GE 861 EWS-40 (T)/2025-26

Amount

BOQ/SCHEDULE 'A' FOR WOODEN FURNITURE

Repair to Chair Wooden Bottom with out Arms FD-285 Supply and fixing of front lags of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge

All as per item No 1.001 here-in-before but rear legs.

All as per item No 1.001 here-in-before but rails.

All as per item No 1.001 here-in-before but stiffeners.

All as per item No 1.001 here-in-before but back rest.

All as per item No 1.001 here-in-before but seat which shall be of ply wood commercial 5 No Ply 6 mm thick, ISI marked.

Repair to Chair Writing FD-280 Supply and fixing of front legs of Ist class sheesham wood including taking out of old unserviceable one, complete all as directed.

All as per item No 1.007 here-in-before but rear legs.

All as per item No 1.007 here-in-before but rails.

All as per item No 1.007 here-in-before but stiffeners.

All as per item No 1.007 here-in-before but arms.

All as per item No 1.007 here-in-before but back rest.

Repair to Chair Easy FD-229 Supply and fixing of front legs of Ist class sheesham wood including taking out of old unserviceable one, complete all as directed.

All as per item No 1.013 here-in-before but rear legs.

All as per item No 1.013 here-in-before but rails.

All as per item No 1.013 here-in-before but stiffeners.

All as per item No 1.013 here-in-before but arms.

Repair to Chair Dining FD-228 & 279 Supply and fixing of front legs of Ist class sheesham wood including taking out of old unserviceable one, complete all as directed.

All as per item No 1.018 here-in-before but rear legs.

All as per item No 1.018 here-in-before but rails.

All as per item No 1.018 here-in-before but stiffeners.

All as per item No 1.018 here-in-before but back rest.

Repair to Table 3'x2' with and without drawer FD-223 Removing unserviceable legs of table, supply and fixing new legs to the table all as shown on drg and as directed.

All as per item No 1.023 here-in-before but side rails.

All as per item No 1.023 here-in-before but front & back rails.

All as per item No 1.023 here-in-before but Top which shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed.

Repair to Table Peg FD-227 Removing unserviceable legs of table peg, supply and fixing new legs complete as per drg and as directed.

All as per item No 1.027 here-in-before but stiffeners.

All as per item No 1.027 here-in-before but Top which shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed.

Repair to Teapoy wooden FD-278 Removing unserviceable legs, supply and fixing new legs shall be made out of Ist class sheesham wood duly seasoned, complete as per drg and directed.

All as per item No 1.030 here-in-before but stiffeners.

All as per item No 1.030 here-in-before but Top which shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed.

Repair to Table office clerk wooden DB-4120 Removing unserviceable legs, supply and fixing new legs shall be made out of Ist class sheesham wood duly seasoned, complete as per drg and directed.

All as per item No 1.033 here-in-before but Top which shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed.

Repair to Table Writing FD-249 & 276 Removing unserviceable leg of table writing and supply and fixing new leg all shown on drg and directed.

All as per item No 1.035 here-in-before but side rails

All as per item No 1.035 here-in-before but stiffeners

All as per item No 1.035 here-in-before but Top of Table writing which shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Table Dining for 6 pers FD-273 Removing unserviceable legs of table dining 6 pers and supply and fixing new leg all shown on drg and directed.

All as per item No 1.039 here-in-before but side rails.

All as per item No 1.039 here-in-before but Top of Table dining for 6 pers shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Table Dining 8 pers FD-273 Removing unserviceable leg of table dining 8 pers and supply and fixing new leg all shown on drg and directed.

All as per item No 1.042 here-in-before but side rails.

All as per item No 1.042 here-in-before but Top of Table dining for 8 pers which shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

TABLE DRESSING LADIES WITH MIRROR:- FD-32, 251 S&F in replacement blind mirror of table dressing ladies with mirror, copper electroplated, 5.5 mm thick of size1120x365 mm all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.045 here-in-before but ply back of mirror 6 mm thick both side commercial faces ,ISI mark cut into shape as requires all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.045 here-in-before but Aluminium anodised drawer knob for table dressing ladies all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.045 here-in-before but broken glass shutter of table dressing ladies 5.5 mm thick cut into required size all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.045 here-in-before but aluminium channel for shutter of table dressing all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.045 here-in-before but Ist class hard wood (teak), broken legs of table dressing ladies W/M, duly finished to match with existing made out in shape all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.045 here-in-before but black / white colour PVC / rubber shoes for table dressing all as shown in drawing and as directed by Engineer-in-Charge.

TABLE DRESSING GENTS WITH MIRROR:- FD-31, 230 S&F in replacement blind mirror of table dressing gents with Mirror, copper electroplated, 5.5 mm thick cut into shape, size 760x380 mm all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.052 here-in-before but ply back of mirror of table dressing gents 6 mm thick both side commercial face fixed in frame all as directed by Engineer-in-Charge.

All as per item No 1.052 here-in-before but top of table dressing gents 18 /19 mm thick prelaminted particle board one side teak faced and others side white in colour bonded with phenol formaldehyde all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.052 here-in-before but Ist class hard wood (teak) side plank of drawer of table dressing gents fixed with screw/ nail as shown in drawing and directed by Engineer-in-Charge.

All as per item No 1.052 here-in-before but bottom ply of drawer 6 mm thick both side commercial, ISI mark all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.052 here-in-before but aluminium anodised powder coated knob of table dressing gents fixed with screw all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Table Dining OR FD-165 Removing old unserviceable top of table dining OR and supply and fixing new top made out of pre-laminated particle board 18 mm thick one side teak faced with 4 mm thick teakwood beading all around the top.

All as per item No 1.058 here-in-before but 25 mm MS Square tube not less than 1 mm thick

Repair to Table Centre FD-274 Removing unserviceable legs of table centre and Supply and fixing new Legs made out of Ist class hard wood sheesham duly seasoned as per drg.

All as per item No 1.060 here-in-before but Top of Table centre, made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

TABLE BED SIDE :- FD-28, 210, 212, 248, 276 S&F in replacement side plank (left or right) of table bed side 18/19 mm thick prelaminated particle board bonded with phenol formal dehyde exterior grade fixed with screw and fevicol all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.062 here-in-before but top of table bed side, 18/19 mm thick prelaminated particle board fixed with screw all as shown in drawing and as directed by Engineer-in-Charge

All as per item No 1.062 here-in-before but shelf of table bed side 18/19 mm thick prelaminated particle board complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.062 here-in-before but legs of table bed side 1st class hard wood (teak) duly finished to match with existing and made out in shape, fixed with screw all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Bed hard with Ply wood top/Bed Newar FD-246 & 247 Supply and fixing of long rails of Ist class sheesham wood as per drg including taking out of old unserviceable one, complete all as directed.

All as per item No 1.066 here-in-before but short rails.

All as per item No 1.066 here-in-before but legs.

All as per item No 1.066 here-in-before but head rest.

All as per item No 1.066 here-in-before but foot rest.

All as per item No 1.066 here-in-before but 12mm plywood Top 6'x3'.

All as per item No 1.066 here-in-before but L-clamps of MS 4 mm x 150mm x 40mm.

Repair to Locker Bed Side with mirror FD-222 Removing unserviceable shutters and supply and fixing new shutters which shall be made out of 18mm thick particle board exterior grade, ISI marked, complete as per drg and all as directed.

All as per item No 1.073 here-in-before but top.

All as per item No 1.073 here-in-before but hinges piano type which shall be of steel 3/4" 24 gauge.

All as per item No 1.073 here-in-before but back of lockers which shall be of plywood commercial 5 ply 6 mm thick BWR, ISI marked.

All as per item No 1.073 here-in-before but 100mm handles, extruded aluminium, fabricated type.

All as per item No 1.073 here-in-before but 75mm aluminium anodised hasp and staple.

SIDE BOARD FD-26M 241 S&F in replacement ply back of side board 6mm thick, both side commercial faces ISI mark fixed with nails and fevicol all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.079 here-in-before but side ply (left or right) of side board 12 mm thick, ISI mark fixed with suitable nails and fevicol on frame all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.079 here-in-before but shutter of side board 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.079 here-in-before but 40 mm wide continuous piano hinges fixed with suitable size screw all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.079 here-in-before but front and rear plank of drawer, 1st class hard wood (teak) plank made out in shape duly finished to match with existing complete all as shown in drawing and as directed by Engineer-in-Charge.

