Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.2 LAccepted-AOC RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹51.6 L+₹1.6 L (3.21%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹58.3 L+₹8.3 L (16.6%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
1 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE BR-I AND AGE EM UNDER GE CENTRAL DELHI CANTT-10
2022_MES_522066_1
GE/C-14/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE BR-I AND AGE EM UNDER GE CENTRAL DELHI CANTT-10
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹1 L
Yes
15 Jun 2022
5 May 2022
3 Jun 2022
5 May 2022
1 Jun 2022
19 May 2022
5 May 2022 - 19 May 2022
60 days
Amount
Dismantling of water tank of any type/pattern exc 250 ltr but n exc 500 ltr capacity and removing from site complete all as specified
S&F Rotational moulded polyethylene water storage tanks triple layered of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including 20mm dia brass float valve comple & making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified.
Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified
M&L 25 mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed aggregates as in floor surface all as specified and directed.
M&L for cement concrete Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) in PCC blocks for holdfasts, benching, coping and the like including weathering,slightly rounded or chamfered angles
M&L for precast cement concrete type B-o 1:2:4,set in cement mortar 1:4 (12.5 mm graded aggregate ) louvres and jallies ,40 mm thick(meassured solid ), including all moulding complete all as specified & directed
M& L Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thick , 75cm wide as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement complete all as specied
M & L for glazed ceramic digital tiles of size 300x600x7-8mm thick in vertical surfaces of wall set and jointed in neat cement slurry as per manufacturers instructions and pointed in white/ coloured cement, laid over and including bcaking coat 10mm thick in cement mortar 1:4, complete all as specified (Make : KAJARIA/SOMANY/ORIENT)
M & L for coloured non skid ceramic tiles of size 300x300x 7-8mm as in floors, set and jointed in neat cement slurry as per manufacturers instructions and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified (Make : SOMANY/ORIENT)
M&L for non skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc .18 sqm but n exc .38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as speceifed and directed.
All as per item no 10 above including 10 mm thick plaster on vertical surface/skirting on wall in cement and sand mortar 1:4.
Complete removal exising old surfaces of wall by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water applying 2-3 mm birla wall care putty and apply two coat oil bound distempr over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.Make: nerolac paint/Shalimar paints/Asian paint)
Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement up to hieght of four storey ,including scaffolding complete.
M &L 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per ltr, water ration 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr complete all as specified and directed. Note: Contractor shall deposit empty bag to MES storeyard
M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building ,complete all as directed
M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified
M&L preparation of new plastered surfaces of wall and applying two coats of weather exterior paint over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete complete all as specified and directed
M&L for new plaster surface two coat of oil bound destemper over 1 to 2mm thick of birla white putty including preparation of newly plastered surface etc all as specified.
Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed
S&F Fibre glass reinforced plastic door frames shall be three lagged of cross section 60cm x 45mm having single rabate of 32mm x15mm to receive shutter of 30mm thickness the laminate door frame moulded with fire retadant grade unsaturated polyster resign and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three lags, the frame shall be covered with fible glass from all sides MS stay shall be provided at the bottem to steady the frame Make-: Rajshree plastiwood Pvt Ltd/ Hindopan/Marino or equlivant.
S&F FRP Door shutter shall be 30mm thick glass fibre Reinforced plastic (FRP) pannelled door shutter of required colour and approved brand and manufacturer. Made with fire retardant grade unsaturated polyster resin mouded to 3mm thick FRP laminate for forming hollow rails and styles wit wooden frame and suitable bolcks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP paneles and confirming to IS 14856-2000 Make-: Rajshree plastiwood Pvt Ltd/ Hindopan/Marino or equlivant.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded Complete all Specified and directed.
All as per item no 24 above above but without glazing bars
S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded
Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame)complete all as specified
S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete all as specified
All as per item no 28 above but 105x60mm
M&L for PCC 1:3:6 type C1 as in back filling of pressed steel door frames
S&F factory made second class Hard wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers
S&F 35 mm thick facotry made IIst class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats
Supply and fix stainless steel wire cloth 0.38mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 150 mm long, extruded section, complete all as specified.(Make :Mohan Metal/ Classic/Argent)
Supply and fix extruded aluminum alloy handles fabricated type anodised of size 150mm long.
M&L 4mm thick sheet glass n exc 0.5 sqm each pane ordinary quality and glazing withoil putty or fixed with beads, all as directed.
S&F 200 mm long mild steel barrel tower bolts, stove enamelled black with bright bolt & fixed with screws, complete all as specified.
Supply and fix 300mm long, mild steel, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified.
S&F 150mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified
Supply and fix 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding where ever necessary complete all as specified and directed Make:Ritz or equivelent
Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified
Taking up or down steel tubing and connections, including cleaning bore of tubing 15mm complete all as specified
Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed
Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm
All as per item no 45 above but 20mm dia.
Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified.
Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge.
Supply only in repairs PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified.
Supply and fix in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified
S & F in repair Stop Valve 20mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified.
Supply and fix in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. (Make: Zim/ Parko)
S&F in repair PVC connection 15mm dia and 60 cms long with two nos of brass nuts and washers complete Make Polytuff/symet or equivalent
Supply and fix in repairs shower rose, chromium plated brass, fancy type, 100x100 mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as directed.
Supply only 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified
S&F stop valves cast copper alloy serwed down high pressure , 15 dia bore fixed in repairs.
S&F in repair stainless steel of AE-SI-316 grade towel rack of size 600mmx300mm including a pair of brass bracket complete all as specified and as directed.
S & F brass chromium plated towel Ring including apair of CP brass bracket coplete all as specified and directed.
S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified.
S&F in repair brass chromium plated soap dish, complete all as specified.
S & Fixed in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified
Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm.
S & F in repair Aluminium drapery Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-chareg
S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm mm dia ,in four storey building complete all as specified
S&F PVC (SWR) bends of any radius ( 110mm bore) complete all as specified Make prince
Dismantling of 75 mm dia cast iron pipe (soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified.
S & F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
Dismantling of 100 mm dia cast iron pipe (soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified.
S & F 100 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
Dismantling of 50 mm dia cast iron pipe (soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified.
S & F 50 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 75 mm dia (bore) pipe S&F in repair complete all as specified.
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100 mm dia (bore) pipe S&F in Repair complete all as specified.
S&F in repair 100mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.
All as per item no 74 above but 75mm dia (bore of pipe) bends
All as per item 74 above but fitted with oval access door for 100mm dia (bore of pipe).
All as per item 74 above but fitted with oval access door for 75 mm dia (bore of pipe)
S & F in repair 75mm dia (bore of pipe) branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access door, complete all as specified.
S & F in repair 100 mm dia (bore of pipe) branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access door, complete all as specified.
S&F in repair cast iron floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.
S&F stainless steel gratings 100mm bore size fixed with cement motarcomplete all as specified .
Demolition of brick work built in cement or cementlime mortar of any description including quoins,arches,pillars,etc., all asdirected.
M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straightor curved on plan exceeding 6 m mean radius all as specified and directed.
All As per item no 83 before but except bricks
Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.
M & L for 18-20 mm thick Machine cut kota single piece stone slab for steps or flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed complete
All as per Item No 86 above but in skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as slpecified and directed.
M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over 15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab mouldedand polished incl Screed bed CM 1::6 complete all as specified and as directed by the Engineer-in-Charge.
Demolition of reinforced cement concrete such as chajja,manhole cover parapet wall ,lintel up to 4.5 m span including hieght upto four storey building , in any position all as specified and as directed by Engineer -in-Charge.
S&f for form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.
S&F TMT steel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed by Engineer-in-Charge
M&L for Reinforced cement concrete 1:2:4 Type A-1 (20 mm graded agg) in shelves & similar items complete all as specified and as directed by Engineer-in-Charge
M&L for roof treatment as per the description below:- a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient then 10MM thick plastering CM 1:4 without using extra cement. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint .
M&L for rendering 15mm thick in cement mortar 1:4 with two coat of tape create mixed (1:2) with cement paste @ 500 gm per sqm as per manufacturere instruction in sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85/25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out, complete all as specified.
S & F in repairs kitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 90x60x25cm complete all as specified
Complete removal exising treatment of old surfaces of wall scrubbing by machenical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying 2-3 mm birla wall care putty Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash even and smooth with roller brush complete all as specified and directed.
M&L 3mm thick figured glass n exc 0.5 sqm each pane ordinary quality and glazing withoil putty or fixed with beads, all as directed.
Taking down carefully copper/aluminium point wiring (light/fan/ socket/power) complete from the wall by cutting/ chasing including fittings and fixtures such as switches, ceiling roses, pendants holder, regulators,sockets etc for credit and making good the disturbed surfaces of wall, floor etc complete all as specified and directed.
Taking down carefully sub main wiring of any description.
Taking down defective switch fuse main board /MCCB Enclosure/ distribution iron clad or sheet metal enclosure/ MCB DBs with MCBs of any capacity and make including wooden board etc complete all as specified and directed.
M & L for Point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia ) 1100 volts in new PVC concealed conduit and new MS steel terminal boxes not less than 1.6 mm thick of required size (factory made) terminal boxes and with top cover of 3 mm thick hylam sheet of white colour including one run of 1.5 SQMM FRLS 1100 Volts copper conductor cable (green colour) as earth continuity connected to common earth for one light point complete all as specified and directed by Engr-in-Charge for the followings:- Note : (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing/caping to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above. (iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.
(a) One light /Ceiling fan/exhaust fan/ bell point controlled by one switch.
(b) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on Ind board
All as per item No.101 herein before but with 4 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for Item 6 & 7 : (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing/caping to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above. (iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.
M&L switch piano flush type 5 amp SP one way ISI marked.
M&L socket outlet 5 Amps 5 pin flush type ISI marked
M&L switch piano flush type 15 Amp SP one way all as specified and directed by Engr in Charge.
M&L socket outlet 2 in 1,3 pin 5/15 Amps all as specified and directed by Engr in Charge. Make:-
Supply & Fix fan regulator electronic step type 5 steps piano type, one module connecting complete all as directed.
S&F ceiling rose, 3carbonate, isolated body with three terminals.
M&L bell electric (ding dong) 230 volt, SP all as specified and directed.
S & F sheet metal enclosure single pole and Neutral with a two pin earth plug top and socket complete with a MCB SP 20 Amp, "C" Curve 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.
S&F in replacement of LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
S&F in replacement of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.
S&F in replacement of LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. complete all as specified and directed.
S&F 45W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 80lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated with ABS body complete all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating. Make : Crompton/Raycold/Havells
S&F ceiling fan three blade, robust and reliable inverter motor (brush less DC Motor) powdered by ECM technology, BEE 5 star rating for energy saving ISI mark, rated Air delivery>220cum/min, service value>6 AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible coper cable pvc insulated of suitable length as specified and directed by Engr in Charge BLDC fan must operate on exisitng electronic fan regulator. Make : Crompton/Orient/Havells
Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of hole and copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.
S &F heavy duty exhaust fan 300 mm sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable and provision of hole and stranded copper conductor from ceiling rose to fan, length as per requirement at site.
S&F MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.
S&F MCB SPN32 to 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.
S&F MCB SP 6 - 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.
Supply, and drawing in concealed New PVC conduit not less than 20 mm dia medium duty incl 02 runs of single core 04 Sqmn (for main current& Neutra) and one run single core 04 Sqmm (As earth wire) of multi stranded FRLS conductor copper conductor PVC insulated unsheathed. 1100 votls, ISI marked for sub main wiring. Note: Three reins of cable & one run PVC conduit shall be measured on one run.
Supply, and drawing in concealed New PVC conduit not less than 20 mm dia medium duty incl 02 runs of single core 06 Sqmn (for main current & Neutral) and one run single core 06 Sqmm (As earth wire) of multi stranded FRLS conductor copper conductor PVC insulated unsheathed. 1100 votls, ISI marked for sub main wiring.
S&F factory made epoxy powder coated distribution board (MCCB DB) TPN 4 way vertical type, IP-43, protection made out of min1.6mm thick CRCA sheet, Fabricated, metal double door fixed to wall and suitable for universal monting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plated with knockouts and incl MCCB 100 Amps as incomer and confirming to IS : 8623 complete all as specified an directed
Supply and fix in repair MCCB 63 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.
Cutting the existing wall/removing existing steel bar to make a hole for fixing of exhaust fan size 300mm/250mm through packing of wooden ply to support the ventilating/air circulating fan including necessary nut and bolts of suitable size incl make good of disturbed surface complete all as directed by engr-in-charge.
M&L for preparation of old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of wall care putty 1mm thick on wall complete all a spcefied.
M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty complete all as specified and as directed.
Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work
M & L for snap grid ceiling with E - board ceiling tiles of size 600x600mm 4mm thick incl aluminium alloy anodised at edges angle 25x25x1.5mm and tee section 38x38x1.5 mm at other than edges both ways fixed with 4mm dia gi wire including two coats of oil bound distemper
S&F for 19/20mm thick Block board grade 2 quality interrior grade commercial type fixed with screws to timber frame work including teak wood leaping and necessary rebating for double shutter where required.
S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm)
M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads.
M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windowos with framed shutter including aluminium allow powder coated snap grill, handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted glass/frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed
S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including 5.5mm thick figured glass necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all specified and directed by Engineer-in-Charge
S&F MS butt hinges medium weight 100 mm size fixed with MS screws.
Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges/gutter to wall, fixed with self tapping screws as specified
Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified and directed.
M&L switch Modular type 6 Amps 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified.
M&L switch Modular type 16 Amps 230V AC complete all as specified and directed by Engineer in charge.
Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.
S&F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanized iron steel wire of 4mm dia by means of bolts nuts check-nuts and washers of galvanized iron or steel as shown in electrical plate No 5 of MES schedule Part-I connecting to earthing test point and testing on completion with including 15mm bore light grade GI protection pipe, RCC 1:2:4 type B1 20mm thick cover reinforced with 6mm thick dia MS bars 3 Nos both ways with lifting hook made out of 6mm dia MS bar, watering arrangement with funnel and wire mesh and 20mm bore light grade GI watering pipe, earthing lead from earth plate to eqipment to point (up to 7.5M long) common salt and charcoal filling, necessary excavation and earth work complete all as specified.
Schedule of Credit
M/S ANIL KUMAR
M/s SAAR ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .