Special repair to roads and renewal and replacement of road furniture of 88 Armd Regt at Mil Stn Kapurthala

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and depth exceeding 50mm and not exc 100 mm deep including removal of rubbish material not exceeding 50 m. Complete all as specified and directed by Engineer-In-Charge.

Providing 150 mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stones, interstices filled, surfaces formed and rolled & consolidated to required gradient & chamber with 8 to 12 tonne power roller, complete all as specified and as directed.

Providing Two layer of 75 mm thick each (compacted thickness) WBM with coarse aggregates of lime/sand stone, flint or quartzite of grading 2 (63 mm to 40 mm size) spread, rolled and consolidated to gradient and chamber required with power roller 8 to 12 tonne complete all as specified and as directed.

Material & Labour for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all loose dirt . Complete all as specified and directed by Engr-in-Charge.

M&L for applying evenly a priming/tack coat with paving bitumen VG-10 / cold emulsion at the rate of 10 Kg per 10 Sqm on bitumen macadam road surface and laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller. Complete all as specified and directed by Engineer-In-Charge. Note : Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10/cold emulsion at the rate of 5 Kg per 10 Sqm on road surface, laying, rolling, consolidating 30mm thick consolidated thickness bituminous premixed semi dense asphaltic concrete carpet with 5.5% binder content of bitumin grade VG-30 by weight of total mix laid with mechanical paver, rolled and compacted to required camber and gradient with pressure roller and 8 to 10 tonne power road roller and be achieved a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note : Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to atleast 25mm in depth and applying tack coat with paving bitumen VG-10 at the rate of 5 kg per 10 sqm , making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal)

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. Make of paint :- 3M/VERTEX/JCC. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens with reflector of model no. DA 972.0 fixed with and incl. MS stud of suitable size as per manufacturers instruction.

S&F in repair solar cat eye (SOLAR STUDD) aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency monorystafie solar panel 2.4V/ 1600MA) consisting of super Led with 10000-18000 MCD completed as per manufacturers instruction etc all as specified and directed.

M&L Precast cement concrete block masonary with solid block (size 30x20x15 cm) as in edging ,type B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified.

M&L for two coats of synthetic enamel paint on newly plastered/repaired surfaces of road side kerb stone any type , any description over 10 cm width or girth not otherwise described incl. preparation and priming coat of newly plastered surfaces of kerb stone all as specified and directed by engineer-in-charge Note : Cost of repair of kerb stone by any means like plastering or concreting deemed in this item

Demolition of brick work built in cement mortar incl quoins ,arches and pillars etc. all as specified and directed by Engineer – in - Charge.

Motorway Constructions (BID ID -3125339)