ADDITION ALTERATION TO SERVANT QUARTERS AND RAMP AT BLDG No. 27 AND PROVISION OF PAVER BLOCKS AT CG HOUSE UNDER GE HADDO

Amount

Excavation over areas not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Removing excavated material (soils) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Removing excavated material (soils) to a distance exceeding 1.50 Km but not exceeding 5.0 Km and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of PCC block masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling PVC (SWR)/ cast iron pipes of 110mm dia in any position alongwith all fittings and fixtures by removing at joints complete all as specified and as directed.

Dismantling PVC (SWR)/ cast iron pipes of 75mm dia in any position alongwith all fittings and fixtures by removing at joints complete all as specified and as directed.

M&L for hardcore using broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for hardcore using broken stone or boulders of gauge exceeding 63 mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for Cutting chases in PCC block masonry walls, for shelves, lintels, edges of landing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for pre-cast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in kerbs and string courses and setting in cement mortar (1:6) including necessary excavation for placing along the path etc., complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, cooking platforms and in shelves and the like complete all as specified and as directed.

M&L for cement concrete work in pavement/ hardstanding of flexural strength 40Kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

M&L for finishing surface of concrete roads, pavements, by brooming complete all as specified and as directed.

M&L for sand (river sand) filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block, glossy finished, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade, made of grey cement and pigments, any pattern, laid in floors, laid dry including filleting to edges in CM (1:4) complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and as directed.

S&F 20 mm dia Harrison rails anodized aluminium alloy with fixing brackets, stops, rollers etc., fixed in repairs complete all as specified and as directed.

M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished fair and even complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete as in ceilings, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound.

M&L for preparation of newly plastered/concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for aluminium anodised door/window/ventilator shutters fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete all as specified and as directed. NOTES: (i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc. (iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of primer including one coat of wall care putty complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of distemper oil emulsion over a coat of primer including 3mm wall care putty after filling the cracks with filler complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls of any description and applying two coats of weather proof antifungal (exterior grade) acrylic emulsion over a coat of primer including filling the cracks with filler complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of white wash after filling the cracks, holes with filler complete all as specified and as directed.

Supply only 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply only 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply only aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Supply only aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm, fixed in repairs complete all as specified and as directed.

S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), as in doors/windows/cup boards/kitchen cabinets etc., area not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), as in doors/windows/cup boards/kitchen cabinets etc., area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core, 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing fixed to door frame complete all as specified and as directed.

S&F Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preservative treatment complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.

S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for second class hard wood (Hollock) plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and as directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.

M&L for stainless steel hollow sections circular/square/rectangular in shape and any size and thickness, grade AISI-316 type (Austenitic anti-corrosive in nature) as in railings/grills/designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixed in any location complete all as specified and as directed.

M&L for 20mm thick granite work (of any type and shade as approved) table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms, wash basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick cement mortar (1:4) bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding (chamfering) the edges complete all as specified and directed.

M&L for machine cut polished cudappah stone slab 20-25mm thick as in verticals and horizontals supports for shelves and the like including necessary jointing and pointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing rounding (chamfering) the edges and making good disturbed surfaces to match with surroundings complete all as specified and as directed.

M&L for 5mm thick plain colour PVC sheet in strips & channel feathered at the edges to required size & shape for fixing on aluminium partitions /doors inclusive of solvent cement/fixing clips complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, brackets/clamps for eaves and valley gutter and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, P or S trap including provision of lime concrete bedding with and including PVC valveless, syphonic action type, flushing cistern 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32 mm dia, PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs complete all as specified and as directed.

M&L for PVC connections 15mm size with PTMT nuts of length 600mm, fixed in repairs complete all as specified and as directed.

Drilling holes with drilling machine for bolts, gas pipes, etc., not exceeding 25mm dia, each hole of 10cm depth complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² including fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.

S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F plate rack of stainless steel of size 900mm x 750mm with steel shelves & hanging arrangements for utensils complete all as specified and as directed. Make : Nirali / Anumol / Prayag or equivalent.

M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 8 to 10 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 8 to 10 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, for work on vertical surfaces such as skirting, dados and risers to steps etc., including 10mm thick backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Roughening surfaces of old concrete floor surface by hammer, picking, sweeping clean and washing down with water to remove dust etc., complete all as specified and as directed.

S&F kitchen sink without drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F bib tap, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, fixed in repairs complete all as specified and as directed.

S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.

S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, high pressure, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.

S&F shower rose, brass, chromium plated, 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union, 15mm dia, fixed in repairs complete all as specified and as directed.

S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long, fixed in repairs complete all as specified and as directed.

S&F soap dish, brass, chromium plated, fixed to wall with rawl plug and brass screws, fixed in repairs complete all as specified and as directed.

S&F 110mm bore UPVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints, laid in trenches/fixed to walls/placed in weep holes using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 75mm bore UPVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints, laid in trenches/fixed to walls/placed in weep holes using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal, diameter of outlet 110 mm complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal, diameter of outlet 75 mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of diameter 110 mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of diameter 75 mm complete all as specified and as directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet 75 mm, fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, diameter of outlet 75 mm complete all as specified and as directed.

S&F UPVC (SWR) bends any radius, diameter of outlet 110 mm complete all as specified and as directed.

S&F UPVC (SWR) bends any radius, diameter of outlet 75 mm complete all as specified and as directed.

M&L precast cement concrete solid blocks not exceeding 10 cm thick (with plain or interlocking as directed) complete in walls type C1 1:3:6 (Using 20 mm graded stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed.

CHANDER SEKER ENTERPRISE

NAWAZ CONSTRUCTIONS

Sree Tirumala Enterprises

S B Sen Gupta

MS KAMARIKAR CONSTRUCTION

P NAIDU