Construction of Badminton Court and Volleyball court and laying EPDM Flooring (Synthetic Track) on existing cement concrete footpath for jogging/walking including maintenance, cleaning and washing for a period of 5 Years in Stadium near Govt School

Providing and Fixing LED 50 Watt street light with pole foundation wire switch and all accessories complete at site.

Providing and laying 15mm thick synthetic jogging track EPDM (9mm SBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM Colour Granules top layer) of approved make COLORSPACE F/COLORPLAY/BSG/NOVAL with test reports of certified NABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDM Granules shall have following minimum properties 00 Polymer content )22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) Tensile Strength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as per ASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UV rating of 3-5 on grayscale, (vi) VOC less than 3.0.0 ww/1 [viii] Combustibility less than40 mm /m: (ix) Anti-Microbial and Anti-Fungal Tested material, and shall be laid in three layers.[1] First step shall be the application of single component Polyurethane based primer coating Layer: PU binder shall have a specific gravity of 1.05 the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes 2. The second layer shall be an impact attenuating cushion layer of 9mm thick black crumb rubber/SBR adhered with a polyurethane binder and PU binder shall have a specific gravity of 1.05: the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes of to form a resilient porous layer. Crumb rubber /SBR shall be mixed with a minimum of 14% -16% of single-component PU base binder so as to ensure that PU binder provides 100% coating of the SBR/crumb rubber particles. The third step shall be laying a 6mm EPDM GRANULES top layer with at minimum 18% binder of single component polyurethane and shall provide 100% coating of the EPDM granules particles Design on the base top layer by a specialized team of installers according to the specification of approved material and shade. The detailed technical specifications of EPDM flooring material properties, application procedure, testing. etc. are attached herewith for compliance. The documentary evidence has to be produced. for the procurement of material for the manufacturer`s test certificate. An undertaking is to be furnished by the agency that surface system is tested EN 1177 For shock absorption report of SPORTS LAB approved by IAAF WORLD Athletics’ company has not been blacklisted by lAAF/Sports Authority of India/ World Athletics’IAAF means earlier `international Association of Athletics Federations or World Athletics now. The work shall be carried out by the manufacturer`s approved applicator and the prospective bidder should produce a letter from the approved manufacturer prior to submission of bid and strictly to the technical specifications and satisfaction of the engineer-in-charge. Area (sqft)=40ft×30ft=1200sqft Volume=100.33sqm

-Movable Badminton Pole Pair, Made of 48X48 mm square pipe, Base Pipe 6inch square , Weight 45 kg each side, adjustive Rachid with net 32 x 15 x 15 Centimeters, fine quality PU painted.

-Supply and Erection of LED flood light 120 Watt fitting made up of pressure die cast aluminium housing with dual optics of PC lens of each LED and front glass cover with high power LED’s, IP 66,IK07 protection 4 -10 KV SPD efficiency 110 - 120 LPW, Complete in all respect up to the entire satisfaction Engineer-in-Charge. Make: - Crompton, Phillips, Havells, Surya and Bajaj.

-Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge

-Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 25sq.mm 4Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 16sq.mm 4Core

-Analysis of Rate for Sport floor-Flex Court System-8 Layers, Over the Asphalt Surface

Lawn Bolly boll Movable PairMovable Pole with Net120-140kg Weight can be filledMade of steel Net string should be Synthetic, wire diameter 2-3mm, Length 12.8mMake : Metco or equivalentItem Code: Metco-8153

Supply and Installation of 30M Hot Dip, galvanized inside and outside in Single Dip, suitable for wind velocity as per IS 875 Part-3 Three Section Hot Dip Galvanized Pole Size Bottom 410MM and Top 150MM, Plate Thickness 5/4/3. Base Plate 640X20MM with PCD 640MM, with three Section 10.5 Mtr. with Motorized System With Gear Box and All Accessories