Temporary laying of cables and erection of L.T. overhead line for providing power supply arrangement with Exterior illumination for celebration of safety fortnight programme held at Lingaraj Township of Lingaraj Area

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.(Above 8.0 metre and upto 10.0 metre)

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 mm dia and above including binding etc.

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.l. wire, cross arms, insulators etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm cross arm for 4 wire OH line complete with clamps, bolts, nuts and washers etc including drilling of holes for insulator pin sets and painting with primer and finished paint as required.

Erection of angle iron / channel iron cross arm on wood/RCC/PCC/Steel tubular/ Rail pole etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing massonry open duct as required ( Above 95 Sq mm and upto 185 sq. mm )

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm x 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. ( 63 A TP&N )

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. ( 100 A TP&N )

Supply of 63amp, 3pole 415V changeover switch.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

R K ENGINEERING (BID ID -1147316)

M/S. SRIDHAR SAHOO (BID ID -1148838)