PROVISION OF DEFICIENT PERIMETER WALL ALONG THE RESIDENTIAL AREA

Amount

Site clearance as cutting of vegetation/bushes/shrubs of any type Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground and removing of debries to a distance not exceeding 50 metre complete all as specified and directed.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for foundations etc., complete all as specified and directed.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in soft/ disintegrated rock for foundations etc., complete all as specified and directed.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard rock for foundations etc., complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation, mass concrete etc complete all as specified.

Removing excavated surplus soils not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated hard rock not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft disintegrated rock complete all as specified and directed.

M&L for RCC M-30 design mix in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-30 design mix as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-30 design mix in Beams, cantilevers, Bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for form work to sides of concrete foundations, footings, sides and soffits of plinth beams and similar work for rough finished surface of concrete complete all as specified and as directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete all as specified and as directed.

M&L for form work to sides and soffits of RCC floor or roof beams, beam hunchings, girders and lintel exc. 1.50m spanning to plain rough finished surfaces of concrete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L for mild steel TMT bars 5 to 10mm dia cut to length, bend to shape including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for stirrups complete all as specified.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius and built in CM 1:6 complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement mixed with integral water proofing compound by 3% weight of ceemnt complete all as specified. Note: WPC shall be measured and paid separately.

Supply only Integral Water Proofing Compound

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed.

M&L preparation of new plastered surface and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified.

M&L for MS work in post and struts in fencing including cutting top to shape as drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting or welding etc., and similar work conforming to Fe-290 Gde E-165.complete all as specified and directed.

M&L for MS work in Plates (plain or chequered) channels, square cut or otched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-290 (Gde E-165) quality B complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Cutting holes into or through brick walls built in cement mortar to a depth of 20cm for a superficial area n.exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

M&L for 110mm dia PVC pipes single socket in any length with rubber ring joints laid in trenches/walls complete all as specified and directed.

P Govinda Reddy Infrastructure (BID ID -3288798)

M/S ANIL KUMAR (BID ID -3288368)

S V S ENTERPRISES (BID ID -3289351)

bholanath bera (BID ID -3286869)

Mahamaruti Constructions (BID ID -3289258)

Atish Builders LLP (BID ID -3289599)