SPL REPAIR OF BATHROOM BLDG NO. P-192 AND P-194 AT THE RAJPUT REGT CENTRE FATEHGARH

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in sunken floor, ground floors and paving in any thickness (below or above ground level) and removal the debris complete all as specified and directed.

M & L 25 mm thk cement conc. Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking up or down old unsv steel tubing and connections,20mm dia including cleaning for re?fixing or removal to store Complete all as specified and directed.

Taking up or down old unsv steel tubing and connections,15mm dia, including cleaning for re?fixing or removal to store Complete all as specified and directed by Engr in Charge

S&F GI tubes medium grade with all fitting fixed to wall and ceilling or laid in floor of 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fitting fixed to wall and ceilling or laid in floor of 15 mm bore of pipe complete all as specified and directed.

S & F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed.

S & F in repairs vitreous china squatting pan pattern (Orrisa Pattern) size 580 mm x 440 mm white with integral foot rests, 110 / 125 mm PVC (SWR) P- Traps and including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to fllor complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, wlhite with inlet, ball valve, float and handle including brackets 10 litre capacity complete all as specified and directed.

M&L for preparing previously untreated steel surfaces based materials of any description over 10cm width/ grith and applying two coats of Synthetic Enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F hold fasts flats iron Fe-290 Gde-E-165 complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450 X 350 X 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:4) finished even and fair without using extra cement, shade & design of tile as approved by Engr in charge complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each complete all as specified and directed.

S&F 3 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F Galvanized mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts bolts etc. complete all as specified and directed.

S&F in repair angle stop valves angle, cast copper alloy chromium plated fancy type, screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT Nut of length 450mm complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutter from frame ) exc 1.50Sqm but n exc 4.0 sqm each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length Complete all as speciifed and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws.

S&F factory made Steel Window/ ventilator 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed. Note: (Wire mesh and glass pan shall be measured and paid separately under appropriate item) .

S&F factory made steel window / ventilator 1.25 mm thick Box Type (primer coated) ERW hollow P section of size 60 mm x 25 mm. 1.25 mm thick sheet single rebated comprises glazed skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and maing good dismantled portion with using PCC 1:2:4 type B-1 using 20 mm graded stone aggregate four nos for each window inlcuidng following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed. Note: Glass pan and painting shal be measured and paid separately under appropriate item.

M&L for preparing new steel surface of any description over 10 cm width / girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F 150 mm, long, Aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm long , extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

S&F Aluminium anodised sliding door bolt 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in two layer (10+5mm) in CM (1:4) on fair surfaces ( height upto 10 mtr) of brick or concrete work height up 6 RM and finished even & fair with using WPC on walls complete all as specified and directed. (Note: WPC measured and paid separately)

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint complete all as specified and directed

M&L for preparation of new plastered surfaces and 3mm thick wall care putty on wall and applying two coats of OBD complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed

Dismantling wrought iron / Mild Steel work of any description not otherwise provided for complete all as specified and directed.

S & F MS joist channel , angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) trusses etc any type framing including purlins and rafters etc complete all as specified and directed.(Fe 410-W Gde E-250 Quality A)

S&F for Expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

Dismantling of water tanks capacity exc. 500 ltrs and n.exc. 1000 ltrs and removing to store complete all as specified and directed.

S & F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 20 mm gun metal globle or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection finish without using extra cement complete all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white including Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as specified and directed.

M&L for water proofing treatment on sunken floor/wall including dismantling of old u/s treatment and plaster with the following specification complete all as specified and directed- (a) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPC in as per manufacturer instruction (b) Apply one coat bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (c) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (d) Laying polymeric water proofing memberance weight not less than 3.0 Kgs/Sqm as per manufacturer instructions confirming to IS (e) One spout of 40mm GI pipe length 0.45 M shall be provided in sunken floor (f) Filling of sunken floor with PCC 1:5:10 upto height directed (g) fixing of trap as per site requirement

M & L Rendering 5mm thick in CM (1:3) on ceilling concrete surfaces to be finished even and fair complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia AC or PVC in cement mortar incl cleaning sludge/wastage etc at shaft portion of bldg where new pipes to be fixed complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls / floors etc complete all as specified and directed.

S & F in repair tubular towel rail 20mm dia 60 cm long between flange, brass chromium plated including bracket complete all as specified and directed

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed

Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc for one light / fan / exhaust fan point controlled by one switch complete all as specified and directed Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

All as per item No.59 above but for one 5 pin 5 Amp socket combination point on an independent board complete all as specified and directed..

All as per item No.59 above but for one 5 pin 5 Amp socket point controlled by one switch on same board complete all as specified and directed..

All as per item 59 here in before but for one 16 Amp 6 Pin switch socket combination independent with 4 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F Switch Piano flush type 5 Amp single pole one way complete all as specified and directed.

S&F Socket 2 in 1, 3 Pin 6 Amp complete all as specified and directed.

S&F switch socket combination 2 in 1, flush type 6 Amp 5 Pin complete all as specified and directed.

S&F switch socket combination 2 in 1 flush type 16 Amp 5 Pin complete all as specified and directed.

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)

Supply and fixing in repair MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

S&F in repair MCB SPN 40 Amp 240 volt 'C' curve complete all as specifed and directed.

S&F in repair of MCB of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F in repair of LED lights fitting 4 feet, 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair of metal plug & socket DB with metal plug and MCBs double pole and neutral enclosere with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete all as specified and directed.

M/S S P CONSTRUCTION (BID ID -3265366)

ASHISH SHARMA (BID ID -3260423)

M/S DEEN ENTERPRISES (BID ID -3265304)