Providing rubber matting and other miscellaneous works at weigh bridges of Yekona Sub Area of Majri Area.

Amount

Providing and fixing at site rubber flooring of minimum 10 mm thickness of appropriate colour, UV protected, water and weather proof having brand equivalent to Amazon Basics / Decathlon inclusive of all fitting via appropriate glue, transportation cost and other handling charges all complete as per the direction of Engineer-in-charge.

Providing and fixing powder coated aluminium partition including doors with locking arrangement, including aluminium frames shutters and glass embedded in gasket rubbers including insertions into etc. all complete and as per instruction of Engineer-in-charge.

Assistance in shifting of material from weigh bridges including placing back in same position after fixing of rubber mat as per instruction of Engineer-in-charge by providing 3 numbers of labour per day.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources).

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Total impact of GST for the purpose of CTC

TSN ENTERPRISES

Shiladevi Asit Yadav