Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹65,269.52Admitted-Finance | -30.56% | ₹65,269.52 | L1 | Admitted-Finance |
| 2 | L2₹76,905.99Admitted-Finance | -18.18% | ₹76,905.99 | L2 | Admitted-Finance |
| 3 | L3₹77,075.18Admitted-Finance | -18.00% | ₹77,075.18 | L3 | Admitted-Finance |
| 4 | L4₹77,197.37Admitted-Finance | -17.87% | ₹77,197.37 | L4 | Admitted-Finance |
Updated dates
Tender Value
₹94,000
EMD Value
₹1,880
Closing Date
16 Mar 2026, 6:00 pmClosed
Executive Engineer PWD(RandB) Div Khour
Executive Engineer PWD(RandB) Div Khour
Repair at Govt. Higher Secondary School Pallanwala. Under PM Shri PAB 2025-26)
2026_PWDJK_304770_3
Short e-NIT No. 62 of 2025-2026/Khour Dated 27-02-2026
Open Tender
Civil Works
30 days
KHOUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD(RandB) Div Khour
₹1,880
Executive Engineer PWD(RandB) Div Khour
9 Apr 2026
27 Feb 2026
18 Mar 2026
28 Feb 2026
16 Mar 2026
28 Feb 2026
10 Mar 2026
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.With 12 mm mild steel U beading
Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :75x63x4 mm
Providing and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. Complete Anodized (AC 15) aluminum
Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than groade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100mm
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm
stage.html
html • 0.03 MB
techsummary_990052.pdf
BOQ Comparative Chart
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
BOQ_990052.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid