- Providing, Fixing and Placing record/files storage unit (optimizer), shutter on ward robe and other furniture at Basement of Kar Bhawan Jaipur

Amount

Table with Moveable 3 drawer Padestal with wheel Size : 1500 x 900 x 750mm (L x W x H) Pedestal size : 380 x 450 x 700mm (L x W x H) Supply of Table with following specifications Table top 25Mm Thick Prelaminated Particle Board of Action Tesa/Green Lam / Merino 2.0mm thickPVC edge banding of Reahu/Dholkin/Spectrum supported On 38X25(Tolerance + & - 2mm) Square Pipe, wall thikness 2.0mm Open Desk Metal Understructure of Branded MS square tube. All Padestal 18mm Th. Prelaminated Partical Boardwith 2.0mm thickPVC edge banding of Reahu/Dholkin/Spectrum . All necessary Hardwares Such as lock &Handels Of Hettich/Hafele as per size required. Hardware and fitting of Hettich/Hafele with 2 Year Warranty on manufacturing defect.

Table with Moveable 3 drawerPadestal with wheel Size : 1200 x 750 x 750mm (L x W x H) Pedestal size : 380 x 450 x 670mm (L x W x H) Supply of Table with following specifications Table top 25Mm Thick Prelaminated Particle Board of Action Tesa/Green Lam / Merino 2.0mm thickPVC edge banding of Reahu/Dholkin/Spectrum supported On 38X25(Tolerance + & - 2mm) Square Pipe, wall thikness 2.0mm Open Desk Metal Understructure of Branded MS square tube. All Padestal 18mm Th. Prelaminated Partical Boardwith 2.0mm thickPVC edge banding of Reahu/Dholkin/Spectrum . All necessary Hardwares Such as lock &Handels Of Hettich/Hafele as per size required. Hardware and fitting of Hettich/HafeleWith 2 Year Warranty on manufacturing defect.

Revolving Chair Chair- Supply of Chairs with following specifications Back- High back Mesh . Height of back from the ground is Min - 1090mm. Height of back is 700mm. Width of back is - 490mm. Seat to back height is - 680mm.Passed the Load test , Seat - PU 40 (D) moulded cushion with 12mm ply . Seat width with arm is - 630 mm .Seat width without arm is - 470mm . Seat depth from the back is -450mm. Comes with Fabric/Leatheriteoptin with over 50 color option. Arms -Adjustable arms with PP pad. Seat to Armrest height of the chair is - 170mm. Width of PP pad is 90mm and length of PP pad is 260mm. Mechanism- Synchro single lock Mechanism with gas lift for seat and with height adjustment. Base - Powder coated black Metal base with twin wheel castors/Nylon Stopper .Total area of base is 600mm.Passed the load test of 1200 kg applied twice for the duration of 1 minute structural breakage or crakes has happened. Castor - Snap fit Castor are used . Load of 102 kg placed in a hopper and mounted on the pedestal base with castors free to rotate and swivel, chair is pulled/pushed to and with a stroke length of approx. 762mm over an obstacle and then 98000 cycles without the obstacle at the rate of 10 + /2 cycles per minute , no adverse impact on the movement of castors.

Revolving Chair Chair- Supply of Chairs with following specifications Back- High back Made of synthetic mesh with lumber support and headrest. Height of back from the ground is Min - 1090mm. Height of back is 700mm. Width of back is - 490mm. Seat to back height is - 680mm.Passed the Load test , Seat – made of PU foam with foam mesh upholestry . Seat width with arm is - 630 mm .Seat width without arm is - 470mm . Seat depth from the back is -450mm. Comes with Fabric/Leatherette optin with over 50 colour option. Arms -Adjustable arms with PP pad. Seat to Armrest height of the chair is - 170mm. Width of PP pad is 90mm and length of PP pad is 260mm. Mechanism- Synchro Mechanism in 2mm thick steel sheets with upright locking and back tension adjuster and gas lift for seat and with height adjustment. Base - made of nylon with rubber coated twin will casters .Total area of base is 600mm.Passed the load test of 1200 kg applied twice for the duration of 1 minute structural breakage or crakes has happened. Castor - Snap fit Castor are used . Load of 102 kg placed in a hopper and mounted on the pedestal base with castors free to rotate and swivel, chair is pulled/pushed to and with a stroke length of approx. 762mm over an obstacle and then 98000 cycles without the obstacle at the rate of 10 + /2 cycles per minute , no adverse impact on the movement of castors.

Chair (Peacock ) Chair with low back support chair, chair base made out with wooden finish and chair seat and back structure duly made with medium density foam covered with fabric tapestry chair having two nos. of arm made with wooden finish.

Providing and placing Green guard certified 3 Bay Optimizer As per Lauout , Overall Dimensions of SD - 3 Single Static Drive Cover Unit 3 Bay(U/C + Fittings + Cover) shall be 2745mm(W)x457mm(D)x2080mm(H) = (4 Nos) ,Single Last Drive Cover Unit 3 Bay(U/C + Fittings + Cover) shall be 2745mm(W)x457mm(D)x2080mm(H) = (4 Nos) and Twin Mobile Single Static Drive Cover Unit 3 Bay(U/C + Fittings + Cover) shall be 2745mm(W)x 914 mm(D)x2080mm(H) = (25 Nos). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns .The Movements shall be Drive Type configuration : In case of D2 & D3 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size .For D3 each movable undercarriage shall be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling and 4 antifriction ball bearing for guiding between rail . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 15 for SD3. Fascia(tiling) 3 tile pattern fascia option on drive side panel plus 3 tile pattern fascia on non-drive side panel plus 3 tile pattern fascia option on back panel of single last plus 3 tile pattern fascia option on back panel of single static . The tiles are held together by stiffeners & fasteners in 2 vertical metal trims. Channel Overall Dimensions of Channel shall be 99 feet (L) . Guide channels shall consist of 'J' section 2 mm thick & 25 mm square bright bar - both connected by screws . Prior to the embedding of the guide channels with the help of raul plug & screw OEM Shall have ISO Certificates-9001:2015, ISO18001:2007, ISO 14001:2015, and. Optimizer test reports of NABL Accridated lab/Government lab need to be submitted at the time of execuation.

Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge