Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC HIMACHAL PRADESH HP | UNA | HIMACHAL PRADESH | 177202 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹8.5 L+₹1.2 L (15.8%)Rejected-Finance | L2 | Rejected-Finance Rate quoted higher side | |
| 3 | L3₹10.1 L+₹2.8 L (38.1%)Rejected-Finance VILL LANGWAN PO LAMBLOO TESHIL DISTT HAMIRPUR 177029 | HAMIRPUR | HIMACHAL PRADESH | 177029 | L3 | Rejected-Finance Rate quoted higher side | |
| 4 | L4₹10.6 L+₹3.3 L (45.0%)Rejected-Finance D SHALA DISTT KANGRA HP | L4 | Rejected-Finance Rate quoted higher side |
Tender Value
Refer Docs
EMD Value
₹20,500
Closing Date
5 Jul 2021, 5:00 pmClosed
EE Jal shakti Division Salooni
JS Division salooni
Sh Co RCC seditank 20000 ltrs cap 1 nos CO RCC Filter Bed 50 sqm 1 no
2021_HPIPH_48963_1
2218-67 dt22-06-2021
Open Tender
Civil Works
Item Rate
180 days
EE JS Diviison Salooni
Please refer Tender documents.
8 documents required · 8 mandatory
₹400
Yes
₹20,500
Yes
10 Sept 2021
23 Jun 2021
6 Jul 2021
24 Jun 2021
5 Jul 2021
24 Jun 2021
Amount
Excavation in foundation trenches etc. in earth work in all kind of soil such as pick work,jumper work, blasting work in hard & soft rock and chiesaling work including slushy soil & under flooring water up to all excavated soil up to any lead & lifts from the edge of excavation and then depth and stacking the returning the stacked soil in 15 CM ( fifteen centimetres) layer's when required in to plinth sides of foundation etc. Consolidation each diposited layer by ramming & watering & then disposing of all surplus excavated earth as directed with in all lead of 20 meters in Chiselling /wedging out of rock complete in all respect in trench weir, sump well, anchor blocks, presedimentation tank steel bridge, check dam, site development works etc.within all leads and lifts as per the direction of Engineer-in-Charges.
Providing and laying cement concrete 1:3:6 ( One cement : three sand: six graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charges.
Providing and laying cement concrete 1 : 1. 5 : 3 ( One cement : one & half sand: three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-
Foundation ,footing bases of column and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charges.
In walls ( any thickness but not less than 0.10 metre thickness) attached pillasters, buttresses plinth and string cources etc. from top of foundationlevel up to floor two level within all leads and lifts as per the direction of Engineer-in-Charges.
Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre so as to give fair finish including centering, shuttering and propping etc. with wooden battens and ballies, height of propping and centring below floor to ceiling not exceeding four metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:-
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.
Providing mild / tor steel reinforcement for reinforced concrete work including bending, binding and placing in position complete up to floor two level including within all leads and lifts as per direction of Engineer -in- Charge.
Providing,laying and jointing testing in trenches galvanised mild steel tubes or of approved make by JSV (HP) (list attached) screwed and socketed. ISI marked conforming to IS: 1239( latest with upto date ammendments) including tube fittings such as bends, tees, air valves, unions and collars etc as per direction and to the entire satisfaction of the engineer in charge (earth work in trenches to be measured and paid for separately).
40 mm dia nominal bore (LG)
Providing & Fixing of brass Wheel valve with hand wheel as per IS 780 Class upto 300mm dia (including brass spindle and as per IS 2906 class-II for idametre more than 300mm complete with bolts, nuts, rubber issertion etc.within all leads & lifts.
40 mm dia nominal bore
Providing & placing in horizontal layers Filtering media duly graded screened washed and cleaned as specified by the Engineer-in-charge.
Top Layer: Fine sand screened, cleaned, washed and graded effective size 0.2 to 0.4mm with uniformity cofficient 2.0 to 3.0 from approved source.
Second Layer : Coursed sand screened, cleaned, washed and graded effective size 3mm to 6mm from approved source.
Third Layer:- Bajri screened, cleaned, washed and graded effective size 6mm to 20mm from approved source.
Forth Layer:- Bajri (Coursed) screened, cleaned, washed and graded effective size 20mm to 25mm from approved source.
Bottem Layer:- Broken stone screened, cleaned, washed and graded effective size 50mm to 75mm from approved source.
Bricks in layer under bottom layer of filter media.
Providing and fixing stair case (4.0 metre long & 0.35 metre wide) of angle iron fam 4.0 metre long of size 65x65x6mm embedded in cement concrete within all leads and lifts as per the direcrtion of Engineer-in-charge.
Kehar Singh
Madan Lal
Kuldeep Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .