C/o R.C.C.Dam ( PWS ) at Rehad nallah

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.50 m, as directed by Engineer-in-charge (All kind of soil / Ordinary rock)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan) including dressingof sides and ramming of bottoms, lift upto 1.50 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by Engineer-in-charge (Ordinary rock)

Dry stone soiling / pitching 15 cm thick including supply of stones and preparing surface complete carriage of material in all lead and lifts

P/L cement Concrete 1:4:8 (1 cement:4 Sand:8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth carriage of material in all lead and lifts.

P/L cement Concrete 1:3:6 (1 cement :3 Sand :6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth carriage of material in all lead and lifts.

Providing and laying in position specified grade of reinforced cement Concrete work 1:2.4( 1 : cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth carriage of material in all lead and lifts.

Providing steel reinforcement for RCC work including straightening , cutting , bending, placing in position and binding all complete upto plinth & above level carriage of material in all lead and lifts. Mild / Tor steel I S I and Medium Tensile steel bars (TMT)

P/L cement Concrete 1:5:10 (1 cement:5 Sand:10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth carriage of material in all lead and lifts.

P/F work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including sentring, shuttering , strutting and propping etc. with wooden battens and ballis, height of propping and sentring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concret and plain concret work in: vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string cources and the like

Supplying , filling , levelling gravels, for filter boulder , sand , stone aggregate in required thickness, for all lead and lifts complete as per direction of engineer-in charge carriage of material in all lead and lifts.

Smooth finishing of the exposed surface of RCC work with 6 mm thick cement mortar 1:3 (1cement :3 sand ) carriage of material in all lead and lifts.

Providing and fixing M.S. sheet 8 mm dia i/c handle, angle frame with paint in all respect complete

Providing and fixing of GI pipe ISI 50 mm dia ISI in all respect complete

P/F of MS wheel valve 50 mm dia ISI in all respect complete

Providing and fixing of sign board angle iron frames, welded M.S sheet, with painting and writting etc.in all respect complete.carriage of material in all lead and lifts.

Varun Rohal

Subhash Sharma