PROVN OF CERTAIN TOILETS AND ADDN ALTN TO EXISTING TOILETS AT VARIOUS LOCATIONS AT AF STN LEH

Amount

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework and precast concrete articles and precast concrete block walling complete all as specified and as directed by by Engr-in-charge.

Demolition of reinforced cement concret of any description and in any position not otherwise specifically provided for comp[lete all as specified and as directed by Engr-in-charge.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by by Engr-in-charge.

Taking up or down 15/20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by by Engr-in-charge.

Dismantling of cast iron or reinforced concrete drain pipes, up to 100mm dia , jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by by Engr-in-charge.

M&L Cement concrete in filling and mass concreteType D-2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed by Engineer-in-Charge.

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-charge.

Formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for Reinforced cement concreteType B1 1:2:4 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for Reinforced cement concrete Type B1 1:2:4 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.

M&L for Reinforced cement concreteType B1 1:2:4 Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

S&F TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 75 mm thick Cement concrete type C-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-charge.

M&L 50 mm thick Cement concrete type B-0, 1:2:4 (20 mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge.

M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including Screed bed or bedding layer of mortar 15 mm 1:4 thick for laying floor finishes and complete all as specified and as directed by Engineer-in-Charge.

Glazed ceramic colured tiles in vertical surface of area exc 0.08 & n exc 0.15 Sqm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints,fixed to wall including all connections & fittings complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints,fixed to wall including all connections & fittings complete all as specified and directed by Engr-in-Charge.

S&F PVC SWR) 110mm bore vent cowl

S&F PVC SWR) 75mm bore vent cowl

M&L Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engr-in-charge.

S&F100 mm Aluminium anodised,barrel tower bolts of ex truded section and fixed complete all as specified and as directed by Engr-in-charge.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engr-in-charge.

S&F 125mm Aluminium handles, cast type, anodised complete all as specified and as directed by Engr-in-charge.

4.8 mm Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-charge.

4.8 mm Sheet glass,ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-charge.

S&F Rolled Mild Steel sections Fe 410-W (Gde-E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F Rolled Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

S&F 16mm bore Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long

Mild steel screw bolts 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nutlength of bolt exc 5cm but n exc 10cm long complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F for pre–painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion white or tinted on walls over a coat of chalk whiting on plastered surfaces ,preparatory to distempring complete all as specified and as directed by Engineer-in-Charge.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and as directed by Engineer-in-Charge.

M&L Granite 20mmm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms,washroom counters and like including Screed bed or bedding layer of mortar 15 mm 1:4 thick for laying including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and Demolition of Stone slabs and tiles of any description or thickness in floors ,aprons,counters,plateforms etc laid bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. .

S&F in repair Bib taps,15 mm bore fancy type cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Stop valves / angle valve, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Grating doom 100mm dia of PTMT complete all as specified and directed by Engr-in-Charge.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repair 40mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. Cm for WHB fixed with necessary fixing arrangements complete all as specified and directed by Engr-in-Charge.

S&F in Repairs counter below Vitreous coloured China wash basin, size 600x480mm , excluding taps,but incl all aceesories complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 32 mm Waste coupling of PTMT (half or full threaded) complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china urinal partition white of size 310 x 700 mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China coloured squatting pan, ‘Orissa’pattern, size 580 x 440 mm with integral foot rests including all connection ,flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and directed by Engr-in-Charge.

S&F in repair 10 Litres cap PVC valveless ,syphonic action type,flushing cistern,low level,white, with inlet, ball valve, float and handle including bracket

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair fancy type Premium quality Chromium plated Soap Dish Square or Rectangular complete all as specified and as directed .

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed by Engineer-in-Charge

M&L 100 mm thick Cement concrete type C-2, 1:4:8 (40mm graded aggregate) as in sub base Plinth protection complete all as specified and directed by Engr-in-charge.

M&L 50 mm thick Cement concrete type C-2, 1:2:4 (40mm graded aggregate) as in sub base Plinth protection complete all as specified and directed by Engr-in-charge.

M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including Taking up or down existing tubing and connections complete all as specified and directed by Engr-in-Charge.

M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including Taking up or down existing tubing and connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor

Excavation in trenches in hard/dense soil not exc 1.5 m wide and not exc 1.5 m depth for laying of pipe and getting out excavated material complete all as directed by the Engineer–in–charge.

Returning, filling in incl spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engrineer-in-Charge.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete, all as specified and as directed.

Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & directed by Engineer-in-Charge.

Supply & laying un-reinforced pre cast concrete cable covers class LV, type-1, flat, of size 250mm x 150 mm x 40mm all as specified & directed by Engineer-in-Charge.

Taking down carefully copper/Aluminium point wiring (Light,fan,socket or power) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for point wiring for one light point controlled by one switch one way in & including PVC conduit or casing and capping as per site requirement using FRLS PVC unsheathed multistrand copper conductor cable 1.5 sqmm single core for one light/fan point/bell point controlled by one switch including 3 mm thick plastic laminated sheet cover over PVC / wooden Box for earth continuity insulated PVC unsheathed(green colour) 1.5 sqmm copper earth wire connected to common earth dolly using and making good to distrubed surfaces of wall/floor including matching the existing colour complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.

All as per item No 84 above but for wall fan/exhaust fan point controlled by one way switch omplete all as specified.

All as per srl item No. 84 here-in-before but for 15 Amp independent socket outlet using 2.5 sqmm ingle core wire complete all as specified.

S&F Switch piano, flush type 5 Amps One Way 230 volts complete all as specified.

S&F Socket outlet 2-in-1 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F Switch one way 15 Amps flush type 230 volts complete all as specified.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F Holder insulated body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F Crystal glass LED tube light of 1x20W, T8 , 4ft. (double side connection with LED driver) with very high efficacy suited for installation in existing tubelight G13 lamp holders to give glare free light including complete all as directed by Engr-In-charge.

S&F universal Regal batten for LED tube Double side connection Complete 1x22 Watt.

S&F LED Adore Lamp 9/10W, B22 base 6500K CDL type complete all as directed by Engr-In-charge.

M&L for Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 Nos. (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping complete all as directed by Engr-In-charge. Note : (i) Two single core cable and one run of earth copper cable will be measured and paid as one unit length

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

Exhaust Fan metallic body, 300 mm sweep, single phase, 230 volts 50 Hz Ac 1400 RPM, energy saving, heavy duyty totally enclosed, heavy duty motor with die-cast aluminium rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surface ( including plastering, necessary brickwork and distempering) to match with the existing specification connecting electrically using 3 core 0.75 sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as diretcted .

Taking down old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface all as directed by Engineer-in-charge.

S&F Sheet metal enclosure double door for DB's SPN 2 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-In-charge.

Supply, laying, jointing, testing and commissioning LT UG cable of size 16 Sqmm 2 core 1100 V grade PVC insulated, PVC sheathed armoured aluminium conductor laid in trenches/ on poles through GI protection pipe complete including connection of cable at both ends with suitable size of glands, aluminium lugs complete all as specified and directed . Note : Excavation, Earth work, sand cushioning, GI pipe protection, PCC cable cover shall be measured and paid seperately under respective item of BOQ.

S&F Energy saving new generation Endura Rugby Neo - IP65, 10W LED IP65 bulkhead luminaire with opal diffuser, etc complete with all accessories rewired electrically connected all as specified and directed by Engr-Incharge.

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings( such as bends, elbow, TEE, shorts pieces, connetcors back nut, diminishing pieces, caps and plug, unions etc) complete all as specified and directed by Engr-Incharge.

S&F 20 mm bore dia CP stop valve/angle valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete.

Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25meters deep below ground level) with top edge of the plate not less than 1.5meters below normal ground level, connected to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to DBs all as specified and directed.

Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents

M/S KAMLA CONSTRUCTION CO. (BID ID -3088393)