Telecom work in connection with "Rolling in/out examination with huts with all facilities at 06 stations over Sealdah Division".

BEEN SHOWN IN ITEM BREAKUP SEPARATELY.

NON-SCHEDULE/SOR ITEM vide SL. NO. 1 to 54 GIVEN IN SCHEDULE OF WORK. GST HAS BEEN

SHOWN IN ITEM BREAKUP SEPARATELY.

S No. Item Description of Item Unit Qty Rate Amount

1 1 "Supply, Installation, Testing and Numbers 73.00 10484.30 765353.90

commissioning of Full HD bullet type IP

colour camera along with 128 GB

SD/SDHC/SDXC Memory cardor higher as

edge storage including fixing of CCTV on pole

/ structure with housing canopy, mounting

bracket, waterproof protection arrangement

and all accessories required for outdoor

installation purposes as per RDSO spec No

RDSO/SPN/TC/65/2021, Ver 6.0 amendment

3.0 or latest. Inspection: RDSO "

SEALDAH DIVISION-S AND T/EASTERN RLY

2 2 Supply, Installation, Testing and Numbers 8.00 26375.42 211003.36

commissioning of 16 Channel Network Video

Recorder (NVR) along with all required

accessories required for installation

purposes, technical spec. as per annexure A.

Make: Hikvision/CP-Plus or better. Inspection:

3 3 Supply & installation of 10TB Surveillance Numbers 8.00 28389.83 227118.64

Hard Disk used for Network Video Recorder

(NVR) as per RDSO spec No

RDSO/SPN/TC/65/2021, Ver 6.0 amendment

3.0 or latest. Make: Toshiba/WD/Seagate or

better. Inspection:RDSO

4 4 Supply, Installation, Testing and Numbers 8.00 58913.07 471304.56

Commissioning of 55-inch Full HD Large

Format Display Monitor as per

RDSO/SPN/TC/65/2021 Ver.6.0 Amndt. 3 or

latest Includes Supply & fixing of Standard

OEM Mounting kit along with all the

accessories along with interface cables of

sufficient length for connecting to the PC

Work Station or NMS.Make: LG/Samsung or

better. Inspection:Consignee

5 5 Supply, Installation, Testing and Numbers 8.00 178176.63 1425413.04

commissioning of PC Workstation for

viewing, monitoring and system

management including 24"(Inch) 4K UHD

LED monitor with mouse and keyboard, pre

installed MS oce, antivirus with 3 years

security protection (licensed genuine

software), with 600 VA UPS.This also includes

supply and installation of Graphical User

Interface based Client Software (per

workstation basis) as per RDSO spec. No:

RDSO/SPN/TC/65/2021 Revision 6.0 Amndt. 3

or latest. Inspection:RDSO

6 6 Supply, Installation, Testing and Numbers 32.00 18085.36 578731.52

commissioning of Field Switch with Minimum

8+2 Port Manageable having 8 Nos

10/100/1000 Mbps Base-T POE & 2 Nos 1G

SFP optical Port with loaded SFP module with

all accessories as per RDSO/SPN/TC/65/2021

Version 6.0 with Amendment No. 3 or latest.

Make- Cisco/HP/D-link or better. Inspection:

7 7 "Supply of Gigabit Ethernet Media Converter Pair 50.00 5197.00 259850.00

Single-Mode as per RDSO/ SPN/TC/103/2013

Rev.2 or latest with latest amdt.

Make:Digisol/TP Link or better. Inspection:

Waterproof/Dustproof/Rainproof 8 " (inch)

Heavy Duty Metal Bullet Camera Mounting

Enclosure for Outdoor Purpose with Side

Locking System and Wall Mounting

Bracket/Stand. Inspection: Consignee

concrete base (Mix in ratio 1:1.5:3) , size

approx. 600 x 600 mm, including PCC bed,

shuttering, curing, and finishing with slope

for water drainage. include supply and fixing

of a 1.0-meter long Galvanized Iron (GI) Pole

of diameter 75mm, including necessary base

and top plates, J-bolts with all accessories

required for mounting and alignment of CCTV

camera. Note: All the required material will

be suppiled by the Firm.

SEALDAH DIVISION-S AND T/EASTERN RLY

10 10 "Supply of half size apparatus case (As per Numbers 24.00 6661.02 159864.48

RDSO drawing No. RDSO/S-11507). This

includes supply of location box (GKP type)

with 'E' type lock & key, fitted on location

door on both side, E Type lock (ward No will

be specified by Engineer-in Charge) as per

RDSO Drg. No. SA 3376 and Key to Drg. No.

3377 as per RDSO drawing No. RDSO/S-

11507. Inspection: Consignee "

11 11 "Casting, concreting and curing of concrete Numbers 24.00 2631.36 63152.64

foundation (in ratio 1:3:6), erection and

installation of half apparatus case enclosure

on CC foundation. This includes cost of all

materials required for fixing holding down

bolts, casting, concreting. Note: - bolts, nuts

and washers, bitumen compound to be

supplied by contractor and bitumen

compound to be used in between apparatus

case and foundation as per site engineer.

This also includes bottom of apparatus cases

filled with sand and the outside covered with

masonry work and neat cement plastering. "

12 12 Painting of two coats of synthetic enamel Numbers 24.00 200.00 4800.00

paint over one coat of primer on the

following after scraping & cleaning surface

wherever necessary with contractor's own

supply of paints and primer. Note: The paint

and primer should be from Asian

Paints/Nerolac/Dulux/Berger. The

primer/enamel paints(Aluminiun synthetic,

black enamel, brilliant white and yellow) will

be as per (IS 5660 of 1970)/(IS 2932 of 1974

or latest) of Apparatus case Half size.

(Outside and Inside).

13 13 Fixing of slotted angle and fixing of datacom Numbers 24.00 1271.19 30508.56

equipments inside the location box with all

required fitting arrangements and hylam

sheet and termination/installation of

Switchpower/telecom cables inside the

location box including supply of slotted

angles, hylam sheet wires ferrules for

marking and miscellaneous materials per

location to be supplied by contractor.

14 14 "Supply of Earth electrode mild steel Numbers 24.00 1267.80 30427.20

galvanized, light class, IS:1239(PART-I)-

1979.earth electrode pipe should be with 3

mm thick, 50 mm dia and

perforated(staggered),5 mm dia holes, 2 nos

per 305 mm length. Earth pipe should

include CI threaded cap. Materials to be

procured and designed as per PCSTE/ER's

Drg No. SI/TYP/ 0097 dated 25.03.25 or latest

Inspection: Consignee"

15 15 Supply of MS FLAT (SPEC. NO. 226 STD or Numbers 24.00 772.03 18528.72

latest) of size 35 mm x 6 mm with length 5

mtr with holes of 12 mm dia at both ends as

per PCSTE/ER'S DRG. NO. SI/TYP/0097 dated

25.03.2025 (or latest). Note: (The MS flat

with holes may be supplied in equivalent

length in mtrs or as per site requirement)

Inspection : Consignee.

SEALDAH DIVISION-S AND T/EASTERN RLY

16 16 Fixing of earth electrode including laying and Numbers 24.00 983.90 23613.60

installation of MS flat of size 35 mm x 6 mm

with length 5 mtr or as per extant practice of

Eastern Railway. As per PCSTE/ER'S DRG. NO.

SI/TYP/0097 dated 25.03.2025 or latest. for

apparatus cases, signal post & other

equipment as per instruction of site

engineer. Provision for fixing MS flat at

apparatus cases/ signal post/other

equipment should be made by the firm at

site. Where required necessary holes to be

drilled on the MS Flat . Full threaded bolts of

10 mm dia and length 40 mm should be

welded in the apparatus cases in such way

that the MS flat at apparatus case end can be

fixed from outside or from inside (bolts of 10

mm dia and length 40 mm should be

supplied by the contructor). Welding

arrangement with accessories and welding

materials should be arranged by the

contractor for fixing of bolts at equipment

end where required as per instruction of site

engineer. All hardware and other

miscellaneous materials required for

installation to be supplied by the contractor

except earth electrodes and MS flat. Sig.

Cable as provided by Railway is also to be

laid and terminated on Earth Electrode and

to GI Wire/GI Flat in Location Box.

17 17 Supply of cement concrete enclosure for Numbers 24.00 483.90 11613.60

earth electrodes as per Drg No. S&T/C-

36(NKG) & PCSTE/ER'S DRG. NO. SI/TYP/0097

dated 25.03.2025 or latest. Inspection:

18 18 "Supply of wall mount 9U Rack Enclosures Numbers 8.00 7239.02 57912.16

Networking/Server Rack with power strip 5A

socket 06 no. & MCB, Depth of the Rack:

Upto 500mm,Transparent Toughened Glass

used in front door, CRCA Steel rear door, with

Secure Locks, Support cable entry from top

or bottom, with fan tray and Min. two nos.

fans. Make: Valrack/Dyanamic Rack /D-Link

or better Inspection: Consignee. "

19 19 Installation of 9U/6U/4U rack with necessary Numbers 8.00 469.54 3756.32

angles, fasteners and other fixing

20 20 "Supply of 6 Fibre armoured underground Kilometre 7.00 35294.92 247064.44

Optic fibre cable, conforming to TEC Spec.No.

GR/OFC02/03.SEP.2003 or Latest.

Make:Finolex/POlycab/D-Link or better

Inspection: Consignee"

21 21 Supply of 40 mm dia permanently lubricated Kilometre 7.00 53277.12 372939.84

HDPE telecom: ducts (with chord) as per

RDSO SPEC.NO. RDSO/SPN/TC/45/2013

REVISION 2.0 with latest amendments or

Latest in length of 1000 mtrs/roll For each

km. Of HDPE duct following items are to be

supplied (a) end plugs-2 nos. (b) cable

sealing plugs - 2 nos. (c) plastic couplers slip

fit/push fit type-2 nos. (d) end plugs to be

provided along with drum 2 nos. (Note: The

color of duct will be as per Technical circular

-124A(modified). The colour of the duct is to

be confirmed by the in-charge of the work

before supply) Inspection: Consignee

SEALDAH DIVISION-S AND T/EASTERN RLY

22 22 Laying of HDPE pipe duct, 40/33 mm in Kilometre 7.00 20961.02 146727.14

trenches/overhead and protective works

including pulling of mono-mode armoured

OFC cable through duct in trenches and as

advised by site engineer. Note:- (1) the

contractor will take over the OFC cable from

railway store to site of work duly checked the

continuity of each fibre from end to end . (2)

before & after laying of optical fibre cable

through duct, continuity test from end to end

of each fibre to be made by the contractor to

ensure availability of all duly certified by the

site engineer. Note: OFC & HDPE Duct will be

provided by railway.

23 23 "Supply, installation and Splicing, Numbers 4.00 6497.60 25990.40

termination of 6 fiber OFC with Joining kit

(Splice Closure) as per TEC/GR/TX/OJC-

002/03/APR-2010 or latest and termination

tray with provision of taking out OFC as

required.This includes supply of all

installation accessories including the pigtails

with connector. OFC Jointing kit will be

supplied by the contractor. Inspection:

24 24 Supply of Rack mounting type 06 port Fiber Numbers 32.00 4200.00 134400.00

Distribution Management System (FDMS)

Single Mode, Simplex Fiber Optic Patch

Panels,19 inch 1 U Rack Mountable with

SC/LC connector or as per site requirement

with all accessories including Consumables

Kit Make:/Comscope/Digisol or better

Inspection: Consignee.

25 25 Installation of LIU/FDMS in equipment rack Numbers 32.00 298.53 9552.96

with all accessories as per site condition.

26 26 Splicing /Dropping/Termination of each Fiber CORE 350.00 44.83 15690.50

/Pigtail in the LIU/FDMS/Termination Joints

through fusion Splicing of the termination of

OFC Cables, as per the instructions of

Railway site engineer.

27 27 "Supply of single Mode Armored Optical fiber Numbers 120.00 900.00 108000.00

Patch Cord length 3 meters (LC -SC/SC -

SC/LC-LC/FC-LC) or as per requirenment of

s i t e . Technical Specification: Armoured

(Constructed with a helical stainless steel

spiral over a buffered fiber surrounded by a

layer of aramid and stainless steel mesh with

a heavy duty LSZH outer jacket), 9/125

Micron. Insertion Loss: MAX 0.3 db/Km over

range 1310 nm and 1550 nm Temperature

Range: -10 Degree C to +60 Degree C, RoHS

compliant, Rodent and water proof. Make:

Iveonet/Relemac or better, Inspection :

28 28 "Supply of STP CAT-6 data cable as per Metre 3000.00 38.39 115170.00

EIA/TIA- 568-B.2-1 or latest Make: D-

Link/Digisol or better. Inspection: Consignee."

multi strand (50/0.25 mm dia) cable as per IS

694:1990 reaffirmed 1995 or lates. Make:

Polycab/Finolex/Havells or better Inspection:

30 30 Laying/Blowing of Power Cable/OFC/STP CAT- Metre 4000.00 16.10 64400.00

6/Switch Board Cable/speaker cable/Earth

Cable etc. through PVC Conduit Pipe/ GI

Pipe/HDPE Pipe/PVC trunking etc. as per

direction of the Rly. Representative, This also

includes transportation of cable, PVC Pipe, GI

Pipe,HDPE Pipe etc. to the site. Cable will be

supplied by Railways.

SEALDAH DIVISION-S AND T/EASTERN RLY

31 31 Supply of conduit pipe of size 25mm dia 2 Metre 800.00 24.80 19840.00

mm thickness and 3 mtrs standard length or

as per requirement with ISI mark conforming

to IS:9537 Part-3 or latest Make:

Supreme/Polycab/Jindal/Garware or

Superior.Inspection : Consignee.

32 32 Laying & Fixing of PVC conduit pipe/flexible Metre 900.00 5.27 4743.00

PVC Pipe on wall, bridges, platformshed

complete with 'U' clamps and necessary

fixture screws etc. as per route given by site

engineer of Railways. Note- PVC pipe

supplied by railway.

33 33 Supply of rolled flexible PVC Pipe of 25mm Metre 100.00 24.25 2425.00

dia with ISI mark. Inspection:Consignee

34 34 "Supply of Medium class GI pipes 50 mm dia Metre 1200.00 342.37 410844.00

(3.6 mm thickness) as per IS 1239 (Part 1):

2004 or Latest. Inspection: Consignee "

35 35 "Supply of 'ELBOW'- BENDS to suit GI pipes Numbers 40.00 90.00 3600.00

50 mm dia (3.6 mm thickness) Inspection:

36 36 Laying & Fixing of Medium class GI pipes Metre 1200.00 83.05 99660.00

50/100 mm dia (4.5 mm thickness) &

'ELBOW'- BENDS to suit GI pipes 50 mm dia

(3.6 mm thickness) as per IS 1239 (Part 1):

2004 with socket & coupling on culverts

bridges or at any other locations as decided

by Site Engineer. It includes installation of all

material required for fixing arrangement.

Contractor will install flexible/corrugated

HDPE pipe at the end of GI pipe along with

any masonry work (if required) to protect the

cables from sharp edges and sudden bends.

GI pipe, HDPE & ELBOW'- BENDS will be

provided by railway.

37 37 "Supply of CAT-6 UTP RJ-45 patch cord (5mtr Numbers 200.00 217.28 43456.00

long) twisted stranded cable terminated with

RJ45 modular plugs at both the ends. TIA/EIA-

568-C.2 standard or latest, Insulation

Material : High Density Polyethylene, Outer

Jacket: FR-PVC, Conductor diameter: 23 to 26

AWG, Conductor Metal : Bare Copper, Make

D-Link or better Inspection: Consignee. "

38 38 "Supply of CAT-6 UTP RJ-45 patch cord (3 mtr Numbers 200.00 197.18 39436.00

long) twisted stranded cable terminated with

RJ45 modular plugs at both the ends. TIA/EIA-

568-C.2 standard or latest, Insulation

Material : High Density Polyethylene, Outer

Jacket: FR-PVC, Conductor diameter: 23 to 26

AWG, Conductor Metal : Bare Copper, Make

D-Link or better Inspection: Consignee. "

39 39 Supply of passthrough RJ-45 Connectors Numbers 1000.00 6.66 6660.00

suitable for STP cables, confirming to IS

1293:2019 or latest.Make:-DLink/Digisol or

better Inspection: Consignee.

40 40 Supply of frame, surface box and white cover Numbers 10.00 484.75 4847.50

plates for Two modules. This also includes

supply of RJ-11 Telephone sockets with level

holder Jack type, RJ-45 LAN sockets Jack Type

(Tool less) and blanking plates for one

modules. Make: Legrand or better.

Inspection: Consignee

41 41 Fixing of frame, surface box and white cover Numbers 10.00 121.19 1211.90

plates for Two modules. This also includes

fixing of RJ-11 Telephone sockets with level

holder Jack type, RJ-45 LAN sockets Jack Type

(Tool less) and blanking plates for one

modules. Make: Legrand or better

SEALDAH DIVISION-S AND T/EASTERN RLY

42 42 Supply of HDMI CABLE ( 1.5 METER ) . Make- Numbers 16.00 362.60 5801.60

Honeywell/ZEBRONICS/MX or better.

Inspection:Consignee.

43 43 Supply of HDMI CABLE ( 10 METERS ) Make- Numbers 16.00 1568.00 25088.00

Honeywell/ZEBRONICS/MX or better.

Inspection:Consignee.

44 44 Excavation of cable trench as per cable route cum 1400.00 232.20 325080.00

plan, 1.2 Mtr. deep and of 0.3 Mtr. wide at

bottom as per RDSO sketch No. SDO/CABLE

LAYING/003 or latest alongside the track in

normal (all type) soil/strata, conforming to

distances as per cable route plan and

refilling. This work includes clearing of route

from bushes etc, covering of cable laid in

trench by loose soil for a layer of 50mm

thickness approximately before covering by

bricks(Bricks will be provided by contractor).

The work shall be done as per the extant

practice on Eastern Railway and instructions

of Railway Engineer at site. Note:-(a)for all

trenches from distant signal to home signal

and to relay room, the minimum headway

above the uppermost cable in the trench

should be 600mm. If due to a large no. Of

cables headway is not available, 4" of 1:2:4

concreting should be done.

45 45 Digging of cable trench 0.3 Mtrs. Deep and cum 270.00 421.19 113721.30

0.3 Mtrs. Wide on Platform / Road / Hard

rocky area. Refilling with earth leveling of

trenches & restoring the original surface of

trenches. The sharp edges will be

smoothened out in bottom of the chase and

will be leveled properly. In hard rocky ground

area , cables will be laid normally on layer of

shifted earth of 0.05 mtrs thickness

previously deposited at bottom of the trench

and cables will be covered with layer of sand

or shifted earth of 0.1 mtr thickness. In case

sharp edges of rocky ground cannot be

protected from shifted earth then GI/ CI /PVC

/DWC/ HDPE pipes will be used, if numbers of

cables is small. In case number of cables are

large RCC duct will be used. In isolated

cases, it can be given smooth surface by

using either masonry bricks or cement

concrete. A row of bricks shall then be placed

length wise on the top and jointed with

cement mortar and layer of concrete with

cement plaster shall be provided on top of

the same.Note: This item in hard rocky area

will be operated only where normal depth

i.e.1.2 mtr is not possible and it will be

decided by site engineer/unit officer incharge

46 46 Digging of trench 1.2 Mtrs. deep from rail cum 180.00 235.59 42406.20

flange/ road level and 0.3 Mtrs wide and back

filling after placing of DWC/ RCC/GI pipe.

(Placing of DWC/RCC/GI pipe covered

separately). The ballast disturbed be

screened and dressed as required by

Engineer-in-charge or his representatives and

road tarred immediately. For track crossing,

RDSO sketch No. SDO/CABLE LAYING/009 or

latest and for Road Crossing, RDSO sketch

No. SDO/CABLE LAYING/010 or latest are to

SEALDAH DIVISION-S AND T/EASTERN RLY

47 47 Mechanised drilling/microtunnelling under Metre 500.00 1489.83 744915.00

important/busy metal / concrete road/railway

track with supply & laying of G I pipe and

pulling of cable through GI pipe . This

includes re instatement of the surface to the

original state.As per Site requirement.G.I.

Pipe as per latest IS Spec.

48 48 Cutting the masonry wall at locations Metre 200.00 50.00 10000.00

indicated by Rly.site engineer and repairing

of wall in original state by cement/tiles/white

washing/painting after laying of cable/PVC

etc as per instruction of Rly. site Engineer. All

required materials for this purpose to be

supplied by contractor.

49 49 "Supply and Installation of 1KVA Online UPS Numbers 8.00 25000.00 200000.00

with min. 30 minute backup full load

condition along in with 03 Nos. 12v/26Ah

external battery (Quanta/Exide OR Better)

with terminal, battery rack & accessories set.

Make: Microtek/Numeric/Emerson (Vertiv)/

APC or Better Inspection: Consignee. "

50 50 Supply of Passthrough Crimping tool, Modular Numbers 2.00 734.93 1469.86

Plugs 8P8C RJ-45, 6P6C RJ-12 and 4P4C RJ-11,

7.5 inch steel construction body, All-steel

handles (with padding), Suitable for 22-26

AWG wires, Built-in cable stripper with stop

to ensure correct strip length continuity

tester. Inspection:Consignee

51 51 Supply of Digital Cable network tester (LAN Numbers 4.00 510.40 2041.60

Tester) to Check RJ11, RJ45 and BNC

connectors, Full LED indication lights on both

main and remote unit, to Verify continuity,

opens, shorted or cross wire paired, Indicator

LED Lights, Power 9V Alkaline Battery,

Electricity : 25mA , make: Dlink or better.

Inspection: Consignee

Reflectometer (OTDR), operating at 1550 nm

and 1310 nm for working on single mode

optical fibre as per TEC spec. TEC/GR/TX/OTD

- 001/05/SEP-19 or latest, of reputed make

like Yokogawa/JDSU/Viavi or better.

Consignee shall approve the supply only after

successful demonstration at site. Inspection:

53 53 Supply of Automatic Fusion Splicer for single Numbers 3.00 418313.56 1254940.68

mode Optical fibre cable, along with all

accessories as per TEC spec. TEC/GR/TX/OSM

- 001/04/SEP-12 or latest. Make

Superior/Fujikura or better. Consignee shall

approve the supply only after successful

demonstration at site. Inspection: RITES

54 54 Supply of optical power meter with Visual Numbers 4.00 13994.48 55977.92

Fault Locator, as per TEC spec. GR/OPM-

01/03 Feb 2005 or latest. With SC to LC

Adapter, Charging cable & all required

accessories. Inspection: Consignee. Note-

Item to be supplied after successful

demonstration and Approval of Railway.