SPL REPAIR TO BLDG NO P-21 (OR LIVING), HARD STANDING AND DRAINAGE SYSTEM AT BACK SIDE OF BLDG NO T-11 AT OUTPOCKETS UNDER GE DINJAN

Amount

Surface excavation not exceeding 30cm deep and averaging depth 15cm deep and getting out all as specified.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading in layers n. exc 25cm, levelling, watering and well ramming as in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M & L for Hardcore of broken brick aggregate of gauge n.exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base of floors and mass concrete, etc complete all as specified and directed.

M & L for 100mm thick Plain cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in hard standing, finished even smooth using extra cement and making impression of expanded metal whilst the cocrete is green complete all as specified and as directed.

M & L for forming construction joint 10mm wide and full depth of concrete pavement, filled with sealing compound Grade 'A' complete all as directed.

M&L for Brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 half brick thick wall complete all as specified and directed.

M & L for Plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in surface channel, drains etc complete all as specified and directed.

Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed. (Inner girth only be measured)

M & L for coninuous brick edging with sub class 'B' bricks, with width equal to width of brick, laid dry on end vertically complete all as specified and directed.

Dismantling timber scantlings 40 Sq.cm and over in section (unframed work , in any positionrail, post, purlin, rafter etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone agg) as in sub base for floor etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in any description including cutting reinforcement as required to facilitate demolition of concrete complete all as specified and directed.

Taking down chowkats or frame, n.exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exceeding 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges complete as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L for second class hardwood, scantlings, clean sawn, in unframed work complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:2:4, type B-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in beam, lintel, cantilevers etc complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:2:4, type B-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in slabs supported on wall, roof beams etc complete all as specified and directed.

M & L for use & waste Form work to soffits and sides lintel beam for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste Form work to soffits and sides of roof slabs for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste Form work to sides, edges of roof slabs or the similar works, for flat rough finished surfaces of concrete exc 10cm but not exc 20cm wide complete all as specified and directed.

S & F TMT steel bars 10mm dia, and over cut to length, bend to shape required, including cranking, bending spirally as in nibs, stirrups, spacers and binders binding with and including providing mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F TMT steel bars 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally as in nibs, stirrups, spacers and binders binding with and including providing mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F pressed steel frames for doors local work shop made of size 125x60mm with one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including necessary fixing lugs, 100mm butt hinges, lock strike plate, shock absorber etc and PCC filling of hollow section using Plain cement concrete 1:3:6 type C1 complete all as specified and directed.

M & L for 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of 12mm thick veneered particle board medium density with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed, Sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a).

S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded complete all as specified and directed in SSR Part I Section 8 clause 8.24 (a).

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting with one shop coat of zinc chrome primer complete all as specified and directed.

S & F Steel ventilator with top hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting with one shop coat of zinc chrome primer complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S & F Mild steel small articles using flat iron of size 25x3mm thick such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290, Gde E-165 complete all as specified and as directed.

S & F 100 mm size, butt hinges, stainless steel complete all as specified and directed.

Supply and fixing 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed.

S & F 125 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F aluminium bow handles, cast type, anodised size 100mm complete all as specified and as directed.

S & F Mild Steel sliding door bolts, 250 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, etc complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two layer (10mm + 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick in cement mortar 1:4 on concrete surfaces as in ceilings (sunshed, chajja, fins etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rending in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finish even and smooth without using extra cement complete all as specified and directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and directed.

M&L preparing newly plastered surfaces of walls and applying three coats of white wash

M&L preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed

"Supply only" liquid water proofing compound complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)

S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and directed. (Colour of ridge shall be same colour as that of sheet used for roof)

S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M & L GI frame work for false ceiling seamless comprising of galvanised iron perimeter channel 0.55mm thick with two unequal flangeds of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermadiate channel 0.90mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre using 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long includin providing 12mm thick seamless calcium silicate ceiling made out of 1800X1200mm size board of siliceous and calcareous materials reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screwshaving philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and directed. Make of E-Board :- Eternit Everest / lafarge/ Armstrong or equivalent as approved by GE

M & L for applying two coat of oil bound distemper over a coat of primer on newl surfaces of seamless calcium silicate ceiling al as directed.

M & L for preparing surfaces of wood and wood base materials, any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

M & L for preparing plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer over a coat of wall care putty in two coat (minimum 1mm thick + 1mm thick) complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation new external plaster surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (Apex ultima superior quality) paint over a coat of primer as per manufacturer's instruction complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 8 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles 7 to 8 mm thick area of each tile not less than 0.06 sqm on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:3 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L Virified Ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc, including 15mm thick screednbed in cement mortar (1:4) set and jointed in near cement slurry and pointed in white or coloured cement to match white or coloured cement to match the existing complete all as specified and directed

Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc including 15mm thick bedding in cement mortar (1:4) set and jointed in neat cement slury and pointed in white or coloured cement to match in coloured tile etc all as directed

M&L glazed, coloured, ceramic, tiles of size (300mm x 200 mm) x 6 to 7 mm thick, on vertical surfaces, including 10mm thick screed bedding in cement mortar (1:3) such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed

M & L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded broken stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore drain pipe complete all as specified and directed

Supply, laying, connection and testing, steel water tubing, galvanised, medium grade with all fittings, laid in trenches or under road etc complete all as specified and directed for 50mm bore or pipes

All as per item No 76 above but 40mm bore or pipes complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and directed.

M & L for Sand filling under floor with clean dry sand complete all as specified and directed.

M&L for salt glazed stoneware 150mm drain pipes laid in trenches and jointed as specified complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with PVC seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F Vitreous China urinal, half stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. (Make: Parryware Cat No. or equivelant of make Hindware/Cera)

S & F 15 mm bore, Stop valves, cast copper alloy, chromium plated, with long shank and cup,fancy type (concealed type) screwed down, high pressure, with capastan head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 15 mm bore, bib taps, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) (bearing ISI marked), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed.

S & F 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

S & F swival shower of PTMT 15mm bore (minimum weight 40 gms) of PTMT any colour (minimum wt 40 gms) complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S&F in repairs, 110 mm bore PVC (SWR) Soil, vent pipes, single socketed in any length with rubber ring joints laid in wall for rainwater, etc complete all as specified.

S&F PVC (SWR) 110 mm bore bends any radius complete all as specified.

S&F in repairs, 75mm bore PVC (SWR) soil, vent pipes, single socketed in any length with rubber ring joints laid in wall for rainwarter etc complete as specified.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed.

S & F in repair 75 mm dia, PVC (SWR) floor trap, with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) vent cowl fixed with solvent cement complete all as specified and directed.

PVC (SWR) branch piece, 110 mm double (double Y) equal or unequal

S&F 20mm bore, gun metal gate valve, with iron wheel head screwed both ends for iron pipe as specified

Cutting the existing 80mm GI pipe line and making necessary arrangement for taping of new pipe line of 50 mm dia including threading, welding and all required accessories.

M&L for providing plain cement concrete 1:2:4 (Type B1, using 20mm graded agg) as in copings complete all as specified and directed

M&L for 75mm thick, plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging" also fastening and fixing complete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150 x 100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed

M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash as specified and directed

M&L preparation of old decorated plastered surfaceas of walls and applying one coat of distemper oil emulsion on chalk whiting plastered surface as specified and directed

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed

M&L uprooting for vegetation growth on walls or roof surfaces and applying acid treatment and making good disturbed surfaces in super ficial area exc 150 sqcm and n exc 400 sqcm and avg depth 10 cm by using PCC 1:12:4 type B0 using 12.5 mm graded stone aggregate or plastering in CM 1:3 as required and finishing the surfaces to match with the existing surfaces complete all as specified and as directed

S&F in repair of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

Demolition of cement concrete of any descriptin and in any positin not otherwise specifically provided for

M&L for PCC 25 mm thick type B-0, 1:2:4 (12.5 mm graded aggregate) as in top of window chajjas etc mixing with integral water proofing compound and making good slope finishing even and smooth without using extra cement complete all as specified and as directed

S&F in repairs, plastic water closet seat cover for pedestal pan, white/coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

S&F in repairs, 15mm bore, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high, pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed

S&F in reparis, 15mm bore, stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions as specified

S&F in reparis, 15mm bore stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down high pressure, with crutch or butterly handle, screwed both ends for iron pipe or for unions

S&F in repairs 15mm bore, bib taps cast coopper alloy, chromium plated, bib taps withcrutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs harrison rails, mildsteel, chromium plated, with fixing brackets stops, rollers etc as in curtain rail all complete as specified and directed

S&F in repairs 32mm PVC waster pipe for wash basin complete all as specified and directed.

S&F shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (Min weight 40 gms) complete all as specified and directed.

S&F in repair CP toilet paper holder complete all as specified and as directed

S&F in repair CP angular stop cock complete all as specified and as directed

S&F in rerpair CP health faucet complete all as specified and as directed

S&F towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats

S&F framed brackets of angles or tees with web and flages cut to shape, drilled & countersunk for scew, including bending & welding angles as necessary,gusket plates, riveting etc. n. exc 10kg each brackets, confirming to Fe.290 Gde-E-165 (Brackets over 10kg each to be measured under 'structural steel')

S & F ceiling fan 1200 mm sweep 230 volt, BEE 5 star rating including providing MS fan hook made out of 16mm dia bar/ flat iron hanging, connecting using 3 core 1 sqmm flexible wire complete all as directed. Make of fan : - Havells model No ES-50 or equvalent of make Orient/Bajaj/Usha as approved by GE.

Supply, Installation and testing of Deep freezer hard top, 400 Litre capacity having double door complete all as specified and as directed. (Make: Godrej Model No DpFrz GCHW410RDxB htop or equivalent model of LG/Samsung/Whirlpool)

Supply and fix refrigerators, electric driven (single phase), capacity 311 Litres, frost free double door (Make Godre model name RT EON 311 P 3.4 silver Meadows or equivalent model of samsung/Whirlpool/ LG complete all as specified and directed

Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 V with output voltage stabilized at 230 V with accuracy of + 2.5% and of cap 2.0 KVA (Make : Venus, Model : VMR-200 V3 or equivalent model as approved by GE

M&L sub main wiring for circuit/submain wiring alongwith 2x2.5 Sqmm + 1x 1.5 Sqmm sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required.

S&F metal plug and socket with MCB and steel enclosure 20 Amp, SPN MCB metalic P&S complete all as specified and as directed.

Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) complete, including unserviceable fitting such as switches, ceiling roses, pendants, regulators, sockets, etc and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), FR PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc) complete fixed to walls/ceiling etc with and including 1.5 Sqmm (nominal area) FR PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC termainal box (sunken type) switch board fixed with suitable sizes cadmium plated iron screws and washer etc for mounting switches, sockets, regulators etc complete for one light/ceiling fan/exhaust fan/bell/buzzer point controlled by one, one way switches complete all as specified and directed.

All as per item No 135 above but one 5 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and directed.

All as per item No 135 above but for one 3 pin switch socket combination, 5 Amps on independent board complete all as specified and directed.

All as per item No 135 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 15 Amps switch socket combination on independent board complete all as specified and directed.

S&F switch piano, 5 Amps single pole, flush type one way 230 volts complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch socket combination, 2 in 1, 5 Amps, flush type, 240 volt complete all as specified and directed.

S&F switch socket combination, 5A/16A, 5 in 1, 240 volts, flush type complete all as specified and directed.

S&F lamp holder, insulated body with back plate suitable for batten fittings including 9 watt LED bulb complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type 230 volt 5 speed control and connecting up and fix position, complete all as specified and directed. Make : ANCHOR/Legrand/Havells or equivalent

S&F Regal batten holder for LED tube (single side connection) fitting with ultra bright LED tubelight (single side connection) with very high efficacy to give glare free light with necessary connection complete all as specified and directed. Make : Havells/HPL/BAJAJ

S&F 20 watt cub LED street/security light fitting comes with pressure die cast housing, prismatic polycarbonate diffuser, LEDs with secondary optic and IP65 protection including GI braacket of 32 mm bore n. less than 1 mtr complete all as specified and directed. Make : Bajaj Cat No BCLST 20W LED or equivalent model of HPL/Havells

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed.

S&F factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incoming end, SPN, 8 way, 240 Volts, 200 Amps suitable for housing MCBs complete all as specified and directed.

S&F MCB, SPN, 240 Volts, 5 to 32 Amps, 'C' series, 10 KA capacity ccomplete all as specified and directed. Make : Legrand, Cat No. 408609 to 408617 or equivalent make as per list of manufacturer

S&F MCB, 'C' series, SP, 240 Volts, 5 to 32 Amps, 'C' series, 10KA capacity complete all as specified and directed. Make : Legrand, Cat No. 408587 to 408595 or equivalent make as per list of manufacturer

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 350 x 300 x 50 mm deep, including taking downn old unserviceable one complete all as specified and directed.

M&L earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground vertically to a depth not les than 2.25 m below ground level with the top edgeof earth plate at depth not les than 1.5 m below ground level connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in ElectricalPlate No 3 of MES Schedule Part I and testing complete including taking down old one/dismantling complete all as specified and directed.

Taking down and refixing of ceiling fan 1200 mm sweep 230 volt including hanging arrangement of fan under different roof with considering the effective air circulation on carpet area and made out of heavy duty MS rod/flat hook etc making connection by using 3 core 1 Sqmm flexible wire complete all as specified and directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm, 2core complete all as specified and directed.

M&L for sand cushioning for protection of cable all as specified and directed.

Supply and laying well burnt bricks, sub class "B" bricks laid breath wise along length of cable in trenches for cable protection laid for UG cable protection all as specified and directed.

Supply and lay tube GI light grade 25 mm size for protection of cables all as specified and directed by the Engineer-in-charge.

Labour for Horizontal Boring Road/Foot path, not exc. 15 mtr in length by any mathod for 40 mm dia GI pipe complete all as specified and directed.

Shree Trilok Electric Corporation

M/S CHANDAN ENTERPRISE

Construction House

FREEZCON

Bimal Trading Company