Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Documents submitted as per NIT |
| 2 | Accepted-Technical | Accepted-Technical Documents submitted as per NIT |
| 3 | Accepted-Technical | Accepted-Technical Documents submitted as per NIT |
| 4 | Rejected-Technical 13 1 KRISHNA ROY PARA P O KHAGRA DIST MURSHIDABAD PIN 742103 | KHAGRA | MURSHIDABAD | WEST BENGAL | 742103 | Rejected-Technical Documents not submitted as per NIT |
| 5 | Rejected-Technical | Rejected-Technical Documents not submitted as per NIT |
Tender Value
₹3.2 L
EMD Value
₹6,464
Closing Date
25 Aug 2026, 12:00 pmClosed
AE,KWSD-I,PWD
N.S.Building
Thorough repair and renovation of roof top of existing Server room block to match with the newly constructed Lift portion (Roof top) along with other allied works at Rabindra Sadan Complex during the year 2026-2027
2026_WBPWD_5018463_1
WBPWD/KWSD-I/AE/eNIT-15/26-27
Open Tender
CIVIL WORKS
Percentage
15 days
Rabindra Sadan
Please refer Tender documents.
4 documents required · 4 mandatory
₹6,464
Yes
24 Sept 2026
12 Aug 2026
27 Aug 2026
18 Aug 2026
25 Aug 2026
18 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old damaged tarfelt from the roof, parapet etc. preparing the roof surfaces by removing all spoils, blisters, moss etc. from the working site and disposal of the same beyond the compound and cleaning the site in all respect as per direction of Engineer-in-Charge. | 123.5 | Sqm. | 12 | ₹1,482 |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.
In ground floor including roof.
(a) upto 150 mm. thick | 7.92 | Cum. | 1,039 | ₹8,228.88 |
| 3 | Brick work with 1st class bricks in cement mortar (1:6)
(b) In superstructure, ground floor | 1.03 | Cum. | 5,811.88 | ₹5,986.24 |
| 4 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). | 97.27 | Sqm. | 309 | ₹30,056.43 |
| 5 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | 27.09 | Sqm. | 19 | ₹514.71 |
| 6 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] | 27.09 | Sqm. | 87.58 | ₹2,372.54 |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.
a) Pakur Variety | 1 | Cum. | 5,455.25 | ₹5,449.79 |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
(i) With 1:6 cement mortar
(b) 20 mm thick plaster | 134.92 | Sqm. | 179.65 | ₹24,238.38 |
| 9 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermofusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer-in-Charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).
Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse) | 154.12 | Sqm. | 407 | ₹62,726.84 |
| 10 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
A) UPVC Pipes:
(ii) 110 mm. Dia. | 7.3 | Mtr. | 251 | ₹1,832.3 |
stage.html
html • 0.13 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
2911.pdf
Tender Documents • 1.86 MB
BOQ_5089498.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .