Replacement of Damaged and Tilted Boundary Wall of Plot No. 1399-1400 and 1497- A, sector 35 B, BBMB, Chandigarh.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.( As per CSR Pb 2020 item No. 6.6)(T/R)

Dismantling concrete (b) Cement concrete plain 1:4:8 or 1:5:10 ( As per Pb CSR item No.8.6b) L/R

Dismantling brick work tile, masonary or tile lining (b) in cement .( As per Pb CSR item No.8.5b) L/R

Cement concrete 1:5:10 (b) With stone aggregate 40mm gauge (ii) mixing by mechanicaly by means using mixer volumitic type.(As per CSR item No. 10.9 b (ii) T/R

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth (Pb. CSR Ref. No. 11.7) (T/R)

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.(Pb. CSR Ref. No. 11.8)

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded(Pb CSR item No.10.26) (T/R)

20mm thick cement plaster 1:5 in two coat work (Pb CSR item No. 15.21) (T/R)

Cement pointing 1:3 deep variety (Pb. CSR Ref. No. 15.60) (T/R)

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm (Pb. CSR Ref. No. 16.59)

Cement concrete 1:2:4 (a) With stone ballast or shingle (ii)mixing by mechanical means using concrete mixer volumetric type(As per CSR item No. 10.13 a (ii) T/R

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position (As per CSR item No. 18.4 (ii) T/R

Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (d) Polycarbonate sheet 2mm thick solid type(As per CSR item No. 13.27 (v) (d) T/R

Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat(As per CSR item No. 18.31) T/R