RENOVATION TWO CLASSROOM OF ACADEMIC BLOCK IIML NC

Amount

Civil Works ANNEXURE –A

Code No-13.41 Distempering with Plastic Emulsion Paint with Primer of approved brandand manufacture to give an even shade.

Code No-13.41.1New work (two or more coats) Paint.

Code No-13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Market Rate.Kota Stone Floor cutting and Distmanting all work material and stacking of serviceable material with in 1.5Km lead as directed by Engineer-in-charge.

Code No- 8.18 Stone work (machine cut edges Veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing and polishing Complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately).

Code No-8.18.1 Kota stone slabs exposed face dressed and rubbed.

Code No- 8.18.1.1 25 mm thick

Code No- 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeat all levels.

Code No-8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

Code No-8.2.1.1 Area of slab upto 0.50 sqm

ANNEXURE –B

Code No- 10.25 MS work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Code No-10.25.1Table Frame in Structure 75 X 40 mm Rectangular Carbon Steel Hollow Section Thickness @2.6 mm YSt 210.

Code No-9.168 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)

Code No-9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Code No-9.127.1 (1.5 mm thick)

Code no-8.8 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.

Code No-8.8.1.3 Fastener with threaded dia 16 mm

Code No-12.50 Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Electrical ANNEXURE- C

Supplying and fixing of fire-retardant PVC steel reinforced flexible conduit pipe size 25 mm joined with connector as required.

Supplying of XLPE insulated PVC sheathed, armoured, aluminium conductor(A2XFY), LT Cable of 1.1KV grade of following sizes; 4.0 core 16 sq.mm.

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required 2 x 2.5 Sq. mm + 1 x 2.5 Sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25mm

Supplying and fixing of modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. (For table top as per approved sample) 15/16 amp SP Switch

Supplying and fixing of modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. (For table top as per approved sample) 6 Pin 15/16 amp Socket Outlet

Supplying and fixing of following sizes/module, GI/PVC box along with modular base & cover plate for modular switches in recess etc. as required. (For table top as per approved sample) 6 module (200mm x 75mm)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4+12), Double door IEC 61439

Supplying and fixing following rating, four pole, 415V, isolator in the existing MCB DB Complete with connection, testing and commissioning etc. as required 63 Amps

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and making end termination with brass compression gland and aluminium lugs for following size of conductor cable of 1.1KV grade as required 4 x 16 sq. mm (28mm)

G Tech Solution (BID ID -3256099)

ADITI CONSTRUCTIONS AND CONTRACTORS (BID ID -3257509)