ADDN ALTN CUM SPL REPAIR OF BLDG NO P 70 AND P 76 PROVN OF TOILET AND BATHROOM AT BLDG NO 23 PROVN OF PCC PATHWAY FOR BLDG NO P 43 AT KANJOLI LINES OF 39 FAD UNDER GE BHARATPUR AND PROVN OF SECURITY DOOR AT ENTRANCE OF STN HQ BHARATPUR AND REPLACEMEN

Amount

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified.

M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius, built in cement and sand mortar (1:6), complete all as specified.

Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brickwork or cement concrete surfaces including finishing the surface even and smooth, complete.

M&L for rendering 10 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub floor/sub base complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.

M&L for vitrified ceramic tiles, 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

M&L for glazed ceramic tiles, coloured/printed tiles in vertical surface of size 450x300x7 mm thick, laid over and including 10 mm thick rendering in cement mortar (1:4) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified.

M&L for 18 - 20 mm thick black machine cut granite slab (of any type) (table rubbed and polished), as in steps, jambs, pillars, window- cills, cooking platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick screed in cement and sand mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Sand stone slabs 50mm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified.

M&L for rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situation including making of hole suitable for gas pipe etc. complete all as specified.

M&L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm in newly plastered surface complete all as specified.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over a coat of alkali resistant primer with 3mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling & applying two coats of oil emulsion distemper white or tinted over a coat of primer complete all as specified.

Dismantling wall lining and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S&F anodised aluminium snap grid frame work of grid size 605 x 605 mm false ceiling complete all as specified.

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F for 4 mm thick non-asbestos fibre cement building boards fixed to aluminium framework, complete all as specified. Note: Frame work for ceiling shall be measured and paid separately)

S&F for PVC wall panelling with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as per manufacturer's instructions complete all as specified .

Dismantling asbestos cement/galvalume/fibre glass (corrugated or semi corrugated) sheets in roof coverings, complete all as specified.

Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.

Pre painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, MS Pipes) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified.

M&L for painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and smooth without using extra cement complete all as specified.

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified.

All as per item No 31 above but S&F in repair.

S&F in repair powder coated aluminium window/ ventilator shutters side hungs type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100 mm long (2 No), suitable handle (No 01) etc for each leaf, complete all as specified.

S&F powder coated aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 02 Nos aluminium handle each door, hinges, anodised aluminium snap beading screws etc, complete all as specified.

All as per item No 34 above but S&F in repair

S&F aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc complete all as specified.

All as per item No 36 above but S&F in repair

S&F 5.5 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality exc 0.5 Sqm in each pane complete all as specified.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified.

S/F Prelaminated particle board, interior grade 9mm thick prelaminated one side with decorative choice lamination both side, fixed with screws to timber frame work complete all as specified.

S&F Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body), suitable for door shutters, complete all as specified.

S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified.

S&F 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified.

Dismantling boarding of any description, fixed in any position with nails, complete all as specified.

M&L for 18 mm thick PVC boarding shutters of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern complete all as specified.

M&L for 18 mm thick PVC boarding shelves of density exc 550 Kg per Cum but nexc 600 Kg per Cum white plain sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required, Supported for three sides with 18 mm x 18 mm PVC Ply fixed with Screw all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern complete all as specified.

S&F for stainless steel 125 mm handle not less than 12 mm dia suitable for cupboard shutters with self tapping stanless steel screw complete all as specified.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified.

S&F Magnet catch for shutters as per approved sample complete all as specified.

Taking down chowkats or frames n. exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified.

S & F for Solid PVC Door Frame of the size 50 x 47mm made out of 5 mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. The profile shall be cut and mitred at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed complete all as specified.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified & shown on SSR 2020 (Part-II) complete all as specified.

S&F SS hinges medium weight of size 100 mm, complete all as specified.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified.

S&F aluminium anodised,barrel tower bolts of extruded section, 200 mm length of bolt and fixed with screws, complete all as specified.

Cutting or uprooting grass incl removing old mud phuska/ roof treatment of 100mm thickness and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof padding complete all as specified.

M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:4, finished even and smooth without using extra cement complete all as specified.

Providing and laying APP(Atactic Polypropylene polymer) modified prefabricated five layer 4mm thick water proofing membrane,black finished reinforces with nonwoven polyester matt consisting of a coat of bitumen primer of bitumen membrane @ 0.40 litre/sqm by the same membrane manufacturer of density at 25 degree C 0.87-0.89 Kg/litre and viscosity 70--160cps.Over the primer coat the layer of membrane shall be laid using Butane torch and seiling all joints etc and preparing the surface complete. The vitalphysical and chemical parameters of the membarane shall be as under: Joint strength in longitudinal and transvrese direction at 23 degree C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membarane not less than 150 degree C. Cold flexibility shall be up to -2 degree C when tested in accordance with ASTM,D complete all as specified.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified.

S&F GI tubing medium grade galvanised ISI marked with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

S&F GI tubing medium grade galvanised ISI marked with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

S&F in repair Bib tap, cast copper alloy long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified.

S&F pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" for 15 mm nominal bore , screwed for iron pipe and fixed complete all as specified.

All as per item No 66 above but S&F in repair.

S&F 15 mm bore stop valves, cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified.

All as per item No 68 above but S&F in repair.

S&F Vitreous China wash hand basin, white, flat back, size 550x400mm including brackets & waste pipe of PVC 32 mm bore of low or high densitycomplete all as specified.

All as per item No 70 above but S&F in repair.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified.

All as per item No 73 above but S&F in repair.

S & F of chromium plated shower rose 125 mm dia with 200 mm long CP arm with swivel joints, any size, including fixing to steel pipe or union complete all as specified.

All as per item No 75 above but S&F in repair.

S/F in repair PVC (SWR) floor trap 75mm dia plain with stainless steel grating including jointing with solvent cement complete all as specified.

S&F in repair of Tubular towel rail brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified.

S&F Low density polyethylene (LDPE) pipes 40mm of pressure rating 6 kgf/sq. cm including connected accessories complete all as specified.

S&F vitreous china squatting pan,Órissa pattern size 580 x 440 mm white, with integral foot rest and CI 'P' trap complete all as specified.

All as per item No 80 above but S&F in repair.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, 10 lit capacity with inlet, ball valve, float and handle including brackets complete all as specified.

All as per item No 82 above but S&F in repair.

S & F 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified.

All as per item No 84 above but including dismantling of existing tank.

S&F in repair PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 142 grams for ball only) complete all as specified.

M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified.

S&F welded steel wire fabric ,weight n. exc 4.00 kg/sq. m fixed to steel members complete all as specified.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15 mm thick screed in CM (1:6), complete all as specified.

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1. 5 metre in depth; for foundation or for manholes not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified.

Returning filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm depth in soft/loose soil complete all as specified.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius in half brick thick wall built in cement & sand mortar 1:4, complete all as specified.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces complete all as specified.

S&F 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete as as specified.

S&F Bib tap, cast copper alloy, chromium plated, fancy type long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified.

S&F of Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe including waste pipe complete all as specified.

S&F of Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.

M &L PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified.

S&F 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified.

Supply only PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt -210 grams) complete all as specified.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, in walls, type 'B' ISI marked of 110 mm bore complete all as specified.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall,in walls, type 'B' ISI marked of 75 mm bore complete all as specified.

S&F PVC (SWR) bend of 110 mm bore with access door of any radius complete all as specified.

S&F PVC (SWR) bend of 75mm bore with access door of any radius complete all as specified.

S&F PVC (SWR) vent cowl of 75mm bore complete all as specified.

M&L for preparation of new plastered surfaces and applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of cement base paint with roller application over one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified.

S&F rolled mild steel work Joist, channel, angle, or tee sections,Fe-410- W(Gde E-250 fixed independently, without connecting plates, etc. (cut toordinary lengths) complete all as specified.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size as approved by GE, confirming to IS 15658-2006, M-35 Grade over and including 25mm thick sand cushioning complete all as specified.

M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 150 mm set in cement mortar (1:4), complete all as specified.

Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels, drains and inside the manhole complete all as specified.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.

Removing surplus spoil to distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified.

Surface excavation not exceeding 30 cm deep and average 15cm deep and getting out in soft / loose soil, complete all as specified.

All as per item No 116 above but for every 3 cm or part there of above or below 15 cm average depth complete all as specified.

M&L for broken stone or boulders in hardcore of gauge N. exc 63 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified.

M&L Cement concrete work 200mm thick in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, complete all as specified. Note : Floter with necessary arrangements required to finish the concrete surface to be provided by contractor.

M&L for forming 12mm thick Expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' compete all as specified.

M&L for forming contraction (Dummy) Joints 65mm deep x 10mm wide filled with grade A sealing compound complete all as specified.

Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed complete all as specified.

Providing & fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing & fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement, making necessary holes and writing letters or figures, making symbols (block, Roman, Italic or Indian) etc, required door fittings complete all as specified. Note:- Rate of door handle, Lock & floor spring (including all connected accessories) shall be inclusive in quoted rate.

S&F for galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples or rivets, complete all as specified.

S&F MS butt hinges medium weight cold rolled of size 100mm, complete all as specified.

M & L for preparation of new plastered surfaces including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint with roller application over one coat of water based white pigmented akali resistant priming paint for external wall over 1mm thick white external wall cement putty, complete all as specified.

Complete removal of existing treatment on wall including washing rubbing down and stopping of distempered and painted surface and preparing old surface including sand paper genle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint with roller application over one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches. complete all as specified. (Note :- Punning thickness shall be measured.)

M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified.

Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes:-

(a) 16 Sqmm 4 core

(b) 10 Sqmm 2 core

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified for the following :-

(a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch.

(c) One bell/buzzer point controlled by one push button.

(d) One 3 pin 6 Amp socket point outlet on the same board with other switches

(e) One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 131 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board complete all as specified.

M&L bell multi musical type 230 volts grade complete all as specified.

S&F modular Socket, 6A - 2/3 pin combined 2 module 230 volt complete all as specified.

S&F modular Socket 6A/16A - 2/3 pin combined 2 module 230 volt complete all as specified.

S&F modular switch 1 way 6 Amps 1module 230 volt grade complete all as specified.

S&F modular switch 1 way 16 Amps 1module 230 volt grade complete all as specified.

S&F modular bell push flush type 5 Amps 230 volts complete all as specified.

S&F modular step type electronic fan regulator 2 module 120 watt complete all as specified.

S & F white cover plate with frame,2 module complete all as specified.

S & F white cover plate with frame,6 module complete all as specified.

S & F white cover plate with frame,8 module complete all as specified.

S & F white cover plate with frame,3 module complete all as specified.

S & F Metal flush box 2 module complete all as specified.

S & F Metal flush box 8 module complete all as specified.

S & F Metal flush box 3 module complete all as specified.

S & F Metal flush box 6 module complete all as specified.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 415/240 volt of the following DBs :-.

(a) 4 way TPN with 200 amps rated busbar 240 volts (double door type) complete all as specified.

(b) 8 way SPN with 200 amps rated busbar 240 volts (double door type) complete all as specified.

(c) 4 way SPN with 200 amps rated busbar 240 volts (double door type) complete all as specified.

S&F MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating.

(a) MCB TPN 63 Amps, 415 volt

(b) MCB SP 240 volts 10-32 Amps

(c) MCB SPN 40 Amps, 240 volt

(d) MCB SP 240 volts 6-32 Amps C Curve

(e) MCB SP 32 volts 240 Volt C Curve

M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling etc complete all as specified.

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm Cat Part No:DIJB12LT8-20 and Lamp -LGT8-20-865-2, complete all as specified.

Supply and fixing sensor based 20 watt LED tubelight fitting batten type 4 X feet long with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified.

Supply and fixing LED mirror light fitting with high out put with low energy consumption of capacity 6 watt,waterproof moisture anti-fog anti-corrosion anti-rust,curved LED off-white including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to the jucntion box and fixing to complete all as specified.

S&F LED Recessed full lit luminaire with glare free uniform illumination 2 ft x 2 ft, 35/36 Watt , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified.

M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 14 W LED lamp B22 base complete all as specified.

S & F street light GI bracket of 0.6 & 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete all as specified.

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm complete all as specified. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI, pipe and GI strip beyond 7.5) will be measured separately under respective item.

Cutting chases,pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps cills,sunshades,shelves lintel etc.and cutting chases for concealed water tubing or concealed conduit wiring etc,and making good cutting not exc 10 cm girth on stone concrete block or slab walls complete all as specified.

S&F in repair modular sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 25 Amps, 240 volts complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 MM complete all as specified.

M&L for cutting suitable holes in existing masonary wall and fixing suitable size hume pipe for fixing of exhaust fan 250/300 mm dia and making good disturbed surfaces with cement mortar (1:4) and finished to match existing surface complete all as specified.

S&F ceiling fan (white) of 1200 mm sweep, 5 star rating copper wound with super energy efficient BLDC motor including remot,connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete and old U/s fan deposited to AGE E/M yard complete all as specified. Model No- Efficiencia Neo

S&L pipe galvanised light grade complete including fittings 40mm dia complete all as specified.

Boring of holes under road, pavement, hard standing necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified.

S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt complete all as specified.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt complete all as specified.

S&F switch piano flush button single pole one way 16 Amps 230 volt grade complete all as specified.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F exhaust fan of 300 mm sweep 900 rpm with suitable size of MS louvers duly painted , connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor including all standard accessories complete all as specified.

Supply and fix Water heater storage type, electric, capacity 25 litres.BEE 5 star rated complete all as specified.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 40 mm bore complete all as specified.

M&L of gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified.

M&L of MS clamp /saddle piece made out of MS flat iron suitable to make ferrule and clamping for branch connections complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe including drilling as per site requirement complete with MS nuts, bolts, washers and rubber packing for complete of size 100/80 mm pipe complete all as specified.

Earthing complete with galvanised steel earth plate electrode 600X600XX6 mm buried directly in ground (earth pit not less than 2.25 mtr below the ground level) with top edge of the plate, depth not less than 1.5 mtr below the normal ground level connected to galvanised iron strip 32X 6mm as earthing lead by means of bolts, nuts and washers of galvanized iron sor stel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated testing on completion.

GOVIND CONSTRUCTION (BID ID -3363899)

K P BUILDERS (BID ID -3364251)

Tulsi Enterprises (BID ID -3369574)