Construction of Field Functionaries Training Institute / Kissan Ghar At Govt. Grape Farm Maralia, R.S. Pura. By way of construction of Water Tank, Septic Tank, Soak Pit and False Ceiling, Development of outer area and electrification etc

Amount

Earth work in bulk excavation by manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. In all kind of soils.

Extra for every additional lift of 1.5 m or part thereof inexcavation/banking excavated or stacked material All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring andshuttering. All work upto plinth level with: 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size

Providing and laying in position cement concrete of specifiedgrade including curing but excluding the cost of centring andshuttering. All work upto plinth level with: 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

S.Tank/Water Tank Bottom Slab

in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level) S.Tank/Water Tank Slab

in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars,piers, abutments, posts and strutsR.C.C Water Tank Walls

Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all completeupto plinth leve

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete Edge Wall

Retaining walls, return walls, walls (any thickness). Water Tank Walls

Suspended floors, roofs, landings, balconies and access platforms. S.Tank/Water Tank Slab

Edges of slabs and breaks in floors and wall under 20cm wide.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing cement : 6 coarse sand) S.Tank Walls 1st Step

Honey-comb brick work 10/11.4 cm thick with common burnt clay (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand) including curing complete.

Half brick masonry with common burnt clay (non-modular)10. bricks of class designation 7.5 in foundations and plinthincluding curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick 11. wall of mix 1 : 4 ( 1 cement : 4 fine sand

12mm Cement plaster on the rough side of single or half brick12 wall /conct. wall of mix 1 : 4 ( 1 cement : 4fine sand

Supply of brick aggregate 40mm nominal size including filling complete job

Soak Pit

Labour For filling brick bats hand packed

Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the jointswith sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. Outer Area

Providing & fixing Man hole cover with ring heavy qlty. complete. job

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: ( Parkash Surya/Jindal make)

15 mm dia. nominal bore

20 mm dia. nominal bor

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore( Parkash Surya/Jindal make) Main Water supply line from source

Providing & fixing PVC pipes of approved make ISI certified including fittings all bend/collor/offset etc.whatever requiredas per necessity of site complete job. (Astral/Finolex/Vectus) make

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel ections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from .30mm thick(minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum)sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be nterlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main “T” 12.0 (Roofing) 179 CODE NO. DESCRIPTION UNITRATE runners to be suspended from ceiling using GI slottedcleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rodswith galvanized butterfly level clips of size 85x30x0.8 mmspaced at 1200mm center to center along size 85x30x0.8 mmspaced at 1200mm center to center along main T, bottomexposed width of 24mm of all T-sections shall be pre-paintedwith polyester paint, all complete for all heights as perspecifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white colourtiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop;made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Disposal of mulba for avg 5.0 km by M T incl L/U complete

Carriage of bricks for avg 20km by MT

Carriage of materials by mt for avg distance of 10km

Bajree

Aggregate

Electrical Part

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for extra long light point/ circuit wiring/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface /Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.

Wiring for Light/ Power Plug with 2 x 2.5 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface /Recessed medium class PVC Conduit along with 1 No. 2.5 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 10 A modular socket outlet and 10 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 20 A modular socket outlet and 20 A modular switch, connections etc. as required.

Supplying and fixing of bakelit round sheet as required.

SITC of Ceiling Fan,Capacitor type suitable for low voltage operation including wiring the down rods of standard length(Upto 30 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required

Supplying and fixing two modular Stepped Type Electronic Fan Regulator 2M on the existing Modular Plate Switch Box including Connections but Excluding Modular Plate etc. as Required

Supply, installation, testing and commissioning of 75 mm Pipe Filled with Crystalline conductive Mixture with Al Strip of Size 40 mm x 6 mm of Length 2 mtr with Ecofriendly Backfill Compound 50 Kg. Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance value & Earth pit chamber (300mm x 300mm)

SITC of pre-wired Surface/Recessed Mounted LED Ceiling Light 12 W including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and earthing etc as required.(LD80-101-XXX-60-SM) WIPRO or eq. Make

SITC of pre-wired Surface/Recessed Mounted 2x2LED Ceiling Light Fitting including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and earthing etc as required

Supply ,Installation ,testing and commissioning of exhaust fan with louver in the existing opening, including making good the damage, connection etc. as required. 300 mm sweep

Supplying and fixing PVC batten/ angle holder/ Celling rose including connections etc. as required.

Supplying and fixing of LED Lamp 9 watt including connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Single pole and neutral

Triple pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and Laying of 1 No. PVC/XLPE insulated and PVC Sheathed /XLPE Power Cable of 1.1 KV Grade of Following Sizes in the existing RCC/Hume /DWC/Stone ware/Metal Pipe as Required.

cable 50 sq. mm

Measurable quantities may vary at the time of actual execution of the work and shall be allowed as per actual with in the cost.

ROMESH SINGH