Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.1 LAccepted-AOC | L1 | Accepted-AOC Bid found to be responsive | |
| 2 | L2₹24.6 L+₹2.5 L (11.1%)Rejected-AOC | L2 | Rejected-AOC Bid found to be responsive | |
| 3 | L3₹25.4 L+₹3.3 L (14.8%)Rejected-AOC | L3 | Rejected-AOC Bid found to be responsive |
Tender Value
₹22.2 L
EMD Value
₹44,328
Closing Date
25 Apr 2025, 2:00 pmClosed
CEO, GMDA
O/o of GMDA, Bhangagarh, Ghy-05
Development of Rotary near LGBI Airport, Guwahati
2025_GMDA_43989_1
GMDA/DEV/35/2025
Open Tender
Composite Works
Item Rate
60 days
VIP near Airport
Refer bid document
4 documents required · 4 mandatory
₹500
₹44,328
Yes
16 Jun 2025
4 Apr 2025
25 Apr 2025
4 Apr 2025
25 Apr 2025
8 Apr 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge,All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:. Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joint (Payment for grouting of joints to be made separately).Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.. 5/6 A switch.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.. 3 pin 5/6 A socket outlet
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Supplying , Installation ,Testing & Commisionning of Lynx Spyke Light of 10 Wattage & CCT of 3000K (CAT Ref. No-SLMLY010W)
Supplying , Installation ,Testing & Commisionning of Zenith Plus Flood Light of 50 Wattage & CCT of 5700 (CAT Ref. No-FWZP050C)
Fountain Pad, make in FRB A Class Complete Holder assembly with Water Fountain, 4 Layer Resin Coating with wax filler & Water Proofing Coated FRB
6’ FEET DIA Ring make in Jindal B Class grade Complete 2 PCS Holder assembly with Rubber coated paint. (CNC Cutting)
Crown Jet Nozzle for Ring With Ball Joint Make in Brass with shine chrome (CNC Cutting)
Centre Jet Nozzle With Ball Joint Make in Brass with shine chrome (CNC Cutting)
Color Changing LED Light 27 W (Powered By Edison) Rating:- IP68/CE/ROHS/CE, Model No :- BKWT-SS/9L/TRI
DCC Programmable Controller for Lights, Model- BKWT/PWN/DC, Rating:- IP-65/CE/ROHS
Open well submersible pump with dust grill 2HP, Make:- Compton/Kirloskar
Electrical panel, Starter overload relay with face and on/off indication, protection circuit. Assembled with L&T or TC. As Suitable for Pump Operational Systems as water,Rating – IP65/65 (With Smart Shock Protection Circuit)
Supplying and Fixing of PVC pipes (10 Kg/cm2) of make Prince/Supreme/Prakash or equivalent
Supplying and Laying submersible flat/round cables PVC insulated PVC 4core /3core/2core Wiring wire used multiband good PVC insulation Thickens of wire 1.5mm,2.5mm Jointing of wire PVC. Waterproof coating tape or chemical. Note:- All wires are in 100% copper.
Transportation
Design/ Supervision/ Installation/Commissioning/Labour/execution
VISION EVENTS & ENTERTAINMENT (BID ID -266713)
Sunil Kumar Verma (BID ID -266508)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .