Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.7 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹49.1 L+₹89,263.06 (1.85%)Rejected-Finance SWAMIJI SARANI HAKIMPARA P O SILIGURI 734001 DIST DARJEELING WB | JALPAIGURI | WEST BENGAL | 734001 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹49.4 L+₹1.1 L (2.35%)Rejected-Finance GEETANJALI COMPLEX B BLOCK 2ND FLOOR MUKUNDA DAS ROAD MILANPALLY SILIGURI 734405 DARJEELING | SILIGURI | DARJEELING | WB | 734405 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹49.4 L+₹1.2 L (2.51%)Rejected-Finance 30 HAREN MUKHERJEE ROAD HAKIMPARA SILIGURI 734 001 DARIEELING WB | DARJEELING | WEST BENGAL | 734001 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹49.6 L+₹1.3 L (2.79%)Rejected-Finance DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 | JALPAIGURI | WEST BENGAL | 734004 | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹39.0 L
EMD Value
₹78,040
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
ADDITION/ ALTERATION TO BLDG NO. T/7, T/8, T/9 (OR) TOILET A COY AND ASSOCIATED WORKS OF 5133 ASC BN UNDER AGE B/R II, U AREA AND CERTAIN OTHER SANCTIONED WORKS IN SUKNA MIL STN OF GE SUKNA
2022_MES_567121_2
GE Sukna/8482
Open Tender
Civil Works
Works
270 days
Sukna
AS PER NIT/TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Sukna
₹78,040
Yes
3 Feb 2023
11 Jan 2023
30 Jan 2023
11 Jan 2023
28 Jan 2023
21 Jan 2023
12 Jan 2023 - 25 Jan 2023
Amount
BOQ Part-I (B/R Work)
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
All as per Sl item No. 1.01 above but exc 1.5 m & not exc 3.0 m in depth
Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.
All as per Sl item No. 1.03 above but exc 1.5 m & not exc 3.0 m deep
M&L loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells using broken bricks complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M&L cement concrete 1:2:4 type B0, (using 12.5 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork & demolition complete all as specified and directed.
M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting n.exc. 10 cm in girth complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old asbestos sheets of any descriptions complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in sectio, in any position complete all as specified and directed.
Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
M&L brick work with sub class 'B' brick, in one brick thick honey comb walling, built in CM 1:6 complete all as specified and directed.
M&L brick work with sub class 'B' brick, in one & half brick thick honey comb walling, built in CM 1:4 complete all as specified and directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
All as per Sl item No. 1.26 above but except bricks. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.
M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and as directed. Make :- ICL Concrete Industries / Vaishnodevi Buildcon Private Ltd / Koshi Brick Industries Pvt Ltd / Shankar Oil & Saw Mills
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.
All as per Sl item No. 1.29 above but except bricks. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:6 as in half brick thick wall / drain complete all as specified and directed.
S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 acomplete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 20 mm thick in CM 1:6complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
All as per Sl item No. 1.35 above but in skirting etc. laid over and including screed bed 10 mm thick in CM 1:4.
M&L coloured glazed ceramic tiles 450 x 300 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 20 mm thick screed bed in CM 1:6 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn
M&L 10 mm thick double charged vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 and dismantling complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
All as per Sl item No 1.39 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.
S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete complete all as specified and as dirrected. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Steel Engineers / Sen-Harvic
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L 50 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement including roughening of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth with using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15mm thick in cm 1:6 on brick or concrete surfaces in patch repair n.exc 3 sqm in each patch finished even and fair without using extra cement mixed with WPC as per manufacturers instruction complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. - 10010 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and including connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware, Cat No. - 20042 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)
M & L in repairs flush pipes to pedestal pan, including all joints complete all as specified and directed.
S&F PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware, Cat No.- E8055 or equivalent in Cera(1st quality) / Hindware / Essco
S & F 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed. Make:- Prayag Cat No.- 323-TK or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
S & F of 15 mm bore bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Essco, Cat No. - SQT-512KN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S&F in repairs 15 mm bore bib taps, long body chromium plated, fancy type, cast copper alloy with crutch or butterfly handle and wall flange, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.
S&F in repairs angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed.
S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed.
S&F 150 mm bore salt glazed stone ware (SGSW) drain pipes grade 'A' laid in trenches & jointed in CM 1:1 and tested including demolition complete all as specified and directed.
S&F 200 mm bore RCC pipe Class NP-2 laid in trenches & jointed in CM 1:1 and tested and including demolition complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.complete all as specified and directed.
Dismantling PVC pipes of any dia laid in trenches, wall or floor complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, bore of pipe 150 mm complete all as specified and as directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, bore of pipe 200 mm complete all as specified and as directed.
S&F 2 mm thick plain colour PVC sheet fixed or laid on to flush doors by using rubber based adhesive complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall/ floor complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
All as per Sl item No. 1.74 above but 110 mm bore.
S&F PVC (SWR) 110 mm bore bend with access door, of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F 75 mm bore PVC (SWR) junction double, (double T) equal or unequal complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
All as per Sl item No. 1.79 above but 110 mm bore.
S&F in repairs PVC (SWR) 110 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
M & L in repairs 40 mm PCC designer jafri wall fixed with 1:3 cement mortar complete all as specified and directed.
S&F PVC (SWR) gully trap of 125 / 110 mm, setting and jointing with solvent cement and including top cover complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.
S&F Mild steel screw bolts diameter of neck 16 to 20 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but not exc. 30 cm long complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per Sl item No. 1.88 above but 6 to 8 mm dia.
All as per Sl item No. 1.88 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.
M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs, chullah, chajjas, etc such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
M & L for providing Reinforced cement concrete, 1:2:4, Nominal Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing Reinforced cement concrete 1:2:4, Nominal Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S & F of 200 mm long (Length of bolt) Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S & F of 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, cleaning & re-fixing the same in new or old position in walls / ceiling or in floors etc. complete all as specified and as directed.
All as per Sl item No 2.00 above but 20 mm bore.
S&F15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
All as per Sl item No 2.02 above but 20 mm bore.
S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, thin layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints
M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote)
M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints
M&L preparation of old decorated wall surfaces and including applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)
S&F 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed. Make:- Supreme / M/s Ori-Plast Limited / M/s SHK Polymers
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F in repairs sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420mm bowl size 405 x 355 x 178 mm complete all as specified and directed. Make:- M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s Bluestar Sanitary Industries Pvt Ltd / M/s JMD International (Brand D-sons)
M&L for 18/20 mm thick PVC drawer for kitchen CB including roller and stainless steel bow handle of size 75mm complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F PVC partition for kitchen CB below kitchen platform including 18/20 mm thick PVC flush shutter including piano type hinges & stainless steel bow handle of size 75mm complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited
S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F 150 mm dia flexible aluminium duct pipe chimney exhaust with cowl cover complete all as specified and directed.
S&F soap dish with ABS chromium plated base and polycarbonate holder of dia not less than 110mm,fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - AEC-1131N or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S&F towel rail, 18 mm (minimum) dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- M/s Jaquar & Company Pvt Ltd (Essco), Cat No. - AEC-1111N or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)
S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) door, window and ventilator shutters, sliding type or openable type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodised aluminium fittings etc. complete all as specified and directed. Note : (a) Weight of rubber gasket beading, roller wheels etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measured. (b) Wire mesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries
M&L 20 mm thick granite slab(of any type) tiles machine cut, bedded jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & over & including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F stainless steel 100 mm dia grating, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed. Make :- Prayag/ M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection) / Cera (Med Range)
M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and directed.
Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in sectio, in any position complete all as specified and directed.
BOQ Part-II (E/M Work)
Taking down copper / aluminium concealed point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit, cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down old unseviceable DB/TPN DB any size and any capacity including MCB/RCB/Isolator complete all as specified and as directed.
S&F 9 watt LED bulb, A19 shape with B22 base 230 Volts, frosted diffuser, suitable for surface mounting, complete all as specified and directed. Make:- Crompton / Century Led / C&S
M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Make of cable:- Mescab / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
All as per Sl. item No. 3.05 above but for one 5 / 6 Amps socket outlet point on independent board.
All as per Sl. item No. 3.05 above but for one 16 Amps socket outlet point on independent board with 2.5 sqmm cable and 2.5 sqmm earth wire
M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Mescab / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Make :- L&T / ABB / Legrand / C&S
S&F switch socket combination 3 pin 15 Amp, flush type universal complete all as specified and directed. Make :- ABB/ Anchor / Legrand /C&S
S&F switch socket combination 3 pin 5 Amp, flush type universal complete all as specified and directed. Make :- ABB / Anchor / Legrand /C&S
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- L&T / ABB / Legrand / C&S
S&F LED light fitting 1 x 18 / 20 watt batten type 230 Volts, 4 feet long, extruded polycarbonate housing & extruded polycarbonate diffuser, suitable for surface mounting, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP 20, PF 0.90 (minimum), THD 20% (Maximum), with in-built electrnoic driver with APFC, in-built surge protection 2 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed. Make:- Crompton / C&S/ Century LED ltd
S&F LED light fitting 1 x 10 watt batten type 230 Volts, 2 feet long, extruded polycarbonate housing & extruded polycarbonate diffuser, suitable for surface mounting, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP 20, PF 0.90 (minimum), THD 20% (Maximum), with in-built electrnoic driver with APFC, in-built surge protection 2 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed. Make:- Crompton / C&S / Century LED ltd
S&F MCB SPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / ABB / Legrand / C&S
S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / ABB / Legrand / C&S
S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed. Make :- Anchor / Legrand/ C&S
S&F ceiling fan 1200 mm (minimum) sweep, BEE 2 star (minimum) rated AC single phase 230 V, 340 RPM (minimum), suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed. Make :- Crompton/Bajaj/ Orient / Ram Ratna Electricals Ltd (RRE)
S&F exhaust fan 300 mm sweep, metal body, 1200 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Make :- Crompton/Bajaj/ Orient / Ram Ratna Electricals Ltd (RRE)
S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, with 200A copper neutral and earth bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed. Make :- L&T / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)
Supply & laying LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 2 core, laid in trenches / duct / on pole complete all as specified and directed. Make :- KEI / MESCAB / Polycab/ Phinolex
S&F 9 watt LED bulb, inverter (backup) type, A19 shape with B22 base 230 Volts, battery with minimum 4 hrs backup time, frosted diffuser, suitable for surface mounting, total system lumen 900 Lm (minimum) on supply and 400 Lm (minimum) on battery, colour temperature 6500K (minimum), CRI 80 (minimum) complete all as specified and directed. Make:- Crompton / Century Led / C&S
S&F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings including taking down complete all as specified and as directed. Make :- HPL / Anchor / Legrand/C&S
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.
S&F porcelain vitreous white insulator, fixed on wall/ roof/ block with galvabised iron nuts, bolts and washers for separating the aluminium or GI earthing strips/ sire on wall/ roof / block complete all as specified and directed.
S&F LED street / security light fitting 1 x 20 watt, integrated type with high efficiency electronic driver, pressure die cast aluminium housing & PC diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 70 (minimum), IP-65 (minimum), PF 0.90 (minimum), THD 10% (Maximum), in-built surge protection 5 KV (minimum) internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable & all other necessary fixing accessories such as GI pipe light grade of 40 mm bore (or higher size as per manufacturer recommendation) & suitable length with MS flat iron clamps (clamps shall be 40 x 5 mm MS flat), nuts, bolts & washers including painting to GI pipe & clamps with two coat of aluminium paint over a coat of red oxide primer complete all as specified & directed. Make:- Crompton / HPL Century LED ltd
Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.
M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.
S D CONSTRUCTION CO
R K UDYOG
MS ORIENT ENGINEERING WORKS
M/S B B CONSTRUCTION
R N SAH N CO
Embee associates
PS ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .