CANOPY FALSE CEILING WORK UNDER SCZ

FC REMOVAL - AP — MOVAL OF FALSE CEILING

REMOVAL OF ROOFING — MOVAL AND STACKING OF THE EXISTING CANOPY ROOFING MATERIAL AND ROOFING SYSTEM AND STACKING THE REMOVED ROOFINGMATERIAL MATERIAL AT NOBJECTIONABLE PLACE AT THE RETAIL OUTLET AS DIRECTED BY THE EIC AND THE CONSULTANT. THE MATERIALREMOVED FROM THE EXISTING CANOPY BE STACK PROPERLY WITH INDEXING THE MATERIAL GOOD FOR INSPECTION. REMOVAL OFROOFING CANOPY,STACKING

DISMAN OF EXISTING — SMANTLING AND REMOVING OF EXISTING GUTTERS. CARE SHOULD BE TAKEN FOR NOT DAMAGING THE EXISTING SHEETS AND STRUCTURE.REMOVING AND S FTING OF THE REMOVED MATERIAL AS PER INSTRUCTION OF ENGINEER-IN-CHARGE. DISMAN OF EXISTING GUTTERREMOVING

REMOVAL OF FASCIA — SCIA REMOVAL AT HEIGHT OF 6 METER ABOVE: REMOVAL FASCIA MATERIAL FROM THE EXISTING PORTA CABIN, JOB INCLUDING THEREMOVAL AND CLEAN G AND ENAMEL PAINTING OF THE FASCIA SHEET MATERIAL, LEVELING IF NECESSARY AND FIXING WITH NEW BOLT ANDNUT AS SPECIFIED. REMOVAL OF ASCIA MATERIAL

S/F OF GUTTER — OVIDING AND FIXING 20G ALUMINIUM GUTTER SUITABLY BENT WITH PROPER OVERLAPS, SEALANT, REVET, SCAFFOLDING, LABOUR,TRANSPORTATION, ET COMPLETE. SPLY AND FIXG OF GUTTER AL,SCAFFOLDING

S/I OF NEW ROOFING RIBBED- APLP-CVR PURCHASE PLANT — OVIDING AND INSTALLING ROOFING RIBBED ROOFING SYSTEM MANUFACTURED WITH HIGH STRENGTH STEEL GRADE OF G550(550MPA) OFHPCL APPROVED B E GALVALUME HIGH TENSILE COLD ROLLED STEEL AS PER ASTM 117 A792M/AS 1397 COATING CLASS AZM 150 (MINIMUM150 GM/SQM ZINC-ALUMINUM AL Y COATING MASS TOTAL OF BOTH SIDES), OF YIELD STRENGTH 550 MPA THICKNESS OF BARE METAL (BCT):0.40MM,TOTAL COATED THICKNESS(TCT) : 45 MM .APPROXIMATE MASS OF ROOFING SHEET SHALL BE 4.17 KG/SQM. PANELS SHALL BE OF MIN.900 MM WIDE AND MIN. CORRUGATION DEPTH OF 38 M WITH VARYING LENGTHS AS PER SITE REQUIREMENTS RATE SHALL BE INCLUDINGLAYING OF SHEETS WITH APPROVED FASTENERS AND ALSO ALL WEATH SEALANT TAPE AS PER MFR''S RECOMMENDATIONS ANDALSO PROVIDING RIBBED GALVALUEME RIDGE PIECES OF THE SAME CLASS AS OF THE ATCHING CORRUGATION PROFILE OF THE ROOFINGSYSTEM AS RECOMMENDED BY THE MFR.AND, HORIZONTAL/VERTICAL FLASHING NEAR ILLUMINATED BAND G . SPLY AND INSTLN OF ROOFINGRIBBED

S/I - FASCIA GI,THK:20 — PPLYING AND FIXING 20 SWG GI SHEET FACIA INCLUDING PAINTING WITH ONE COAT OF ZINC CHROMATE PRIMER AND TWO COATS OF 1STQUALITY SYNTHE C ENAMEL PAINT ON FRONT SIDE . NECESSARY FACIA FRAMEWORK FOR FASTENING THE SHEET TO THE CANOPYSECURELY SHALL BE PAID SEPARATELY.

S/F OF NEW FALSE CEILING- — PPLY AND FIXING OF NEW FALSE CEILING

PAINTING OF CANOPY — INTING OF CANOPY, CLEANING OF THE CANOPY FASCIA AND FALSE CEILING SURFACE TO REMOVE ANY OBSERVED RUST AND PROVIDINGAND APPLYING 2 ATS OF SYNTHETIC ENAMEL PAINT 1ST QUALITY OF APPROVED MANUFACTURER AND SHADES ON THE SURFACE TO GIVEAN EVEN SHADE AFTER TWO COATS RED OXIDE PRIMER AS PER IS-712 LATEST REVISION. THE COLOUR SCHEME SHALL BE AS PERSTANDARD HPCL COLOUR CODING. PAINTING OF CANOPY AT:2, UOM is EACH is SQ.M

S/I/F STREET LIGHT LED -AP — INSTALL SUPPLIED LED FIXTURE OF CANOPY OR YARD LIGHT AT RETAIL OUTLETS OR OTHER PREMISES AS DECIDED BY HPCL. WORKINCLUDES PICKING P OF FIXTURES, ACCESSORIES, CUT OUTS, CONTROLLERS ETC. FROM REGIONAL OFFICE, TRANSPORTING, STOCKING ATRETAIL OUTLETS. COST TO INCL E INSTALLATION OF FIXTURE AS PER MANUFACTURER RECOMMENDATION, WITH CHAIN OR GI WIREHOLDING STRAPS, ACCESSORIES, MATERIAL, LABOR ET . VENDOR TO FOLLOW INSTRUCTIONS OF EIC FOR DECIDING THE LOCATION OFFIXTURE. CABLE, GLANDS WILL BE PAID EXTRA IF PROVIDED BY VENDOR