Sofa Set Four/Five Seater FD-281 Removing of old unserviceable legs and S&F of new first class hard teak wooden legs size of 70 mm x 35 mm in section complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.084 here-in-before but wooden arm complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.084 here-in-before but wooden front rail of size 35 mm x 100 mm complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.084 here-in-before but wooden Back rail of size 35 mm x 100 mm complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.084 here-in-before but seat wooden battens of size 50 mm x 20 mm complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.084 here-in-before but back frame wooden battens of size 50 mm x 20 mm complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 1.084 here-in-before but cushion seat 560x530x100mm, with 32/48 density, cool foam/ISI mark covered with tapestry cloth, costing not less than Rs. 250/- per RM all as shown in drawing and as directed by Engineer-in-Charge.

Chair Revolving Tilting Low back & high back/Executive Repair of Chair revolving tilting low/high back and executives hydraulic system by Supply and refix the system with replacing of old unserviceable complete all as directed by Engineer-in-Charge.

All as per item No 1.091 here-in-before but seat and back of all chairs with very fine quality Tapestry cloth in the existing place as directed by the Engineer-in-charge.

All as per item No 1.091 here-in-before but high quality ISI marked rolling wheels of bottom of chair revolving low and high back/executive complete all as directed by Engineer-in-Charge.

Recanning of chairs Re-canning of chair dining with cane plastic 2 mm width oval or border of 3 mm wide all around of best quality make premier/shah in Godrej pattern complete as shown on drg and directed.

All as per item No 1.094 here-in-before but chair Writing.

All as per item No 1.094 here-in-before but chair Easy

All as per item No 1.094 here-in-before but chair Verandah

All as per item No 1.094 here-in-before but chair Stool dressing CB

All as per item No 1.094 here-in-before but bin Soiled linen

Polishing of wooden furniture Polishing of almirah large wooden with shelves with best quality french polish, of shade as approved by GE after preparation of surface by rubbing down all unevenness to smoothness with sand paper, pores/holes in the wood filled with paste made out of white (chalk), mitti burnt siena before polishing.

All as per item No 1.100 here-in-before but almirah med wooden with shelves.

All as per item No 1.100 here-in-before but almirah mess utensil.

All as per item No 1.100 here-in-before but book case.

All as per item No 1.100 here-in-before but book shelf open large wooden.

All as per item No 1.100 here-in-before but charpoy newar/bed newar.

All as per item No 1.100 here-in-before but bed hard/bed plywood top.

All as per item No 1.100 here-in-before but chair wooden bottom.

All as per item No 1.100 here-in-before but chair writing.

All as per item No 1.100 here-in-before but chair easy.

All as per item No 1.100 here-in-before but chair dining.

All as per item No 1.100 here-in-before but table 3'x2' without drawer.

All as per item No 1.100 here-in-before but table 3'x2' with drawer.

All as per item No 1.100 here-in-before but table peg.

All as per item No 1.100 here-in-before but teapoy wooden.

All as per item No 1.100 here-in-before but sleeping platform.

All as per item No 1.100 here-in-before but table office clk wooden.

All as per item No 1.100 here-in-before but sofa set 5 seater.

All as per item No 1.100 here-in-before but sofa set 4 seater.

All as per item No 1.100 here-in-before but locker bed side with mirror.

All as per item No 1.100 here-in-before but table 3'x3' (900 x 900 mm).

All as per item No 1.100 here-in-before but table writing.

All as per item No 1.100 here-in-before but table dining 6 pers.

All as per item No 1.100 here-in-before but table dining 8 pers.

All as per item No 1.100 here-in-before but table office offrs wooden.

All as per item No 1.100 here-in-before but charpoy wooden double bunk.

All as per item No 1.100 here-in-before but table centre.

All as per item No 1.100 here-in-before but table bed side.

All as per item No 1.100 here-in-before but chair CBA spl w/hand rest.

All as per item No 1.100 here-in-before but chair dining long back.

All as per item No 1.100 here-in-before but rack record 6'x2'x6'.

All as per item No 1.100 here-in-before but stool dressing CB.

All as per item No 1.100 here-in-before but side board.

All as per item No 1.100 here-in-before but table dressing ladies with mirror.

All as per item No 1.100 here-in-before but table dressing gents with mirror.

BOQ/SCHEDULE 'A' FOR STEEL FURNITURE

Repair to Almirah large steel with shelves FD-1031 Removing unserviceable locks from Almirah large steel and supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej.

All as per item No 2.001 here-in-before but chromium plated steel handle.

M&L for fixing loose shelves of Almirah with suitable nuts and bolts.

All as per item No 2.001 here-in-before but legs of Almirah and supply and fixing new legs as per drg.

Repair to Almirah med steel with shelves FD-1032 Removing unserviceable locks from Almirah medium steel and supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej

All as per item No 2.005 here-in-before but new chromium plated steel handle and fixing with suitable nut,

All as per item No 2.005 here-in-before but fixing loose shelves of Almirah with suitable nuts and bolts

All as per item No 2.005 here-in-before but legs of Almirah and supply and fixing new legs as per drg

Repair to Chair steel tubular with out Arms FD-75 (M) Removing of unserviceable seat and supply and fixing new seat with suitable screws complete all as directed.

All as per item No 2.009 here-in-before but back.

Repair to Chair steel tubular with Arms FD-75 (M) Removing of unserviceable seat and supply and fixing new seat with suitable screws complete all as directed.

All as per item No 2.011 here-in-before but back.

All as per item No 2.011 here-in-before but arms.

All as per item No 2.011 here-in-before but rubber shoes.

Repair to Form with out back FD-77 Removing unserviceable seat planks and supply and fixing new seat plank of Ist class sheesham wood duly seasoned, with suitable nuts and bolts as per drawing duly polished.

All as per item No 2.015 here-in-before but 25 mm MS Square tube not less than 1 mm thickness.

Repair to Form with back FD-78 Removing unserviceable seat planks and Supply and fixing new seat plank of Ist class sheesham wood duly seasoned, with suitable nuts and bolts as per drawing duly polished.

All as per item No 2.017 here-in-before but back rest plank.

All as per item No 2.017 here-in-before but 25 mm MS Square tube not less than 1 mm thickness.

Repair to Table Office Officer steel (FD-84 (M), FD-306 and FD 1003 Removing unserviceable Top and supply and fixing new top made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.020 here-in-before but drawer in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.020 here-in-before but legs of table, 25mm mild steel square tube 1.6mm thick welded with electric welding machine to match with bottom frame all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.020 here-in-before but bottom stiffener of 25mm mild steel square pipe 1.6mm thick welded with electric welding to match with bottom frame all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.020 here-in-before but locks of drawer and fixing new locks with duplicate keys Make : Godrej/Harrison

Repair to Table office clerk steel FD-84 (M) Removing unserviceable Top and supply and fixing of new top made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.025 here-in-before but drawer made of 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.025 here-in-before but locks of drawer and fixing new locks with duplicate keys Make : Godrej/Harrison

Repair to Table 3'x3' Steel FD-291 Removing unserviceable legs and supply and fixing new legs all shown on drg and as directed by the Engineer-in-Charge.

All as per item No 2.028 here-in-before but side rails.

All as per item No 2.028 here-in-before but square tube thickness not less than 1mm.

All as per item No 2.028 here-in-before but top of Table made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Teapoy verandah FD-208 & 255 Removing unserviceable top and S&F new top made out of 18/19mm thick prelaminated particle board, phenol formal dehyde bonded, one side teak wood finish and other side white in colour lamination duly 4mm thick TW beading duly polished around the top fixed with 30/35mm long MS wooden screw on frame including preparing the steel surfaces and applying one coat of synthetic enamel paint on the frame complete all as shown in drawing and as directed by Engineer-in-Charge.

All as per item No 2.032 here-in-before but legs, made of 20mm dia mild steel conduit pipe 1.6mm thickness made to "U" shape with 25mm x 3mm flat iron frame welded to conduit pipe, all as shown in drg or as directed by Engineer-in-Charge.

All as per item No 2.032 here-in-before but stiffeners, 20mm MS tube not less than 1 mm thickness.

Repair to charpoy double bunk steel with ply top Removing of existing broken/damaged Plywood top and supply & fixing new top of ply 12mm thick, 6'x3' as per drg and as directed.

Repair to Charpoy with Hard Top FD/MAP-II/01 M&L Removing unserviceable ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with MS screws 6mm dia including washer and nuts as directed by Engineer-in-Charge.

Repair to Charpoy GI Pipe with Nylon Newar FD-220 Removing unserviceable long rails from charpoy GI Pipe and supply and fixing new GI long rail as per IS-1239 medium grade 32 mm bore duly threaded as shown in drg.

M&L for conversion of GI long rail obtained vide item 2.037 into short rail and fixing to charpoy after duly threading as required and as shown on drawing to replace unserviceable short rails.

M&L for conversion of GI short rail obtained vide item 2.038 into leg and fixing to charpoy after duly threading as required and as shown on drawing to replace unserviceable leg.

Removing old unserviceable GI elbow from charpoy GI and supply and fixing new GI elbow three way ISI mark (medium grade) 32 mm.

All as per item No 2.040 here-in-before but GI check nut.

Repair to Charpoy GI Pipe with ply wood top FD-220 Removing unserviceable long rails and supply and fixing new GI long rail as per IS-1239 med grade 32 mm bore duly threaded as shown in drg.

Removing unserviceable ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with 13 MS bolt 6mm dia including washer and nuts as directed by Engineer-in-Charge.

M&L for conversion of GI long rail obtained vide item 2.042 into short rail and fixing to charpoy after duly threading as reqd and as shown on drawing to replace unserviceable short rails.

M&L for conversion of GI short rail obtained vide item 2.044 into leg and fixing to charpoy after duly threading as reqd and as shown on drawing to replace unserviceable leg.

Removing old unserviceable GI elbow from charpoy GI and supply and fixing new GI elbow three way ISI mark (medium grade) 32 mm.

All as per item No 2.046 here-in-before but GI check nut.

Repair to Locker Bed Side Steel FD-1029 Removing of old unserviceable handles and supply and fixing new chromium plated steel handle 100mm long as specified and directed.

All as per item No 2.048 here-in-before but safety type hasp and staple of size 75x60x3mm as specified and directed.

M&L for fixing loose shelves of locker bed side steel as per drg but thickness not less than 1mm

All as per item No 2.048 here-in-before but doors of thickness as per drawing but not less than 1 mm thick.

All as per item No 2.048 here-in-before but legs of thickness as per drawing but not less than 1 mm thick.

Book Case Steel FD-1028/1026 Replacement of steel handle with new handle of size 100mm long (ISI Marked) to fix in shutter of compartment, where required to match with existing all as shown in drg and as directed by Engineer-in-Charge.

All as per item No 2.053 here-in-before but locking device with lock 50mm dia four lever, fixed by machine screw all as shown in drg and as directed by Engineer-in-Charge.

All as per item No 2.053 here-in-before but broken glass 5.5mm thick in shutter of compartment, where required to match with existing all as shown in drg and as directed by Engineer-in-Charge.

All as per item No 2.053 here-in-before but shutter of thickness as per drawing but not less than 1 mm thick.

All as per item No 2.053 here-in-before but legs of thickness as per drawing but not less than 1 mm thick.

Gas / Electric seamless welding Gas / Electric seamless welding 6 mm thick to various steel furniture members and components where required including grinding filling the welding surface to match the existing surface complete.

Painting to steel furniture Painting to Almirah steel large with shelves with one or more coats as required of Olive Green/ Black/white paint by spray painting both inside and outside after removing of dents of steel surface, applying putty of good quality as approved in dented surfaces to make surface flush with existing surface as directed by Engineer-in-Charge.

All as per item No 2.059 here-in-before but almirah steel med with shelves.

All as per item No 2.059 here-in-before but chair tubular steel with arms.

All as per item No 2.059 here-in-before but chair tubular steel without arms.

All as per item No 2.059 here-in-before but form with back (Frame only).

All as per item No 2.059 here-in-before but form without back (Frame only).

All as per item No 2.059 here-in-before but table office offrs steel.

All as per item No 2.059 here-in-before but table office clk steel.

All as per item No 2.059 here-in-before but chair verandah.

All as per item No 2.059 here-in-before but locker bed side steel.

All as per item No 2.059 here-in-before but table dining OR (Frame only).

All as per item No 2.059 here-in-before but FMN set of all Charpoy GI Pipe nylon newar & Ply top/Bed hard.

All as per item No 2.059 here-in-before but table 3'x2' without drawer steel.

All as per item No 2.059 here-in-before but table 3'x2' with drawer steel.

All as per item No 2.059 here-in-before but tresstle store room steel.

All as per item No 2.059 here-in-before but riffle rack for 16/30/60 rifles

All as per item No 2.059 here-in-before but charpoy with hard top MAP-II/I.

All as per item No 2.059 here-in-before but teapoy verandah.

M/s FAYAZ AHAMD WANI AND SONS (BID ID -3489512)

M/S RAJ ENGINEERS (BID ID -3490739)