PROVN OF VEHICLE PARKING SHED FOR B VEHICLE AT JOD LINE (P-44) OF COD AND PROVN OF CATTLE CHAIN LINK FENCING FOR CHILDREN PARK (NAVDEEP ENCLAVE, MAP LINE), ANANT NAGAR COLONY PLAY GROUND AND RAMA RAGHOBA COLONY AT COD UNDER GE (EAST) JABALPUR

Amount

M&L for Excavating over areas, n.exc 1.50m deep & getting out in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50cum in hard/dense soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering & removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50cum in soft/loose soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering & removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for removing surplus excavated material (Soil) to a distance exc 250m but n.exc 500m & depositing where directed at a level n.exc 1.5m above the starting point, including spreading complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge n.exc 63mm, deposited, spread & levelled in layers n.exc 15cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for Moorum/Red Bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled & rammed including watering complete all as specified and directed.

M&L for Cement Concrete, 1:3:6, Type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement Concrete, 1:4:8, Type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing Cement Concrete, 1:2:4, Type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F of Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F of Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm & n.exc 15cm, diameter of neck 11 to 15mm complete all as specified and directed.

S&F of mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete quality conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint & apply two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for Cement Concrete work in pavement/hard-standing of flexural strength 40 Kg per Square Centimetre in field using 400 Kg of cement per Cubic Metre, thickness of concrete 25cm or less complete all as specified and directed.

M&L for forming construction joint 90mm deep x 10mm wide filled with grade 'A' sealing compound complete all as specified and directed.

Schedule of credit amount of Rs. NIL to be deducted during AOC.

M/S Chandrakant Sonkar (BID ID -3061118)

M/S A.P.M. CONSTRUCTION CO. (BID ID -3066398)

M/S N K SONKAR (BID ID -3074364)

M/s PARASRAM MULCHANDANI (BID ID -3066435)

M/S CHETAN PRAKASH GOYAL (BID ID -3074391)

LAL SINGH & SONS (BID ID -3066501)

m/s R K SETHI (BID ID -3074657)