Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC HOUSE NO 6 18 WARD NO 05 HOUSING BOARD COLONY HANUMANGARH JN 335512 RAJ | HANUMANGARH | RAJASTHAN | 335512 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.0 L+₹6.9 L (31.3%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
23 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
DAY TO DAY MAINTENANCE OF ARMAAN COMPLAINTS AT AH, JS AND MES COLONY AT MIL STN SRI GAGANAGAR
2023_MES_624188_1
GE SGNR/TOK-53 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and for un-enlisted, refer NIT para 8
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹60,000
Yes
17 Jan 2024
19 Oct 2023
25 Nov 2023
19 Oct 2023
23 Nov 2023
2 Nov 2023
Amount
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified and directed by Engineer-in-Charge.
Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening including easening and adjusting and then applying one coat of synthetic enamel paint to make the surface even and smooth complete all as specified and directed by Engineer-in-Charge.
S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engineer-in-Charge.
S&F factory made Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
S&F factory made pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and directed by Engineer-in-Charge.
S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.
S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated all as specified etc complete all as specified and directed by Engineer-in-Charge.
S&F factory made 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers including necessary beading used for protect the wire mesh also complete all as specified and directed by Engineer-in-Charge.
M&L for Plain fillets or beading of sectional area Exc 3 & n. exc 6 sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer-in-Charge.
S&F Solid FRP Door Frame of size 90mm x 45mm with single rebate of 32mm x 15mm to receive shutter moulded with fire retardent grade and saturated polyster resin and choped mat door framed shall be 2 mm thick and fill with suitable block in all the three legs the freme shall be covered with fiber glass rom all side MS stay shall be provided at the bottam to steady the frame . as per specification shown on drawings complete all as specified and directed by Engineer-in-Charge.
S&F for factory made solid panel FRP door shutter shall be 30mm thick (style) glass fibre reinforced plastic panel door shutter of requred colour with fire retardent grade and saturated polyster resin moulded to 3 mm thick FRP liminated for forming hollow rails and style with wodden frame and suitable block of seasoned wood inside at reqd places for fixing of fittings cast monolithically with 5 mm thick FRP panel and conforming to IS 14856:2000. suppling and fixing in the frame at site as per specification shown on drawings complete all as specified and directed by Engineer-in-Charge.
Dismantling of boarding any description fixed in any position with nails/ screws complete all as specified and directed by Engineer-in-Charge.
S& F 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work/steel frame work or ply wood as in cupboard shelf including 3 mm thick teak wood lapping on edge complete all as specified and directed by Engineer-in-Charge.
M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.
S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed by Engineer-in-Charge.
S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws.
S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed by Engineer-in-Charge..(D type Handle and back side staple)
S&F in repair aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed by Engineer-in-Charge.
S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-Charge.
S&Fin repair 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-Charge.
S&F 250 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed,complete all as specified and directed by Engineer-in-Charge.
S&F in repair 250 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engineer-in-Charge.
S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge.
S & F in repair hasp and staple, safety type of aluminium anodised100mm size fixed with screw complete all as specified and directed by Engineer-in-Charge.
Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed by Engineer-in-Charge.
S & F steel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded ( for glazed shutter) complete all as specified and directed by Engineer - in - Charge. Note: Only Glass will be measured and paid seperately.
S & F steel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded ( for gauzed shutter)complete all as specified and directed by Engineer - in - Charge. Note: Only wiremesh will be measured and paid seperately.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified and directed by Engineer-in-Charge.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.including taking down ms frame and refing ms frame with new wire mesh with tinned tack/by welding in steel window/ventilator /Door and making good the disturbed portion during execution complete all as specified and directed by Engineer-in-Charge.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
M & L sheet glass ordinary quality 4.0 mm thick and glazing with oil putty/ aluminium beadings in square n exc 0.50 Sqm in each panes fixed to steel, metal or aluminium windows including necessary aluminium beadings ,wooden window frames complete all as specified and directed by Engineer-in-Charge.
M & L in repairs sheet glass ordinary quality 4.0 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed by Engineer-in-Charge.
All as per item above but pin head type, figured glass complete all as specified and directed by Engineer-in-Charge.
M&L for Alumunium powder coated ventilator including frame and shutter and provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note : Glass panes and wiremesh shall be measured and paid seperately under respectively Items .
S&F Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified and directed by Engineer-in-Charge.
M&L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces including as knotting, stopping, Burning off or removing, scraping etc,and then applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. including 15 mm thick Screed bed or bedding layer in CM (1:4) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.Note : Using only course sand in screed bed..
S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. including 10 mm thick rendering in cement mortar 1:4 as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Note :- Rendering will be done in course sand (Toka sand) onlyetc complete all as specified and directed by Engineer-in-Charge.
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.
M&L for 18 to 20 mm thick Granite (of any type) slab of approved shade as in kitchen platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) over & including 25mm thick screed bed (bedding layer) in CM 1:4, complete all as specified and directed by Engineer-in-Charge.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge.
M&L for Water proofing treatment to RCC sunken slab and adjoining vertical surfaces (not exceeding 45 cm depth of sunken) as specified under :- (a) Cleaning the surface with wire brush/ coir brush, removing loose material like dust particles,dirt e.t.c (b) Rendering 15 mm thick in cement mortar (1:3) using coarse sand including mixing of liquid WPC in mortar @ 200 ml per bag of cement of 50 Kg trowel even and smooth with steel trowel on sunken surfaces .(Cost of WPC shall be included in the unit rate). (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls . (d) Applying first coat of two component modified polymer coating on the horizontal and vertical surface. (e) Provn of glass fibre mesh of 2x2 mm immediately on above coating. (f) Apply second coat of two component modified polymer coating after 72 hrs of above coating. (g) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (h) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. Note:- (i) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer as per manufacturer instructions. (ii) The plan area of floor shall be considered for payment.
Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed by Engineer-in-Charge.
M&L 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick over a truly rammed surface as in sub base ,floors and pavings, plinth protection complete all as specified and directed by Engineer-in-Charge.
M&L for PCC (1:4:8)Type D-2, (using 40mm graded agg) 75mm thick as in subbase floors, pavings, e.t.c complete all as specified and directed by Engineer-in-Charge.
M&L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement, ccomplete all as specified and directed by Engineer-in-Charge.
M&L for PCC (1:2:4) type B-1, 25mm thick as in floors,pavings e.t.c finished even and fair. complete all as specified and directed by Engineer-in-Charge.
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store. complete all as specified and directed by Engineer-in-Charge.
Refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge.
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.
Refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engineer-in-Charge.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks of any description exc 250 and n.exc 500 ltrs capacity and removal from site complete all as specified and directed by Engineer-in-Charge.
Disconnecting existing tanks of any description exc 250 and n.exc 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-in-Charge.
M&L for providing cement concrete 1:2:4 Type B1 using 20 mm graded aggregate for platforms of water tanks on roof, as in coping, benching kerb concrete etc including weathing slightly rounded or chamfered angles and throating including necessary formwork etc complete all as specified and directed by Engineer-in-Charge.
S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered conforming to IS water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.
S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer-in-Charge.
S&F in repair 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc. complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs long body 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.
S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed by Engineer-in-Charge.
S&F PTMT grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed by Engineer-in-Charge.
S&F PTMT grating 100mm dia without hole (Minimium weight 25 grams) complete all as specified and directed by Engineer-in-Charge.
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CPBrass waste fitting amd waste pipe overall size of SS sink 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engineer-in-Charge.
S&F in repair wash hand basin of size 550 mm x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer-in-Charge.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge.
S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete all as specified and directed by Engineer-in-Charge.
S&F in repair brass chromium plated jet spray fitting with chrome plated 1.5 mtr long extendable, flexible tube, fixed to EWC complete all as specified and directed by Engineer-in-Charge.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.
S & F in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engineer-in-Charge.
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm dia fancy type PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed by Engineer-in-Charge.. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engineer-in-Charge.
Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engineer-in-Charge.
S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified and directed by Engineer-in-Charge.
S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors.complete all as specified and directed by Engineer-in-Charge.
S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge.
S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed by Engineer-in-Charge.
M&L Branch pieces, 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.
M&L Branch pieces, 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.
M&L Bends suitable for 100mm dia CI pipe with duck's foot or heel rest as in repairs complete all as specified and directed by Engineer-in-Charge.
M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complete all as specified and directed by Engineer-in-Charge.
S&F in repairs CI cowls 100 mm complete all as specified and directed by Engineer-in-Charge.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15 mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement. complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed by Engineer-in-Charge.
M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) M&L wall care putty in two coats 1.5mm thick each layer on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b) M&L two coat of Interior Acryulic Emulsion over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible
M&L for applying two coat of white wash on newly plastered surface of ceiling etc complete all as specified and directed by Engineer-in-Charge.
M&L for wall care putty in two coats 1.5mm thick each layer on old internal wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as specified and directed complete and applying two coat of Interior Acryulic Emulsion of approved tint over a coat of primer on old prepared surface by using Airless spray / Roller over complete all as specified and directed by Engineer-in-Charge. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible
M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and smooth andcomplete and then appplying two coats of white wash on old decorated plastered or un-plastered surfaces of walls etc all as specified & directed by Engineer-in-Charge.
Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
M&L half brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
M&L for welding in repairs Thickness of metal to be welded will be Exc 9 mm but not exc 20mm complete all as specified and directed by Engineer - in - Charge.
Demolition of RCC of any description such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)
M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-Charge.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.
Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed by Engineer-in-Charge.
S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per ground and directed by Engr in charge complete all as specified and directed by Engineer-in-Charge..(Including taking down existing spindle carefully and fixed the same in position)
S&F 16 mm dia 3-layer PP-R poly propylene random copolymer concealed pipes SDR 7.4(PN-16)UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed complete to wall,ceilings or in floors.all as complete all as specified and directed by Engineer-in-Charge.
S&F outer dia of pipe 16 to 40mm making connection of PP-R distribution branches with PP-R of following sizes by providing and fixing tee,including cutting and making fusion joint etccomplete all as specified and directed by Engineer-in-Charge.
S&F outer dia of pipe 16 to 40mm making connection of PP-R distribution branches with PP-R of following sizes by providing and fixing elbow including cutting and making fusion joint etc complete all as specified and directed by Engineer-in-Charge.
S&F outer dia of pipe 16 to 40mm making connection of PP-R distribution branches with PP-R of following sizes by providing and fixing socket including cutting and making fusion joint etc complete all as specified and directed by Engineer-in-Charge.
S&F 25mm PP-R Gate valves(Brass insert) as per requirement of the site complete all as specified and directed by Engineer-in-Charge.
S&F in repairs EWC seat cover Plastic water closet seat closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 110 mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints jointed with solvent joint fixed to wall complete all as specified and directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing the same at same place including fittings and accessories if required except pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair, HDPE Lid cover for PVC water tank sutiable for 500 &1000 Ltr capacity complete all as specified and directed by Engineer - in - Charge.
S&F in repair stainless steel Toilet paper holder, box type complete all as specified and directed by Engineer-in-Charge.
S&F in repair waste coupling of stainless steel (half or full threaded) of 32 mm complete all as specified and directed by Engineer - in - Charge. (Minium weight 60 gms)
S&F in repair Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed by Engineer-in-Charge.
S & F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for pipe of 100mm dia bore and fixed etc complete all as specified and directed by Engineer-in-Charge.
M&L for repairing of leaking bib taps of any patterns, concealed stop cock, pillar cock or wall mixer , basin mixer with and including internal any accesaries like spindle, washer etc of any description & any dia (15mm / 20mm) bore and fixing properly, making serviseable specialy for MAP phage -II plumbing fittings etc complete all as specified and directed by Engineer-in-Charge.
S&F in repair, Brass CP mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC outlet plain waiste pipe suitable for 32mm bore waiste coupling or for Sink of any pattern complete all as specified and directed by Engineer-in-Charge.
S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm sheet thick fixed with rawl plug and CP steel screws complete all as specified and directed by Engineer-in-Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
PAREEK AND COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .