West Bengal Sdc

Active

Works

Miscellaneous Works

WBPHED/EE/AMD/ NIeT-33 of 2026-2027/5

Public Health Engineering Department

Churulia | Purba Bardhaman, West Bengal

Amount: ₹24.8 LCloses: 30 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes30 Oct 2026
Bid Opening2 Nov 2026

Tender Value

₹24.8 L

EMD Value

₹49,700

Closing Date

30 Oct 2026, 4:00 pm

Tender Inviting Organisation

Name

Executive Engineer,AMD P.H.E dte

Address

Office of the Executive Engineer,Asansol Mechanical Division,Public Health Engineering Directorate,PASCHIM BARDHAMAN,713305

Work Description

Providing and Installation of 90 KW/120 HP Centrifugal Pump-Motor set in position-02 for madantore Zone, repairing and overhauling of 315 KVA transformer, rectification of LT MCC panel at Ajoyghat Pumping Station at Churulia Water Supply Scheme.

Tender Information

Tender ID

2026_PHED_5080510_5

Reference Number

WBPHED/EE/AMD/ NIeT-33 of 2026-2027

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Item Wise

Period of Work

30 days

Location

Churulia

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

RequiredWBF 2911 (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹49,700

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

2 Nov 2026

Download Starts

14 Oct 2026

Download Ends

30 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (36 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Centrifugal Pump Replacement portion:-
1.01	Horizontal Split casing Centrifugal Pumping Machinery with Channel Base Frame, Couplings, Coupling Guards, Companion Flanges, foundation bolt etc. with Horizontal foot Mounted, TEFC, Induction Motor, duty with adequate margin as per direction of EIC. M.O.C. for Pump:- a) Volute Casing-C.I. IS:210 FG:260 b) Impeller-BR IS:318 GR-LTB-2 c) Shaft - SS ASTM A 276 CL 410, ANLD d) Shaft Sleeves-SS ASTM A 276 CL 410ANLD-250-280 BHN e) Neck ring- LTB5(IS:318, Gr LTB-5) f) Discharge-200 M³/Hour, Head-90 Mtr. (H-Q-P Curve of Pumps has to be submitted during the delivery) (Make:- Kirloskar/Mather & Platt /Other approved make) Specifications for Motor:- a) 90 KW(4 Pole, 3 Phase Induction Motor) b) Rotational Speed-1480 RPM c) Colling Type-TEFC d) Operating Voltage-415 V±10%, Frequency- 50 Hz ± 5%. e) Efficiency Class-IE-4 f) Protection Class-IP55 (Make:-CG/Marathon/Other approved make)	1	Set	2	₹2
1.02	200 mm X 125 mm eccentric reducer X 200 mm long, 8 mm thick as per IS:2062.	1	No	3	₹3
1.03	100 mm X 200 mm concentric enlarger X 200 mm long, 8 mm thick as per IS:2062.	1	No	4	₹4
1.04	200 mm cast iron, P.N.-1.0, double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm. All the valves should be tested by closed end method only.(Make:-IVI/Jupiter/Other approved make)	1	No	5	₹5
1.05	150 mm dia Glycerine filled Diaphragm Seal type pressure gagues(0-16 kgf/Cm²) with syphon tube and three way cock and as per technical specification as per IS:3624:1987.(Make:-H.Guru/Other approved make)	2	Set	6	₹12
1.06	150 mm dia Glycerine filled Diaphragm Seal type compound gagues(+1-1 KSCG) with syphon tube and three way cock and as per technical specification as per IS:3624:1987.(Make:-H.Guru/Other approved make)	2	Set	7	₹14
1.07	Installation of above supplied centrifugal Pump-motor set, reducer, enlarger, valves(Item No-1.01, 1.02, 1.03, 1.04, 1.05, 1.06) after withdrawing of existing damaged same from the base, removing the base frame, dismantling of foundations, making new foundation at the same place by using RCC, to avoid any vibrational damaged, inserted suitable sized of eye bolts, including supply of all erection items as required for instalation of pumping machinery, necessary inter-connection of motors with earth bus bar, power cable from LT MCC to motor etc as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC.including hire charges of welding set, fuel, lubricant etc for completion of work, as per fully satisfaction of EIC.	1	Item	8	₹8
2315 KVA Transformer repairing and overhauling portion :-
2.01	Disconnection of the 315 KVA transformer from H.T. & L.T. side with proper protection by engaging skilled Electrician.	1	Item	10	₹10

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.67 MB

Tendernotice_2.pdf

PDF • 0.53 MB

Work Item Documents

BOQ_5187417.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Centrifugal Pump Replacement portion:-
1.01	Horizontal Split casing Centrifugal Pumping Machinery with Channel Base Frame, Couplings, Coupling Guards, Companion Flanges, foundation bolt etc. with Horizontal foot Mounted, TEFC, Induction Motor, duty with adequate margin as per direction of EIC. M.O.C. for Pump:- a) Volute Casing-C.I. IS:210 FG:260 b) Impeller-BR IS:318 GR-LTB-2 c) Shaft - SS ASTM A 276 CL 410, ANLD d) Shaft Sleeves-SS ASTM A 276 CL 410ANLD-250-280 BHN e) Neck ring- LTB5(IS:318, Gr LTB-5) f) Discharge-200 M³/Hour, Head-90 Mtr. (H-Q-P Curve of Pumps has to be submitted during the delivery) (Make:- Kirloskar/Mather & Platt /Other approved make) Specifications for Motor:- a) 90 KW(4 Pole, 3 Phase Induction Motor) b) Rotational Speed-1480 RPM c) Colling Type-TEFC d) Operating Voltage-415 V±10%, Frequency- 50 Hz ± 5%. e) Efficiency Class-IE-4 f) Protection Class-IP55 (Make:-CG/Marathon/Other approved make)	1	Set	2	₹2
1.02	200 mm X 125 mm eccentric reducer X 200 mm long, 8 mm thick as per IS:2062.	1	No	3	₹3
1.03	100 mm X 200 mm concentric enlarger X 200 mm long, 8 mm thick as per IS:2062.	1	No	4	₹4
1.04	200 mm cast iron, P.N.-1.0, double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm. All the valves should be tested by closed end method only.(Make:-IVI/Jupiter/Other approved make)	1	No	5	₹5
1.05	150 mm dia Glycerine filled Diaphragm Seal type pressure gagues(0-16 kgf/Cm²) with syphon tube and three way cock and as per technical specification as per IS:3624:1987.(Make:-H.Guru/Other approved make)	2	Set	6	₹12
1.06	150 mm dia Glycerine filled Diaphragm Seal type compound gagues(+1-1 KSCG) with syphon tube and three way cock and as per technical specification as per IS:3624:1987.(Make:-H.Guru/Other approved make)	2	Set	7	₹14
1.07	Installation of above supplied centrifugal Pump-motor set, reducer, enlarger, valves(Item No-1.01, 1.02, 1.03, 1.04, 1.05, 1.06) after withdrawing of existing damaged same from the base, removing the base frame, dismantling of foundations, making new foundation at the same place by using RCC, to avoid any vibrational damaged, inserted suitable sized of eye bolts, including supply of all erection items as required for instalation of pumping machinery, necessary inter-connection of motors with earth bus bar, power cable from LT MCC to motor etc as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC.including hire charges of welding set, fuel, lubricant etc for completion of work, as per fully satisfaction of EIC.	1	Item	8	₹8
2315 KVA Transformer repairing and overhauling portion :-
2.01	Disconnection of the 315 KVA transformer from H.T. & L.T. side with proper protection by engaging skilled Electrician.	1	Item	10	₹10

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Centrifugal Pump Replacement portion:-

1.01

Horizontal Split casing Centrifugal Pumping Machinery with Channel Base Frame, Couplings, Coupling Guards, Companion Flanges, foundation bolt etc. with Horizontal foot Mounted, TEFC, Induction Motor, duty with adequate margin as per direction of EIC. M.O.C. for Pump:- a) Volute Casing-C.I. IS:210 FG:260 b) Impeller-BR IS:318 GR-LTB-2 c) Shaft - SS ASTM A 276 CL 410, ANLD d) Shaft Sleeves-SS ASTM A 276 CL 410ANLD-250-280 BHN e) Neck ring- LTB5(IS:318, Gr LTB-5) f) Discharge-200 M³/Hour, Head-90 Mtr. (H-Q-P Curve of Pumps has to be submitted during the delivery) (Make:- Kirloskar/Mather & Platt /Other approved make) Specifications for Motor:- a) 90 KW(4 Pole, 3 Phase Induction Motor) b) Rotational Speed-1480 RPM c) Colling Type-TEFC d) Operating Voltage-415 V±10%, Frequency- 50 Hz ± 5%. e) Efficiency Class-IE-4 f) Protection Class-IP55 (Make:-CG/Marathon/Other approved make)

Set

₹2

1.02

200 mm X 125 mm eccentric reducer X 200 mm long, 8 mm thick as per IS:2062.

₹3

1.03

100 mm X 200 mm concentric enlarger X 200 mm long, 8 mm thick as per IS:2062.

₹4

1.04

200 mm cast iron, P.N.-1.0, double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm. All the valves should be tested by closed end method only.(Make:-IVI/Jupiter/Other approved make)

₹5

1.05

150 mm dia Glycerine filled Diaphragm Seal type pressure gagues(0-16 kgf/Cm²) with syphon tube and three way cock and as per technical specification as per IS:3624:1987.(Make:-H.Guru/Other approved make)

Set

₹12

1.06

150 mm dia Glycerine filled Diaphragm Seal type compound gagues(+1-1 KSCG) with syphon tube and three way cock and as per technical specification as per IS:3624:1987.(Make:-H.Guru/Other approved make)

Set

₹14

1.07

Installation of above supplied centrifugal Pump-motor set, reducer, enlarger, valves(Item No-1.01, 1.02, 1.03, 1.04, 1.05, 1.06) after withdrawing of existing damaged same from the base, removing the base frame, dismantling of foundations, making new foundation at the same place by using RCC, to avoid any vibrational damaged, inserted suitable sized of eye bolts, including supply of all erection items as required for instalation of pumping machinery, necessary inter-connection of motors with earth bus bar, power cable from LT MCC to motor etc as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC.including hire charges of welding set, fuel, lubricant etc for completion of work, as per fully satisfaction of EIC.

Item

₹8

2315 KVA Transformer repairing and overhauling portion :-

2.01

Disconnection of the 315 KVA transformer from H.T. & L.T. side with proper protection by engaging skilled Electrician.

Item

₹10