Renovation /Repair including Distempering and allied items for PHE Sub Division Qazigund

Amount

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing of 12mm thick plywood to damaged Almeras of Sub- Divisional office Qazigund including all carriages complete job

Supply of 01 No. Locker 24 gauge MS sheets of size 0.83/1.83 Mtr. Of Godrej quality as per the dircetions of Engineer incharge for Sub Divisinal office

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. (Two or more coats on new work)

Providing and fixing of Hinges 04 No. C.P mixer for bathroom of standerd Quality and 100mm dia tower bolts, 04 No. for windows ,06 No. LED lights for Sub Division complete job

Refixing of Gate by way of Welding to Hinges, cutting of Angle pieces for making separate door for Sub Division Office, fixing of 100mm dia GI pipe pillar in 0.30x0.30x0.45 cement concrete in 1:2:4 mix and 02 No.Locks(reputed make) complete job.

Providing and Fixing of C.P brass Rods (curtain rods of 1.25 mm thick) 20mm diameter with brackets for Executive Engineer office.

Curtain Rods with brackets.

Kerwal of 04. No. wooden office chairs complete job.

Repair of 04 N0. wooden office chairs complete job.Including new wood if needed.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in?charge:1:3:6 or richer mix (i/c equivalent design mix)

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Pink plain marble

Dismantling of existing old mechanical quarter at Divisional premises including Staking of serviceable material and disposal of unserviceable material as per directions f Engineer incharge. The serviceable dismantled material so retrieved from the structure will be returned to Divisional store. Complete job.

Providing Installation teting and commissioning of Area lighting 120 watt. LED (street Light type).The LED shall have pressure die cast Aluminum housing with power coated finish and having Ingress protection upto (ip-68). The LED shall be properly fitted on the arm of the pole and connected to the copper make SYSKA SSKSL-120 or equlant to havels.

Providing laying and connecting of 2Cx10mm2 XLPE Aluminum Armoured cabe from the connector of high mast pole to the Stabilizer. The Job includes underground laying of cable through 2" dia. HDPE heavy duty pipe, including bends etc. as per requirement and directions of the site incharge make(Havels/Gloster.

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Providing laying of vitrified floor tiles of size0.60x0.60 of approved brand including all Carriage complete job.