Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC 225 NAROT COLONY MODEL TOWN PATHANKOT PB 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹20.5 L+₹60,364.40 (3.03%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹20.5 L+₹64,937.96 (3.26%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹21.1 L+₹1.2 L (5.97%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹22.4 L+₹2.5 L (12.5%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N)Mamun
Garrison Engineer(N)Mamun Pin-145001
PROVN OF SECURITY LIGHTS, POLES, GEYSERS ETC UNDER AGE E/M-I OF GE(N) MAMUN
2023_MES_612426_2
GE(N)/M-32/2023-24
Open Tender
Civil Works
Item Rate
120 days
Garrison Engineer(N)Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N)Mamun
₹54,000
19 Oct 2023
29 Aug 2023
20 Sept 2023
29 Aug 2023
18 Sept 2023
5 Sept 2023
Amount
M&L for erection of steel tubular swaged pole 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, duly applied a coat of red oxide primer (internally and externally). The pole shall be painted (above coping) with 05 numbers circular strips each of 30 cm (of colour combination as directed) with synthetic enamel paint duly marked pole number in approved pattern. The remaining pole shall be painted with two coats of aluminium paint complete all as spfd and directed. Note: Earth work i.e excavation, removal and PCC work shall be measured and paid separetly.
S&F high power LED street light light 60 W, 230 volts with surge protection not less than 4 KV inbuilt driver & minimum 10 KV separate in the light housing, powder coated pressure die cast aluminimum housing, IP 65 protection with heat resistent toughened glass, suitable size service bracket fixed with clamps, nut, bolt washers etc and making electric connections complete all as specified and directed. Notes:- (a) Driver shall be potted antivibration type. (b) 10 KV separate Surge Protection shall be provided as a part of fitting. (c) Name of manufacturer should be embessed on fitting.
All as per item No 2 but LED street light 45 Watt
S&F 120 Watt, lP66 LED flood light luminaries comprising of Die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 120 Lum/ watt, color temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95, IP-66 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges. The luminaire must have secondary optics with perfectly matched lens for better light control, making electrical connections complete all as specified and as directed.
S&F junction box water proof outdoor type made out of SMC of external dimensions 300 x 200 x 105 mm single door type hinged with locking arrangement front operated with one MCB 06 Amps, capacity for housing 3 phase and neutral busbar, connecting incoming/outgoing cables including necessary cable glands and fixed to the existing poles with mild steel clamp made of MS flat iron 25x4 mm (as per sample) with nut , bolts complete all as specified and directed.
S&F in replacement of GI tubing, light grade 40 mm bore with fittings laid for protection of cable under road crossing/ fixed to walls or pole complete all as specified and as directed. Note : Clamps for fixing pipe, nuts, bolts washers etc if required is deemed to be included in quoted rates.
All as per item 6 but 50 mm bore.
M&L for 1.5 sqmm 3 core PVC insulated PVC sheathed multicore flexible copper conductor cable, 1100 Volts grade confirming to IS-694/2010 of size including drawn into the pole from junction box to light fitting after necessary drilling in the pole complete all as specified and as directed.
Supply, laying, connecting and testing XLPE insulated armoured heavy duty electric cable with PVC insulated aluminium multistranded conductor 1100 Volt grade cross sectional area 16 Sqmm 4 core with aluminium termination lugs, laid in trench/cable duct/through wall/pole, making good disturbed surface/ flooring/tilling to match with existing specification complete all as specified and directed.
All as per item 9 but cable of size 50 Sqmm 3.5 core.
All as per item 9 but cable of size 25 Sqmm 3.5 core.
All as per item 9 but cable of size 10 Sqmm 4 core.
Excavating in trenches in soft / loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, and getting out complete all as specified and directed.
All as per item No 13 but depth exc 1.5 m and n exceeding 3m .
Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregrate as in foundation, filling as mass concrete for pole including necessary form work complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregrate for coping of poles ncluding necessary form work complete all as specified and directed.
Supply and laying bricks sub class 'B', laid dry in trenches over the cable adjoining each other widthwise for cable protection complete all as specified and as directed.
M&L for sand cushioning to under groudnd cables in layers of sand of 23cm thick (8cm before laying the cable and 15cm thick after laying cable) in trenches complete as specified and directed. Note: Only punned thickness of 18cm shall be measured and paid.
S&F automatic timer switch for ON/OFF street lights based on lux level of natural light with current rating 40A, 3 pole, 415Volts, 4 wire, 50Hz max. sensor based timer should also having over voltage and low voltage trip with auto reset facility complete with MCB TPN 40A -01 No, contactor 415 volt TP of rating 40A-01 No, Digital timer 24Hr- 01 No, Toggle switch- 01No , etc suitable up to 5KW load fixed in suitable size of SMC/polycarbonat box IP-65 etc complete with all electric connection with locking arrangement complete all as specified and directed. Make Hansel/Healer/HPL
M&L for ACSR of LT OH line, secured with insulators using aluminium binding wire, jointing jumpers, all disconnected cables with proper binding etc complete all as specified and directed.
M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed ,welding and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
M&L in replacmement shackle type insulator,100 mm height,115 mm dia, 31x5 mm strap,14 mm dia bolts Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, as under: complete all as specified and directed.
M&L for cable end jointing kit outdoor type heat shrinkable 1100 volts grade complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 16 Sqmm to 50 Sqmm size complete all as specified and directed.
Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW , 5 Star rated of ABS body vertical type , thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode , NRV , thermostate , indicators and temperature adjustible knob including steel braided flexible connection for pipe of size 15 mm dia bore with G.I hexagonal adopters / Nuts on both sides for inlet ( cold water supply ) & outlet ( hot water supply ) and including provision of wall mounting arrangment and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified . Make: Havells/Bajaj/Recold
S&F for Angle valve heavy duty cast copper alloy polished bright chromium plated Fancy type ( ISI Marked ) confirming to IS - 781 screwed down high pressure with crutch handle screwed both ends for iron pipe of size 15mm bore dia including wall flange complete all as specified and directed. Make:JAINKO/CERA/SHAKTI/PRAYAG
S&F for Bib tap for 15 mm bore dia pipe , heavy duty polished bright, cast copper alloy fancy type chromium plated ( ISI Marked ) confirming to IS - 781 with crutch handle screwed down for iron pipe with brass ferrule including wall flange complete all as specified and directed. Make:JAINKO/CERA/SHAKTI/PRAYAG
Ashoka Engineers
M/s. Aggarwal Engineers
M/S BHATIA CONSTRUCTION
KULBHUSHAN AGGARWAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .