Preventive and Corrective Maintenance works for EHT, HT and LT switchgears and miscellaneous works at Sub Stations, BARC, Trombay, Mumbai 400085.

Amount

110 kV Receiving Station

22 kV switchgear : Inspection, maintenance and testing of 22kV switchgear panel type 8BK80 of M/s. Siemens make consisting of 2000A, 3AF type vacuum circuit breakers for 2Nos. Incomers 1No. Bus-coupler & 5Nos. outgoing feeders with bus sections P.Ts C.Ts cable boxes control wiring etc. as per clause No.1 of specification. (Total =8Panels + 1Adopter Panel)

11 kV Switchgear : Inspection, maintenance and testing of 11kV switchgear panel type HWX of M/s AREVA make consisting of 1600A Vacuum circuit breaker for 2Nos. Incomers, 1No. Bus-coupler & 22Nos. outgoing feeders with bus sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. No. 2 of specification. (Total= 25Panels + 1Adopter Panel)

415 V switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s L&T make consisting of air circuit breakers for 3Nos, 2500 A Incomers, 3Nos, 2500A bus-coupler and 24Nos. 1000A outgoing feeders in two tier with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 3 of specification. ( Total = 18Panels) Measurement of Insulation Resistance values of 3 Nos. Sandwich type Bus-ducts is also to be included in this.

415 V Bus ducts (For 2 MVA transformer) : Inspection maintenance and testing of 3200A, 500V, AC3 phase & neutral copper /aluminium bus bars enclosed in a MS bus duct from transformers to LT panel partially indoor and partially outdoor as per clause No. 4 of specification. (Approx. length 13Mtr each)

110kV Switchyard Equipments Item No 1.6 to 1.8 as per Clause No. 6 of specification

110kV Switchyard at North Site, BARC : Inspection and cleaning of insulators, checking of control wiring etc. of 110kV switchyard equipments of both lines such as lightning arresters, line insulators, bus post insulators, PTs, CTs, isolators, SF6 CBs, earthing etc.as per Clause No. 6.1 of specification.(consisting of both Lines)

110kV terminal yard at South Site, BARC : Inspection and cleaning of insulators of 110kV switchyard equipments of both lines such as lightning arresters, cable termination post, bus post, earthing etc. as per Clause No.6.2 of specification. (consisting of both Lines)

Monsoon protection of control box / Marshalling Box of 110kV outdoor switchyard equipments such as LA, PTs, CTs, isolators, SF6 CBs etc. as per Clause No. 6.3 of Specification

415V , MCCB, Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 400A MCCB, PCC Panel having 1No. Incomers of 400A MCCB & 6 Nos. of 250A/160A/100A MCCB outgoing feeders for light and power distribution at various places as per clause No. 5 of specification. ( Total =2Panels)

415V, SFU, Emergency Power Control Centre (EPCC) : Inspection, maintenance and testing of 415V, 250A SFU, PCC Panel having 2Nos. Incomer of 250A SFU and 10Nos. of SFU feeders for light and power distribution at various place as per clause No. 5 of specification.

22 kV Main Sub-Station

22 kV switchgear : Inspection, maintenance and testing of 22kV switchgear panel type 8BK20 of M/s Siemens make consisting of 1250A, 3AF type vacuum circuit breakers for 2Nos. Incomers 1No. Bus-Coupler & 7Nos. outgoing feeders with bus sections P.Ts C.Ts cable boxes control wiring etc. as per clause No.1 of specification (Total=10Panels+1Adopter Panel)

11 kV switchgear (Main) : Inspection, maintenance and testing of 11kV switchgear panel type 8BK88 of M/s. Siemens make consisting of 1250A, 3AH5 type vacuum circuit breakers for 2Nos. Incomers, 1No. Bus-coupler & 11Nos outgoing feeders with bus sections P.Ts, C.Ts cable boxes control wiring etc. as per clause No.2 of specification & 11kV switchgear panel type 8BK80 of Siemens make consisting of 1250A, 3AH3 type VCB for 3Nos. Incomers, 6Nos. outgoing feeders & 2Nos adopter panel. as per clause No.2 of specification (Total=23Panels + 5Adopter Panel)

11 kV switchgear (Capacitor) : Inspection, maintenance and testing of 11kV switchgear panel type 8BK80 of M/s. Siemens make consisting of 1250A, 3AF type vacuum circuit breakers for 4Nos outgoing feeders with bus sections P.Ts, C.Ts cable boxes control wiring etc. as per clause No.2 of specification (Total=4Panels + 2Adopter Panel)

11kV Capacitor Banks : Inspection, maintenance and testing of 12.9kV rated 2062 kVAR capacity capacitor banks including CTs, cable box, bus bar, cast resin impregnated reactors, etc. as per clause No.7.1 of specification.

415 V switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s. Siemens make consisting circuit breakers for 2Nos. 1600 A Incomers 1 No. 1600A bus coupler, 2Nos,1000A outgoing ACB feeders and 4Nos 400A & 4Nos. 200A outgoing feeders in the form of MCCBs, bus bars, CTs, cable boxes, cables control wiring etc. as per clause No. 3 of specification (Total= 9Panels).

22 kV IRE Sub-Station

22 kV switchgear : Inspection, maintenancer and testing of 22kV switchgear panel type 8BK80/8BK20 of M/s. Siemens make consisting of 1250A ,3AF type vacuum circuit breakers for 2Nos. Incomers 1No. Bus-coupler & 7Nos. outgoing feeders with bus sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 1 of specification. (Total =10Panels + 3Adopter Panel)

415V switchgear: Inspection maintenance and testing of 415V, AC medium voltage switch gear panel of M/s. L&T make consisting of C-power type air circuit breakers of 2Nos, 2500 A Incomers 1No. 2500A Bus-coupler and 20Nos. 1000A outgoing feeders with electromagnetic/ static release and 6 Nos 400/100/63 Amps SFUs in two tier formation along with bus section, cable boxes, CTs, control wiring etc. as per clause No.3 of specification. (Total =18Nos Panel )

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 400A MCCB, PCC Panel having 1No. Incomer of 400A MCCB and 5Nos. of 125A MCCB & 5Nos. of 63A outgoing feeders for light and power distribution at various place as per clause No. 5 of specification.

22 kV PRAFUL Sub-Station

22 kV switchgear : Inspection, maintenance and testing of 22kV switchgear panel type 8BK80 of M/s. Siemens make consisting of 1250A, 3AF type vacuum circuit breakers for 2Nos. Incomers, 1No. Bus coupler & 4Nos. outgoing feeders with bus sections, PTs, CTs, cable boxes control wiring etc. as per clause No. 1 of specifications (Total =7Panels + 1Adopter Panel)

415 V Switchgear : Inspection, maintenance and testing of 415 V AC medium voltage switch gear panel of M/s. GEPC make consisting M-pact type air circuit breakers for 2 Nos 4000 A Incomers, 1 No 4000A Bus coupler, 4 Nos. 1600A outgoing feeders, 11 Nos 1000 Amps outgoing feeders and 6 Nos 63/100/400 Amps SF'U in two tier formation along with bus sections, cable boxes,CTs, control wiring etc. as per clause No. 3 of specifications (Total=16 Panels) Measurement of Insulation Resistance values of 2 Nos. Sandwich type Bus-ducts is also to be included in this.

22 kV AUMP Sub-Station

22 kV Switchgear : Inspection, maintenance and testing of 22 kV switchgear panel type 8BK80 of M/s. Siemens make consisting of 1250A 3AF type vacuum circuit breakers for 2Nos. Incomers, 1No. Bus-coupler & 3Nos. outgoing feeders with bus sections, PTs, CTs, cable boxes control wiring etc. as per clause No.1 of specification. (Total 6Panels + 1Adopter Panel)

415V switchgear : Inspection, maintenance and testing of 415V AC, medium voltage switch gear panel of M/s GEPC make consisting of M-pact air circuit breakers for 2Nos, 2500 A Incomers, 1No, 2500A Buscoupler, and 14Nos of 1000/630 Amps outgoing feeders in two tier formation along with bus sections, cable boxes, CTs, control wiring etc. as per clause No. 3 of specification. (Total 10Panels)

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V PCC Panel having 1No. Incomer of 400A SFU and 1No. of 315A SFU , 3Nos. of 200A SFU, 1No of 125A SFU, 5Nos. of 63 SFU outgoing feeders for light and power distribution at various place as per clause No. 5 of specification.

22 kV AFD Sub-Station

22 kV Switchgear : Inspection, maintenance and testing of 22kV switchgear panel type 8BK80 of M/s. Siemens make consisting of 1250A 3AF type vacuum circuit breakers for 2Nos. Incomers with bus sections, PTs, CTs, cable boxes control wiring etc. as per clause No.1 of specification. (Total= 2 Panels + 2Cable boxes.)

11 kV RCnD Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switchgear panel type 8BK20 of M/s. Siemens make consisting of 630A, 3AF type vacuum circuit breakers for 2Nos. Incomers 1No. Bus-coupler & 2Nos. outgoing feeders & 11kV switchgear panel type 8BK80 of M/s Siemens make consisting of 1250A, 3AF type vacuum circuit breakers for 1No. outgoing feeder with bus sections, PTs, CTs, cable boxes control wiring etc. as per clause No. 2 of specification. (Total= 6Panels + 2Adopter Panels)

415V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s. GEPC make consisting of M-pact type air circuit breakers for 2Nos 2500 A Incomers, 1No 2500A Bus coupler 7Nos. 1600A outgoing feeders, 12Nos 400/315/200/63 Amps SFUs in two tier formation along with bus sections, cable boxes, CTs, control wiring etc. as per clause No.3 of specification. (Total =11Panels) Measurement of Insulation Resistance values of 1 No. Sandwich type Bus-ducts is also to be included in this.

11 kV DEED Sub-Station

11 kV Switchgear : Inspection, maintenancer and testing of 11kV switchgear panel type 8BK88 of M/s. Siemens make consisting of 1250A, 3AH5 type vacuum circuit breakers for 2Nos. Incomers, 1No. Bus-coupler & 2Nos. outgoing feeders with bus sections, PTs, CTs, cable boxes control wiring etc. as per clause No.2 of specification. (Total= 5Panels + 1Adopter Panel)

415V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s Siemens make air circuit breakers for 2Nos. 1600 A Incomers, 1No. 1600A Bus coupler and 7Nos. 1000 ACB outgoing feeders, 5Nos, 400A & 2Nos. of 200A MCCB outgoing feeders and 10Nos. MCB outgoing feeders. in double tier with bus bars, bus sections, CTs, cable boxes, cables control wiring etc. as per clause No. 3 of specification. (Total = 9Panels)

11 kV Mod. Labs. Sub-Station No. 1

11 kV Switchgear : Inspection, maintenance and testing of 11 kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos 1250A Incomers, 1No 1250A bus-coupler and 3Nos, 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No.2 of specification. ( Total = 6Panels + 1Adoptor Panel)

415 V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s L&T make consisting of air circuit breakers for 2Nos, 3200 A Incomers, 1No, 3200A bus-coupler and 16Nos. 1000A & 04 Nos. 1600A outgoing feeders in two tier with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 3 of specification. ( Total =14Panels)

415 V Bus ducts : Inspection, maintenance and testing of 3000A, 500 V, AC3 phase and neutral copper /aluminium bus bars enclosed in a MS bus duct indoor as per clause No.4 of specification. ( approx. length 18mtr each)

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 800A MCCB, PCC Panel having 2No. Incomers of 800A MCCB, 1No. Bus-coupler of 800A MCCB & 15Nos. of 400A/200A/100A MCCB outgoing feeders for light and power distribution at various place as per clause No. 5 of specification. ( Total =9Panels)

11 kV Mod. Labs. Sub-Station No. 2

11 kV Switchgear : Inspection, maintenance and testing of 11 kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos 1250A Incomers, 1No 1250A bus-coupler and 3Nos, 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No.2 of specification. ( Total = 6Panels + 1Adoptor Panel)

415 V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s Schneider make consisting of air circuit breakers for 2Nos, 3200 A Incomers, 1No, 3200A bus-coupler and 16Nos. 1000A outgoing feeders in two tier with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 3 of specification. ( Total =11Panels)

415 V Bus ducts : Inspection, maintenance and testing of 3000A, 500 V AC3 phase and neutral copper /aluminium bus bars enclosed in a MS bus duct from transformers secondary as per clause No. 4 of specification. ( approx. length 18 mtr each).

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 630A MCCB, PCC Panel having 2No. Incomers of 630A MCCB, 1No. Bus-coupler of 630A MCCB & 15Nos. of 400A/200A/100A MCCB outgoing feeders for light and power distribution at various place as per clause No.5 of specification.

110V Shunt Trip coil for Schneider Make LT Circuit Breaker NW-type : Supply & Installation of Shunt Trip coil of 110V DC for Schneider Make LT Air Circuit Breaker, NW-type as per clause No.8 of specification.

11 kV Mod. Labs. Sub-Station No. 3

11 kV Switchgear : Inspection, maintenance and testing of 11 kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos 1250A Incomers and 2Nos, 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No.2 of specification. ( Total = 4Panels)

415 V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s L&T make consisting of air circuit breakers for 2Nos, 3200 A Incomers, 1No, 3200A bus-coupler and 16Nos. 1000A & 04 Nos. 1600A outgoing feeders in two tier with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 3 of specification. ( Total =14Panels). Measurement of Insulation Resistance values of 2 Nos. Sandwich type Bus-ducts is also to be included in this.

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 800A MCCB, PCC Panel having 1No. Incomer of 800A MCCB, and 5No of 630A/400/250A MCCB outgoing feeders for light and power distribution at various place as per clause No. 5 of specification. ( Total =2Panels)

415 V PCCs for fan motor : Inspection, Maintenance and testing of 1No of 415V, 100A PCC Panel having 1 No. Incomer of 100A & 6 Nos. DOL starter for 0.55 kW fan motor in each panel.(Total 01 Panel and 6 Starter) as per clause No. 5 of specification.

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 400A MCCB, PCC Panel having 1No. Incomer of 400A MCCB, and 6No of 250A/125A MCCB outgoing feeders for light and power distribution at various place as per clause No. 5 of specification. ( Total =2Panels)

11 kV Central Complex Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos 1250A Incomers, 1No. 1250A bus coupler & 4Nos, 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. ( Total =7Panels+1Adoptor Panel)

415 V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s Schneider make consisting of air circuit breakers for 2Nos, 2500A Incomers, 1No, 2500A bus coupler and 9Nos, 1000A, ACB & 9Nos., 400A & 2Nos. of 200A MCCB outgoing feeders in two/three tier with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 3 of specification. (Total =14Panels)

11 kV Engg. Hall Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel of M/s Siemens make 8BK80 , 3AH3 type vacuum circuit breakers for 2Nos 1250A Incomers, 1No 1250A bus coupler & 4Nos 1250A outgoing with bus bar , PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total =7 Panels + 1 adaptor panel).

415 V switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s Siemens/Alstom make air circuit breakers for 3Nos. 3000A Incomers, 2Nos. 3000A bus coupler & 15Nos. 1000A outgoing feeders including 4Nos. 200A MCCB outgoing feeders in single /double tier with bus bars, cables boxes, CTs, control wiring etc. as per clause No. 3 of specification. ( Total =14Panels+1Adoptor Panel ) Measurement of Insulation Resistance values of 1 No. Sandwich type Bus-ducts is also to be included in this.

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V, 630A MCCB, PCC Panel having 1No. Incomers of 630A MCCB & 8 Nos. of 400A/250A/160A/125A MCCB outgoing feeders for light and power distribution at various place as per clause No. 5 of specification. ( Total =2Panels)

11 kV CDM Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos 1250A Incomers, 1No 1250A bus coupler & 4Nos 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total =7Panels + 1Adoptor Panel)

415 V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s Schneider make consisting of Master Pact type air circuit breakers for 2Nos, 2500 A Incomers, 1No, 2500A bus coupler & 12Nos, 1000A outgoing feeders in two tier with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 3 of specification. ( Total =9Panels)

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415V PCC panel consisting of 2 Nos. I/Cs of 630A 16Nos. O/Gs of 63A/400 Amps in the form of MCCBs and 1 No. O/G of 100A feeder in the form of MCB with bus bars, CTs, contactor meters control wires etc. as per Clause No. 5 of specification.

11 kV CTD Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos. 1250A Incomers, 1No. 1250A bus coupler and 2Nos 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total = 5Panels + 1Adoptor Panel)

415 V Switchgear : Inspection maintenance and testing of 415V, AC medium voltage switch gear panel of M/s Alstom make M-pact air circuit breakers for 2Nos 3000 A Incomers, 1No. 3000A Bus coupler & 11Nos 1000A outgoing feeders with bus sections, CTs, control wiring, cable boxes etc. as per clause No. 3 of specification. (Total =14 Panels ) Measurement of Insulation Resistance values of 2 Nos. Sandwich type Bus-ducts is also to be included in this.

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415 V, 600A SFU, PCC Panel having 1Nos. Incomers of 600A SFU , 4Nos. of SFU feeders of 400A , 7Nos. of SFU feeders of 63A & other MCBs for light and power distribution at various places as per clause No. 5 of specification.

415 V Power Control Centre (PCC) : Inspection, maintenance and testing of 415 V, 400A SFU, PCC Panel having 2Nos. Incomers of 400A SFU and 9Nos. of SFU feeders of 63A to 200A & other MCBs for light and power distribution at various places as per clause No. 5 of specification.

11 kV Van-De-Graff Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel 8BK80 of M/s. Siemens make consisting of 3AH3 type Vacuum circuit breakers for 2 Nos 1250A Incomers, 3Nos 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. ( Total= 5 Panels)

415 V Switchgear : Inspection, maintenance and testing of 415 V AC medium voltage switch gear panel of M/s Siemens make consisting circuit breakers for 2Nos, 1600 A Incomers 1No. 1600A bus coupler with 2mtr. length bus duct and 14Nos 400A outgoing feeders in the form of MCCBs & 6Nos. 63A, MCB outgoing feeders with bus bars, CTs, , cable boxes, cables control wiring etc. as per clause No. 3 of specification. (Total =8 Panels).

11 kV RSMS Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel PIX-ROF type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2No. 1250A Incomer, 1No. Bus-Coupler and 4Nos. of 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total =7 Panels + 1 Adopter Panel)

415 V Switchgear : Inspection, maintenance and testing of 415V L.T. switch gear panel M/S Siemens make ACB, 3WL type for 2Nos. 2000A as Incomers, 1No. of 2000A bus-coupler,16Nos., of 400A MCCB, 2Nos., of 160A MCCB with bus bars,CTs, control wiring, cable box etc. as per clause No. 3 & 5 of specification. (Total =9 Panel)

11 kV Purnima Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2No. 1250A Incomers, 1No. 1250A Bus-Coupler and 3Nos. of 1250A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total =6 Panels)

415 V PCC Panel : Inspection, maintenance and testing of 415V L.T. switchgear panel consisting of 2Nos. 800A MCCB Incomers, 1No. MCCB Bus-coupler & 6Nos. of 400A MCCB, 10Nos. of 160A MCCB manually operated with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 5 of the specification. (Total= 7Panels)

11 kV Trombay Hill Sub-Station

11kV SF6 Ring Mains Unit (RMU) : Inspection, maintenance and testing of 12kV Ring Mains Units type FBX-E/12-21 having 630A, 21KA VCB of AREVA/Schneider Electric make consisting of 1No. 630A incomer and 4Nos.630A outgoing RMU with bus bars, cable boxes, control etc. as per clause No. 2 of specification. (Total =5Panel)

415 V PCC Panel : Inspection, maintenance and testing of 415 V distribution boards consisting of 2Nos. 630A MCCB as Incomers , 1No. 630A MCCB as Bus-Coupler and 2Nos. of 250A MCCB as outgoing feeders& 6Nos. of 125A MCCB as outgoing feeders all in the form of PCC panel with bus bar chamber, CTs, cable boxes, control wiring as per clause No. 5 of specification. (Total= 1Panel)

Feeder Pillar : Inspection, maintenance and testing of 415 V Feeder Pillar consisting of 2Nos. 250A MCCB as Incomers , 1No. of 125A MCCB as outgoing feeder, 2Nos. of 63A MCB & 2Nos. of 32A MCB as outgoing feeders all in the form of PCC panel with bus bar chamber, cable boxes, control wiring as per clause No. 5 of specification. (Total= 1Panel)

11kV VHF Sub-Station

11kV SF6 Ring Mains Unit (RMU) : Inspection, maintenance and testing of 12kV Ring Mains Units type FBX-E/12-21 having 630A, 21KA VCB of AREVA/Schneider Electric make consisting of 1No. 630A incomer and 3Nos. 630A outgoing RMU with bus bars, cable boxes, control etc. as per clause No. 2 of specification. (Total =4Panel)

415 V PCC Panel : Inspection, maintenance and testing of 415 V distribution boards consisting of 2Nos. 630A MCCB as Incomers , 1No. 630A MCCB as Bus-Coupler and 3Nos. of 250A MCCB as outgoing feeders & 8Nos. of 125A MCCB as outgoing feeders all in the form of PCC panel with bus bar chamber, CTs, cable boxes, control wiring as per clause No. 5 of specification. (Total= 1Panel)

11 kV CAP Sub-station

11 kV Switchgear : Inspection, maintenancer and testing of 11kV switchgear panel type 8BK80 of M/s. Siemens make consisting of 630A, 3AF type vacuum circuit breakers for 2Nos. Incomer, 1 No. Bus-coupler & 5 Nos. O/G feeders and 1No. 1600A Incomer of Schneider make with bus sections P.Ts, CTs cable boxes control wiring etc. as per clause No. 2 of specification. (Total = 9Panels + 2Adopter Panel)

3.3 kV HT Switch Gear SF6 Panel : Inspection, maintenance and testing of 3.3kV AC High voltage switch gear panel of M/s. ABB make consisting of 2Nos. 1600 A Incomer SF6CBs and 1No. 1600A Bus coupler SF6CBs and 11Nos. 1600A outgoing SF6CBs and 2Nos. ALTR I/C ( L & R ) SF6CB and Schneider make 1No. ALTR I/C-3 VCB with bus sections cables control wiring PT,s, CT,s panels etc. as per clause 2 of specification. (Total = 17panels + 2PT panel + 2Adopter = 21Panels)

415 V Switchgear ACB panels : Inspection maintenance and testing of 415 V AC medium voltage switch gear panel of M/s GEC ALSTOM make consisting of M-PACT type air circuit breakers for 2Nos, 3200 A Incomers, 1No. 3200A Bus coupler and 10Nos. 1000A outgoing feeders in Two tier formation and Siemens make 3200A I/C ACB with cable boxes, CTs, control wiring etc. as per clause No. 3 of specification. (Total = 9Panels + 1Adopter)

415 V Bus ducts For 2 MVA transformer : Inspection maintenance and testing of 3000A, 500 V AC, 3 phase and neutral copper /aluminium bus bars enclosed in a MS bus duct from transformers to LT panel partially indoor and partially outdoor as per clause No. 4 of specification. (Approx. length 10 mtr each)

MCC/PCC/VFD/Soft-starter Panels

415 V MCCs for Condenser & Chilled water Pump motor MCC-13, MCC-15, MCC-21(Soft starter panels ), MCC-23(VFD Panels) : Inspection maintenance and testing of 2Nos of 415V, 1000A VFD Panel of M/s Arrow Engineering consisting 2No of Schneider MASTERPACT NW 10H1 type ACB as IC & 1 no as TIE each & 4 Nos of VFD starters & DOL bypass starter for 120 HP pump in each panel. (Total 2 X 16= 32 starter) & 2 nos of 415V 1000A soft starter panel of M/s Arrow Engineering consisting of 2 no of Schneider MASTERPACT NW 10H1 type ACB as IC & Schneider COMPACT NS800N ,MCCB as TIE each & 4 Nos of Soft starter &DOL bypass starter for 120 HP pump in each panel (Total 2X 16= 32 starters) as per clause No. 5 of specification.

415 V MCCs for Cooling tower fan motor, MCC-16.1, MCC-16.2 : Inspection maintenance and testing of 2Nos of 415V, 250A MCCs Panel of M/s Arrow Engineering consisting of 2 nos Siemens 3 VA MCCB(IC &TIE) & 12 nos DOL starter for 12.5 HP fan motor in each panel.(Total 02 Panel and 2 x 12+4 -= 28 Starter) as per clause No. 5 of specification.

415 V MCCs for Cooling tower fan motor, MCC-22.1, MCC-22.2, : Inspection maintenance and testing of 2Nos of 415V, 250A MCCs Panel of M/s Arrow Engineering consisting of 2 nos Siemens 3 VA MCCB(IC &TIE) & 6 nos DOL starter for 10 HP fan motor in each panel.(Total 02 Panel and 2 x 6+6 = 18 Starter) as per clause No. 5 of specification.

415 V MCCs for water softening plant. : Inspection maintenance and testing of 415V, 100A MCCs Panel, having 1No of 100A Incomer MCCB/SFU , 9 Nos. DOL starter for motor in panel. (Total=9 starter) as per clause No.5 of specification.

415V PCC for Cooling Tower Fan motor (PCC-16 & PCC-22) : Inspection maintenance and testing of 1No. of 415V, 650A PCC Panel of M/s Arrow make consisting 2Nos. I/C and 1No. Bus-Coupler & 6 Nos outgoing feeder panel as per clause No. 5 of specification.

415V PCCs for Light & Power Distribution, PCC-14 &24 : Inspection maintenance and testing of 2Nos of 415V, 800A MCCB, PCCs Panel having I/C of 800A MCCB in each panel and 20Nos each of feeders for light and power distribution at various places as per clause No. 5 of specification.

3.3 KV ABB make HPA12/1640C SF6 circuit Breaker Item No 21.23 to 21.48 as per clause no 23 of specification

Servicing, overhauling & repairing of 3.3 KV ABB make HPA12/1640C SF6 circuit Breaker

Fabrication,assembly & retrofitting of following parts for 3.3 KV ABB make HPA 12 1640C SF6 circuit breaker Item No 21.25 to 21.23

Top Shaft Assy

Closing spring assy

Tripping spring assy

Catch & Tension spring

Al link pull spring

Ratchet wheel (Locking arm) assy

Tripping spring holding bolt with Nylon nut

Under voltage coil assy (1VEB-527401-6)

Top TFM

Bottom TFM

Pull Rod

Pull Rod Bush

Dowel Pin

Under Voltage Release

Overhauling of SF6 Breaker Pole with replacement of required O rings, SF6 dial (indicator) Vacuuming & testing & commissioning

SF6 gas 11Kg with Cylinder

Pressure switch O ring on NRV

Density switch O ring on NRV

Damping Device Top

Spring for Catch

Split pin for closing & tripping spring holding

Spring charging indicator assy

CB ON/OFF indicator assy with sticker

Hardware set with M6 Screws, Cup washer & Circlips etc

11kV CFB Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos. 1600A Incomers, 1No. 1600A bus coupler and 12Nos 630A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total = 15Panels + 1Adoptor Panel)

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos. 630A Incomers and 6Nos 630A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total = 8 Panels)

3.3 kV HT Switch Gear VCB Panel : Inspection, maintenance and testing of 3.3kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos. 1250A Incomers, 1No. 1250A bus coupler and 10Nos. 630A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total = 13Panels + 1Adoptor Panel)

415 V Switchgear : Inspection maintenance and testing of 415V, AC medium voltage switch gear panel of M/s Larsen & Toubro make U-Power air circuit breakers for 1Nos. 4000 A Incomers , 1No. Bus-coupler & 14Nos 1250A outgoing feeders with bus sections, CTs, control wiring, cable boxes etc. as per clause No. 3 of specification. (Total =16 Panels )

11 kV North Gate Sub-Station

Unitized Sub-Station (Transformer, HT Breaker (RMU) and LT Breaker) : Inspection, maintenance and testing of 11kV switch gear panel of M/s Schneider make consisting of 1No., 750kVA Dry type transformer, 1No. Indoor type compact switchgear, 12 kV, 630 A, 25kA with VCB/SF6 insulated compact extendable RMU, 4 Way (2 nos. transformer feeder and 2 nos. isolator feeder, CT2CT2) type and 1 No 1250A, 4 pole ACB as outgoing, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification.

415 V PCC Panel : Inspection, maintenance, and testing of 415V AC medium voltage switch gear panel of M/s ARROW make consisting of 2 No 1250A, FP MCCB as incomer with 1 No 1250A, FP MCCB as Buscoupler , 1250A TPN tinned copper bus-bars and outgoing as 6Nos. 500A , 4Pole, MCCB, metering, CTs etc. All MCCB's are motorised, electrically operated, fitted with microprocessor based release with communication (mod bus) feature as per clause No. 5 of specification.

PCC-1.2 (APFC Panel) : Inspection, maintenance and testing of APFC panel with 350 kVAR, 9 Stage Mix dielectric type heavy duty capacitor banks. (5x50 + 4X25) kVAR having 1 Nos 500A TPN MCCB, as incomer, 600A TPN tinned copper bus-bars and outgoing as 5 Nos. 125/100A SFU with 110A power contactor, 4 Nos. 100/60A SFU with 60A power contactor, APFC relay, metering, CTs etc. as per clause No. 7.2 of tender specification.

PCC-1.3 (AMF Bypass Panel) : Inspection, maintenance and testing of PCC with 415V, with 1 Nos 315A TPN MCCB as incomer, 400A TPN tinned copper bus-bars and outgoing as 1 No 250A TPN MCCB, 2 Nos. 125A TPN MCCB, metering, CTs etc. as per Clause No. 5 of tender specification.

EP-1.4(Emergency PCC) : Inspection, maintenance and testing of LT distribution panel for D.G. Set consisting of 2 Nos. 440V, 315 A rated MCCB as LT incomer with 1 no 400A M/s. HPL Socomec automatic change over/Transfer switch, 2 no. 440 V, 315 A MCCB for DG feeder and main feeder as a incomer. 1 No. 440V, 200A rated MCCB, 2 No. 440V, 150 A rated MCCB 2 No. 440V, 100A rated MCCB's as outgoing, PLC/microprocessor based AMF control, protection relays, push buttons, indications, interlocks, enunciator, metering, cubicle type complete in all respects and as per Clause No. 5 of tender specification.

DC to DC Converter for Unitized S/S.Supply, installation, testing and commissioning of 110V DC to DC converter suitable for constant output from variable DC input with (320 to 450V) in a MS Powder coated box with 110V +/-1%, 15A rating DC with incomer switch & 3 nos. 16A SDF and as per Clause No. 9 of tender specification.

11kV Animal House Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos. 630A Incomers, 1No. 630A bus coupler and 4Nos 630A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total = 7Panels + 1Adoptor Panel)

11kV New Engg Hall Sub-Station

11 kV Switchgear : Inspection, maintenance and testing of 11kV switch gear panel HWX type of M/s Schneider Electric make consisting of vacuum circuit breakers for 2Nos. 1250A Incomers, 1No. 1250A bus coupler and 12 Nos 630A outgoing feeders with bus bar sections, PTs, CTs, cable boxes, control wiring etc. as per clause No. 2 of specification. (Total = 15Panels + 1Adoptor Panel)

MASCOT Sub-Station

415 V Switchgear : Inspection, maintenance and testing of 415V AC medium voltage switch gear panel of M/s GE (EE) make air circuit breakers M-pact type for 2Nos 2000A Incomers 1No 2000A B/C, 23Nos. outgoings 400/250/100/32 Amps SFUs along with bus sections,CTs, cable boxes, control wiring etc. as per clause No. 3 & clause 5 of specifications (Total =10Panel +2Adaptor Panel )

415V MCC panel : Inspection, maintenance and testing of 415V AC medium voltage MCC panel (Draw out type) consisting of 13Nos. GE make 200/100/32 Amps SFUs along with DOL starters, contactors, CTs, cable boxes, control wiring etc. as per clause No. 5 of specification.

SUPER COMPUTING FACILITY

415 V Switchgear : Inspection, maintenance and testing of Siemens make PCC type LT distribution panel having 2Nos. 1600A Incomers, 1No. 1600A Bus Coupler and 26Nos. of O/G feeders in the form of MCCBs/MCBs in the range of 125A to 250A, with bus sections, CTs, PTs, cable boxes, control wiring etc. as per clause No. 3 & 5 of specification. (Total=10Panels.)

415V L.T. MCC/PCC Panels Inspection, maintenance and testing of Siemens make MCC/PCC type panel for Air-conditioning units having 1No. 200A, MCCB Incomer; 10Nos., 22.5 KW/15KW motor starter feeder and 2Nos. 16 Amps MCB outgoing feeders, with bus bars, CTs, PTs, contactors, starters, cable boxes, control wiring etc. as per clause No.5 of specification.

415V L.T. MCC/PCC Panels Inspection, maintenance and testing of Siemens make MCC/PCC type panel for Air-conditioning units having 1No. 200A, MCCB Incomer; 8Nos., 2.2 KW/1KW motor starter & 2Nos. 16 Amps MCB outgoing feeders, with bus bars, CTs, PTs, contactors, starters, cable boxes, control wiring etc. as per clause No. 5 of specification.

415V L.T. MCC/PCC Panels Inspection, maintenance and testing of Siemens make MCC/PCC type panel for Air-conditioning units having 2Nos. 800A, MCCB Incomers & 1No. 800A, MCCB Bus Coupler; 7.5 KW/11KW motor starter & 10 Nos. 125/250/400 Amps MCCB outgoing feeders, with bus bars, CTs, PTs, contactors, starters, cable boxes, control wiring etc. as per clause No. 5 of specification.

L. T. Training School Sub-Station

415 V PCC Panel : Inspection, maintenance and testing of 415 V L.T. switchgear panel consisting of 2Nos. 630A MCCB Incomers, 1No. MCCB Bus-coupler & 6Nos. of 400A MCCB, 3Nos. of 200A MCCB manually operated with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 5 of the specification. (Total= 7Panels)

L T Capacitor Banks : Inspection, maintenance and testing of 500V rated capacitor banks including CTs, cable box, bus bar etc. as per Clause No. 7.2 of specification.

150kVAR capacity panel having 3Nos. capacitor units each of 50 kVAR capacity

150kVAR capacity panel having 6Nos. capacitor units each of 25 kVAR capacity

300kVAR capacity panel having capacitor units each of 40/26/13 kVAR capacity

Thermo Scanning of 110kV Switchyard at North Site, BARC. : Thermo Vision Camera Scanning of terminal connectors/'T' joints etc. of all equipments of both lines of 110kV switchyard at 110kV Receiving-Station as per clause No. 10 of specification.

Thermo Scanning of 110kV terminal yard at South Site, BARC. : Thermo Vision Camera Scanning of terminal connectors/'T' joints etc. of all equipments of both lines of 110kV switchyard at as per clause No. 10 of specification.

Condition monitoring of 145kV CT : Measurement of Turns ratio, Capacitance & Tan∂ of 145 kV CT's as per clause No. 11 of specification

Condition monitoring of 110 kV PT : Measurement of Turns Ratio, Insulation Resistance, Capacitance & Tan∂ of 110 kV PT's as per clause No. 12 of specification

Condition monitoring of 96kV LA : Measurement of on-line Leakage Current by Surge Arrester Leakage Current Analyser, Insulation Resistance as per clause No. 13 of specification

Outdoor 145kV SF6 Circuit Breakeras per clause no. 14 of specification.

Inspection, maintenance and testing of 145kV , 3150A, 40KA, SF6 outdoor circuit breaker type 3APIFG of Siemens make

Supply and Installation of SF6 Gas cylinder of capacity 9kg for 145kV , SF6 outdoor circuit breaker type 3APIFG of Siemens make.

Supply and Installation of SF6 Gas filling kit for 145kV , SF6 outdoor circuit breaker type 3APIFG of Siemens make

Replacement of NRV, small gas pipe and big gas pipe and Resolving the issue of Gas Leakage from Breaker

Outdoor 145kV, Isolator : Inspection, maintenance and testing of 145kV, 1250A, outdoor isolator of S&S make as per clause no. 15 of specification.

24V, 10A, DC Stabilised power supply (SMPS) : Supply & installation of 24V,10A, DC Stabilised power supply as per clause No. 16 of specification.

Closing buffer of 12kV HWX Switchgear panel : Supply & installation of closing buffer of 12kV HWX Switchgear panel as per Clause No. 17 of specification

Opening buffer of 12kV HWX Switchgear panel : Supply & installation of opening buffer of 12kV HWX Switchgear panel as per Clause No.18 as per specification

415 V PCC Panel

415 V PCC Panel : Inspection, maintenance and testing of 415V LT PCC panel consisting of 1 to 2Nos. MCCB of rating 800A/630A/400A MCCB as a Incomers/Bus-coupler, 4 to 8 Outgoing MCCB of rating 400A/250A/200A MCCB and 4 to 12 Outgoing MCCB of rating 160A/150A/100A/63A MCCB , SFU's and Starters etc. with bus bars, CTs, cable boxes, control wiring etc. as per clause No. 19 of the specification.

415 V PCC Panel at Engg Hall No 5: Inspection, maintenance and testing of 415V, PCC Panel having 1No. Incomer of 2000A ACB, 1No. Bus-coupler of 1000A ACB and MCCB outgoing feeders of 8 Nos 250A MCCB, 4 Nos 400A MCCB, 8 Nos 63A MCB for light and power distribution at various place as per clause No.3 & 5 of specification.

415 V PCC Panel at Engg Hall No 5: Inspection, maintenance and testing of 415V, PCC Panel having 1No. Incomer of 2000A ACB, 1No. Bus-coupler of 1000A ACB and MCCB outgoing feeders of 3 Nos 800A MCCB, 4 Nos 630A MCCB, 1 No 400A MCCB, 1 No 250A MCCB for light and power distribution at various place as per clause No.3 & 5 of specification.

Checking of 22kV VCB / 11kV VCB / 430V ACB by Service engineer of OEM or their Authorized Service Agent as per Clause No 20 of Specification

Fortnightly Maintenance of HT/LT Switchgear Panels as per Clause No. 23 of specification

22kV Switchgear Board having 7 to 11 VCB Panels

11kV Switchgear Board having 23 to 26 VCB Panels

11kV Switchgear Board having 14 to 17 VCB Panels

11kV Switchgear Board having 4 to 8 VCB Panels

415V Switchgear Board having 16 to 20 ACB Panels

415V Switchgear Board having 9 to 14 ACB Panels

415V Switchgear Board having 6 to 10 ACB & MCCB Panels

Deployment and operation of Diesel/Petrol/CNG operated Transport permitted Pick-up Four wheeler (4 seater + Pick-up) with driver having Transport driving Licence as per Clause No. 21 of specification

Deployment of above said Vehicle

Operation of above said vehicle

Shifting and transporting of materials as per clause No. 22 of specification

Providing and supplying of Truck of minimum capacity 09 MT with Five Labours for the collection and transportation of scrap items, unserviceable equipments, furniture, debris, garbage at various location inside BARC Trombay, Mumbai, as instructed by Project Engineer.

Providing and supplying Hydra crane 15 MT capacity for the collection and transportation of scrap items, unserviceable equipments, from various location inside BARC Trombay Mumbai.

Providing, supplying "JCB" loader cum excavator including operator and helper executing the work like excavation, grading, levelling, debris cleaning and other works at various location inside BARC Trombay Mumbai all as directed by Engineer In charge as and when required .

Supply and Installation of FRP electrically insulating sheet as per clause No. 24 of specification

Supply and Installation of FRP electrically insulating sheet of 5mm thick & 1m x 1m size

Supply and Installation of FRP electrically insulating sheet of 3mm thick & 1m x 1m size

Supply and Installation of FRP electrically insulating sheet of 2mm thick & 1m x 1m size

Supply and Installation of Emergency Light /lamp/torch as per clause No. 25 of specification

Supply and Installation of emergency light 36 LED, 4500 mAh or equivalent

Supply and Installation of emergency torch LED rechargeable torch, 6 volt, 4 Ah or equivalent

Supply & installation of Space Heater for Switchgear Panels (230V, AC, 50Hz) as per clause no. 26 of specification

Thermostat 15A, 240V AC

Indication Lamps (LED) for Switchgear Panels as per clause no. 27 of specification

110V DC (5 diff colour - Red, Green, Blue, White & Amber )

240V AC (4 diff colour - Red, Green, Blue, & Yellow)

Sub-Stations Layout , SLD and Cable route Layout as per clause No. 28 of specification.

Preparation of GA, SLD and cable route layout of Sub-Stations in Auto CAD

Board for Single Line Diagram : Supply and Installation of Single Line Diagram flags, Digital printing of size width 1m to 2m and length 2m to 3m suitable for SDL of sub station at various sub-Stations.

Supply and installation of insulating Mats (Floor) for electrical purpose(as per IS 15652:latest) as per clause no 29 of specifications.

11kV, Class B , Insulating Mats (Floor), thickness 2.5mm, colour Blue

33kV, Class C , Insulating Mats (Floor), thickness 3mm, colour Green

Preventive maintenance, cleaning and functional checking of Lighting fixtures, Exhaust fan, Ceiling fan including all accessories in Sub-Station & surrounding area etc. as per clause No. 30 of specification.

Indoor lighting fixtures 20W to 40W, LED Batten, Wall/ceiling Mounted

Outdoor lighting fixtures 36W to 72W, LED, Wall Mounted

3 phase / 1 Phase exhaust fan (300mm to 600mm sweep)

Ceiling fan

Measurement of earth resistance : Cleaning and watering of earth pit chamber and measuring the earth resistance as per clause No. 31 of specification.

Supply & installation of solid FRP Rod with copper clamp and 6Sq mm Cu conductor of green colour flexible wire of 5m length as per clause No. 32 of specification

FRP Rod of minimum 15mm diameter and 1.5 meter length

FRP Rod of minimum 15mm diameter and 2 meter length

Tool Board : Supply and installation of tool Boards of made of FRP sheet of 5mm thick, Length 150cm to 200m amd width 100cm to 150cm as per clause No. 33 of specification

Extension Board : Supply & installation of extension board as per clause No. 34 of specification

Extension Board in Metal Body : Supply & installation of extension board with 3 core, 2.5 Sqmm Cu conductor of TRS Cable of 15m length.

4 Socket Power Strip with Surge Protector (Spike Guard), 6A, 250V AC

Wall Mounting White Board. : Supply and installation of wall mounting white board of size Length 4 to 6 feet and width 2 to 3 feeet with white board marker & duster/wiper as per clause No. 35 of specification

Annunciator for 22kV / 11kV Switchgear Panels for one to one replacement at site as per clause No. 36 of specification.

Carrying out quarterly maintenance of M/s Prevalence Green Solutions Pvt Ltd & M/s Republic Motors make battery powered vehicle ( Four Wheeler) as per clause 37 of technical specification ( Two Vehicle Quarterly AMC = 2X8=16 Times in Two Years ) as per clause No. 37 of specification

Supply and installation of spares parts of M/s Prevalence Green Solutions Pvt Ltd & M/s Republic Motors make battery powered vehicle ( Four Wheeler) for carrying out maintenance work of vehicles as and when required as per clause no. 38 of technical specification

Key switch

Flasher

Front head light

Back light

Accelerator pedal / Break assembly

Light switch

Reverse/Forward switch

Combination switch

Indicator (left & right)

Break drum

Break shoe

Yoke shaft / Shock absorber

Oil Seal

SGC side mirror (left & right)

Break wire

Break Linear

Lithium Battery Pack ( compelet set) for M/s Prevalence Green Solutions Pvt Ltd make battery powered vehicle ( Four Wheeler)

Lithium Battery Pack ( compelet set) for M/s Republic Motors make battery powered vehicle ( Four Wheeler)

Rain Cover

Battery Charger

Rubber Bush

Wiper motor / Rack-N-Pinion Ball Joint / Master Cylinder

Battery Stud

Charging socket

Charging plug

Reverse buzzer

Wiring harness

Tyre 165/60 R12

Leaf spring set front / Leaf spring set rear

Foot Pump

Tie rod / Axle Shaft

Steering wheel / Column / Rack and pinion

Motor / Controller / Differential

Supply and installation of Digital Display Signage & Standee size shall be >=49 inch as per clause No. 39 of specification.

Supply and installation of Label Printer as per clause No. 40 of specification.

Supply and installation of LED Backlight panel (Monitor) size shall be >=53” for SCADA System as per clause No. 41 of specification.

Supply and installation of Multi Function Meter for HT / LT Switchgear Panels as per clause No. 42 of specification.

Supply and Installation of fuse as per clause No. 43 of specification.

3.15A, 11kV HT HRC fuse for P.Ts

3.15A, 22kV HT HRC fuse for P.Ts

Control Fuse, 2 Amps to 4 Amps

Control Fuse, 6 Amps to 10 Amps

Control Fuse (Glass Fuse), 0.5 Amps to 4 Amps

Supply and installation of Three element auxiliary relay VAA33 for one to one replacement at site as per clause No. 44 of specification.

Testing of REF Scheme of Transformer as per Clause No.45 as per of specification

Supply & installation of Feeder Management and Feeder Protection Relay for One to One replacement in existing HT / LT Switchgear Panel as per Clause No 46 of specification

Feeder Management Relays CT I/P ‐ 1A/5A, PT I/P ‐ 100‐120AC, 110‐250V DC, Measurement - Current, Voltages, Power P, Q, S , Protection - 50/51, 50N/51N with Fault recording, Event recording, Disturbance recording, communication port.

Feeder Protection Relays CT I/P ‐ 1A/5A, 10‐250V DC, Measurement - Current, Protection - 50/51, 50N/51N with Fault recording, Event recording, Disturbance recording, Communication port.

Sealing Compound as per Clause No 47 of specification

Epoxy Compound

Monoplast Tap, Size 3mm X 35mm X 1 meter

Supply & installation of High Voltage Bus-Bar Insulating heat Shrinkable Sleeve and High Voltage Bus-Bar Insulating Tape as per Clause No 48 of specification

High Voltage Bus-Bar Insulating heat Shrinkable Sleeve of 30/12mm

High Voltage Bus-Bar Insulating heat Shrinkable Sleeve of 50/20mm

High Voltage Bus-Bar Insulating heat Shrinkable Sleeve of 100/40mm

High Voltage Bus-Bar Insulating heat Shrinkable Sleeve of 120/50mm

High Voltage Bus-Bar Insulating heat Shrinkable Tape of 25mm

High voltage, self fusing EPR based tape a roll of 30 feet length x width of 38mm x 0.76 mm thickness with transparent snake liner & tamper proof void guarantee sticker.

Supply & Installation of High tensile nut & bolts (size as per site requirement) as per Clause No. 49 of Specification

Yogiraj Powertech Pvt Ltd.

Telawne Cromptek Electricals Pvt. Ltd.