REPAIR/ REPLACEMENT OF PLUMBING, CLEANING OF OVERHEAD TANKS SANITARY FITTINGS AND CERTAIN B/R MAINT WORKS AT MIL STN KALUCHAK UNDER GE KALUCHAK

Amount

Dismantling water tanks of any description, 500 litre capacity and removing from site complete all as specified and directed.

Dismantling water tanks of any description, 1000 litre capacity and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks. (cylindrical vertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity , all as specified in SSR Part-I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity , all as specified in SSR Part-I complete all as specified and directed.

Disconnecting existing PVC tanks, setting aside (or lowering if required) for repair, cleaning and removing all scale and dirt by using bleaching powder from tank and fro mouth of cirulating pipes etc and hosting if required reconnecting and refixing in position of capacity exc 500 ltrs but not exceeding 1000 ltrs and making good for running of water from tank to inside of bldgs and letter writing of date of cleaning and due on of synthetic enamel paint and complete all as specified and directed. Note : Bleaching powder and like shall be included in this items.

Disconnecting existing PVC tanks, setting aside (or lowering if required) for repair, cleaning and removing all scale and dirt etc using bleaching powder from tank and from mouth of cirulating pipes etc and hosting if required reconnecting and refixing in position of capacity exc 250 ltrs but not exceeding 500 ltrs and making good for running of water from tank to inside of the bldgs and letter writing of date of cleaning and due on of synthetic enamel paint and complete all as specified and directed. Note : Bleaching powder and like shall be included in this items.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc 1Sqm but n exc 2 sqm each and removing from site complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement.

Dismantling/Taking down PVC / AC pipes of exc 50 mm but not exc 100mm dia with all incuding fittings complete all as specified and directed.

M&L for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed.

S&F for Butt hinges 100 mm long, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

M&L for Aluminium, anodised, handles 125 mm of extruded section and fixed complete all as specified and directed.

M&L for PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete including fixing clamps etc with nut and bolts fixed in repair complete all as specified and directed.

M&L for Cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete, all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, all as directed.

M&L for Galvanized steel water tubing, 15 mm bore, medium grade, with all fittings , fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

ditto as per item 21 above but fixing only complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, all as directed.

M&L for Galvanized steel water tubing, 20 mm bore, medium grade, with all fittings , fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

ditto as per item 24 above but fixing only complete all as specified and directed.

S&F in repairs PVC lid cover for water storage tank for 500ltr/1000 ltr and all as specified and directed by engr-in-Charge.

S&F PVC floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 size 75mm fixed in repair complete all as specified and directed.

M&L for Bib tap brass, fancy type, chromium plated, (long body), cast copper alloy with crutch or butterfly handle, screwed down screwed for 15 mm bore iron pipe or for brass ferrule and fixed "as in repair" complete all as specified and directed.

M & L for Bib tap standard of PTMT any colour high pressure screwed for 15mm bore iron pipe and fixed "as in repair" .(Minimum weight 15mm-90gms) complete all as specified and directed.

S & F for Chromium plated Angle valve /Stop valve cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified fixed in repair complete all as specified and directed.

S & F in repair Stop valve but fancy type, chromium plated with long shank and cup (concealed type), with crutch handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.

M & L for Chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union fixed in repair complete all as specified and directed.

S & F for Brass Chromium plated Wall mixer 15mm bore for mixing “Hot or cold” water screwed down for iron pipe” fixed in repairs complete all as specified and directed.

S & F for Brass Chromium plated WHB pillar mixer 15mm bore for mixing “Hot or cold” water screwed down for iron pipe” fixed in repairs complete all as specified and directed.

S & F for Pillar tap 15mm bore cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered “Hot or cold” and fixed in repair completed all as specified complete all as specified and directed.

S & F for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair complete of 20 mm bore dia complete all as specified and directed.

S & F for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair complete of 15 mm bore dia complete all as specified and directed.

S & F in repair vitreous China urinal, half stall, white (back or corner wall type), with grating and union for discharge pipe (excluding flushing cistern and flush pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including chromium plated urinal spreader of suitable size and 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and union for discharge pipe and and waste pipe, complete all as specified and directed.

M&L for Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , plastic seat cover and fixing of flushing cistern, brackets, flushing pipe etc, fixed in repairs, complete all as specified.

M&L for Vitreous china Orissa pan of pattern, long pan size 550x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete fixed in repairs including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe fixed in repair.

S & F in repair Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including pedastal,32 mm waste pipe or granite for and pinning in ends of brackets or erecting stand complete with CP brass waste fitting 32 mm with long screwed shanks and flynuts all as specified and directed.

S&F PVC waste pipe 32 mm dia for WHB and Urinal Pot "fixed in repair"complete all as specified and directed.

S&F PVC waste pipe 40 mm dia for Kitchen Sink "fixed in repair" complete all as specified and directed.

M & L for CP health faucet including 1.2 meter PVC tube flexible and wall hook for EWC fixed with chromium plated brass screws fixed in repair complete all as specified and directed.

Supply and fix in repair PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float and handle including PVC connection 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

M&L for 20mm Gun-metal,gate valves,with iron wheelhead, screwedboth ends for iron pipe and "fixed in repair" complete all as specified and directed.

S & F in repair CP 32mm Waste coupling for WHB (half or full threaded) complete all as specified and directed.

S & F in repair 40mm Waste coupling for Sink complete all as specified and directed.

S & F in repair CP soap dish all as spd complete all as specified and directed.

S &F in repair stainless steel toilet paper holder all as spd and directed.

S & F in repair for corner glass shelf (with bracket ) all as specified and directed.

S &F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long "as in repair" complete all as specified and directed.

S &F in repair CP Towel Ring with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repair stainless sink with drainage board 1 mm thick with Sink waste coupling ,plug, washer & waste, incl bedding cement mortar, overall size 915 X 460 mm, bowl size 410 X 330 X 160 mm complete all as specified and directed.

S & F in repair Stainless steel plate rack 600mm x 750mm and 250mm deep made out of 1mm thick stainless steel sheet including shelves etc complete

S & F in repair PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and directed.

S & F in repair PVC connection 60 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and directed.

S&F CP tubular Towel Rail 600mm long fixed with and including chromimum plated brass screws and wooded/plastic cleats fixed in repairs complete all as specified and directed.

S & F CP Grating doom 100 mm dia of fixed in repair complete all as specified.

M&L for PVC seat cover for EWC fixed in repair complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from matel frame including punching or drilling out old glazing pins/spribng clips and providing and fixing new onces exc 1.5 Sqm complete all as specified and directed.

S&F, 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane ( upto to tripple story bldg) , complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion (incl for finishing to dry dash or rough cast) over a coat of chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and directed.

S & F in repair mild steel Mortice lock size 75mm mm complete all as specified and directed.

M&L for Granite(of any type) tiles 18-20mm thick machine cut, bedded in slab and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and directed.

S & F In repair single piece EWC (size 710 x 375 x 660mm) with soft close seat cover with P & S trap and fixing accessories and twin flush fittings complete all as specified and directed.

Demolition of cement concrete (un-reinforcement) of any description in sunken portion carefully without damaging adjoining structure all as directed.

M&L for Water proofing treatment to sunken portion with 15mm thick plaster in cement mortar 1:4 (with integral waterproofing compound both on floor and wall. The surface and cured and allowed to dry; apply epoxy resins coating, polymer modified cementations coatng like brush bond of fosroc, pedilite and bostic as per manufacturers instructions both on floor as well on wall. The sunken slab shall be laid to a slope of 1:40 outwards with 25mm bore GI pipe spout projecting at least 150mm beyond outer face of wall . floor area of WC and bath upto 2.0 Sqm complete all as specified and directed Note :- GI spout 25mm bore light grade, PCC 1:4:8 type D2 , PCC 1:5:10 type E2 and WC /EWC shall be measured and paid separately under relevant item.

M & L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in mass filling in sunken portion of slab complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate 75mm thick as a base in sunken portion of slab complete all as specified and directed.

M&L for GI spout 25 mm bore light grade,including cutting holes in walls and making good in cement mortar 1:3 , complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes complete all as specified and directed.

M & L for Non skid ceramic colored tiles 7 to 8 mm thick (square/rectangular) area of each tiles excedding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in colored cement to match coloured tiles including taking down shutter and refixing in same placecomplete all as specified and directed.

Non skid ceramic colored tiles 7 to 8 mm thick (square/rectangular) area of each tiles excedding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in colored cement to match coloured tiles including taking down shutter and refixing in same place complete all as specified and directed.

M&L for Colored glazed ceramic tiles 450x 300 x 7 mm thick, for work on vertical surfaces such as skirting, dado and riser to steps etc. jointed in neat cement slurry and pointed in colored cement to match colour tiles incl 10mm thick C.M plaster including taking down shutter and refixing in same place complete all as specified and directed.

M&L for preparing of old plastered surfaces of Ceiling, old decorated surfaces and applying two coat Distemper complete all as specified and directed.

M & L for preparing of old plastered surfaces of wall and applying one coats of cement based paint complete all as specified and directed.

Complete removal of existing treatment of any description by washing, rubbing down and stopping of distempered/painted wall surfaces and applying two coats of oil bound emulsion over 1mm thick wall putty, complete all as specified and directed.

Complete removal of existing treatment of walls surfaces including brooming down or steel wire brushing scraping down smoke soot , mould, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of primer over two coats of weather proof exterior emulsion paint of anti fungal nature over one coat of primer on walls complete all as specified and directed . Note : The work will be carried out upto tripple storey building the rate of scafolding is included for this item also.

S & F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet In strips & channel feathered a the edges inclusive of solvent cment and fixing at site on PVC frame as per specifications and complete all as specified and directed.

S & F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and complete all as specified and directed

JK BUILDERS AND DEVELOPERS (BID ID -3500515)

Pyramid constructions (BID ID -3507148)

AKSHAY CONSTRUCTION COMPANY (BID ID -3502744)

M/s Anand Prakash (BID ID -3501422)