Differential Scanning Calorimetry

Amount

Differential Scanning Calorimetry

1.Principle of operation: Heat Flux 2.Temperature working: Room Temp. to 500°C 3.Furnace: Low mass Furnace made of Silver for rapid heating/cooling and resistant to corrosion 4.Temp. accuracy: ± 0.2°C/k or better 5.Temp. precision: ± 0.02°C/k or better 6. Furnace temperature resolution: ± 0.00006°C/k or better 7.Heating rate: 0.02 to 250°C/min or better 8.Cooling rate: 0.02 to 50°C/min or better 9.Sensor: Thermocouple based,Chemical resistant, Corrosion resistant, exchangeable type heat flow measurement offering low signal time constant 1 to 2 seconds or better. 10.Resolution: 0.04μW or better (should not digital resolution) 11.Purge gas: Inert, reactive & static 12.DSC Amplifier range: ± 160mW or better 13.Baseline Curvature/Flatness: < ±10 μW or better 14.Crucibles & press: 100nos. Aluminum with a Sealing press. Should have Inbuilt Gas switching facility. 15.Service & Application Support: Must have application Lab in India with qualified personnel to assist application related queries. 16.The system have provision for future up gradation with microscopy-DSC Measurements with Visual Observation: Simultaneous image analysis and DSC measurements – provide a complete thermal picture of the sample with Microscopy System. 17.Warranty: One Year 18.All above technical specifications must be available at Company Website or literature

Kea Enterprises

Novus Bioscience