Providing and fixing weld mesh fencing to protect ORG Instrument in Lower Narmada Basin, Under Regional Office, NCA Indore

Providing and fixing weld mesh fencing to protect ORG Instrument in Lower Narmada Basin, Under Reginal Office, NCA Indore

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.All kind of soil

Steel work welded in built up sections/framed work, including cutting hoisting. fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, included cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded steel wire fabric Total area of Wire Mesh 1 x1 sq Inch 2.6 mm thick 12 Gauge

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate/retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M20 grade with minimum cement content of 270 kg/cum

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

HIRE CHARGES OF PLANTS & MACHINERY Hire charges of TATA 407 or equivalent for local shifting (Rate consider with 15 % Contractor Profit and Over Head Charges)

HIRE CHARGES OF PLANTS & MACHINERY Hire charges of Generator 250KVA. Rate consider with 15 % Contractor Profit and Over Head Charges)

Providing and Fixing Name plate with Name of the ORG Stationnmade up of Steel Plate 5 mm thick of Size (0.60 Meter x 0.90 Meter)