete with Capacitor control panel of 100/200/400 kVAr at 7.3 KV, including Capacitors, Reactors, Vacuum Capacitor Switches allied material such as suitable size of Aluminium busbars, Pin/Post insulators, Expulsion fuses, 3-Phase Oil-Cooled RVT,L.A,Isolator & Structure for complete Equipment etc.
Description of Work / Item(s)
Amount
11 KV Feeder Replacement with DOG Conductor
Equipment
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR DOG Conductor including all nuts & bolts complete without arms.
11 kV Disc Insulator 70 KN, B&S / TC Type
Hardware Fittings for disc insulator suitable for DOG conductor
11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
DOG Conductor 100 sqm, 6/4.72+7/1.57
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for Dog Conductor
Compression Joint for ACSR Dog conductor
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
Associated Civil Works
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
11 KV Feeder Replacement with RABBIT Conductor
Equipment
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for ACSR Rabbit Conductor including all nuts & bolts complete without arms.
11 kV Disc Insulator 70 KN, B&S / TC Type
Hardware Fittings for disc insulator suitable for Rabbit conductor
11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
Rabbit Conductor 50 sqm
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for Rabbit Conductor
Compression Joint for ACSR Rabbit conductor
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
Associated Civil Works
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
LT BARE TO LT ABC(3X95+1X50+1X16)SQMM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 70 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT BARE TO LT ABC(3X70+1X50+1X16)SQMM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 70 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT BARE TO LT ABC(3X50+1X35+1X16)SQMM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 50 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
CAPACITOR BANK
Equipment
12.65 kV, 2000 KVAr, 3-Phase, 50 Hz, Outdoor Type, Capacitor bank having step as 900 Kvar + 900 Kvar + 200 Kvar at 12.65 KV. Bank shall be complete with Capacitor control panel of 100/200/400 kVAr at 7.3 KV, including Capacitors, Reactors, Vacuum Capacitor Switches allied material such as suitable size of Aluminium busbars, Pin/Post insulators, Expulsion fuses, 3-Phase Oil-Cooled RVT,L.A,Isolator & Structure for complete Equipment etc.
Description of Work / Item(s)
Development of Distribution Infrastructure
Sushil Kumar Goyal
NORDEN DORJEE SANGDERPA
Sushil Kumar Goyal
NORDEN DORJEE SANGDERPA
Sushil Kumar Goyal
NORDEN DORJEE SANGDERPA
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid