Supply, Erection, Testing and Commissioning of Pumping machinery and allied works at Pise Raw water pumping station for additional water supply

Amount

Supplying, erecting, testing & commissioning SF 6 Insulated 22 kV, 630 A, 16 kA / 3 sec, 4 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 3 nos. feeder with load break switch and 1 no. feeder with VCB as per specification no. SW-HTS / RMU SCADA (3 LBS + 1 VCB)

Supplying, erecting, testing & commissioning SF 6 Insulated 22 kV, 630 A, 16 kA / 3 sec., 3 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 2 nos. feeder with load break switch and 1 no. feeder with VCB as per specification no. SW-HTS / RMU SCADA. (2 LBS + 1 VCB).

Supplying, erecting & terminating 3 X 300 sqmm 22 KV, XLPE (E) round armoured cable on wall / ceiling or laid in provided trench / pipe in an approved manner as per detailed MSEDCL specification.

Providing and erecting heat shrinkable outdoor termination kit for 22 KV (E) XLPE round armoured HT cable 3 X 300 sqmm with necessary material as per specification no. CB-JT / HT.

Providing and erecting heat shrinkable straight through joint kit for 22 kV (E) XLPE HT cable 3 core 300 sq.mm. with necessary material as per specification no. CBJT/HT. Joint for cable from tower line.

Supplying & laying (including excavation) 25 cm dia. RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying & laying (including excavation) 25 cm dia. half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying & erecting cast iron cable indicator plate buried along with route of cable for XLPE armoured cable as per specification no. CB-CIP.

Supplying, erecting, testing, commissioning 22 KV HT metering cubical (compact type) approved by MSEDCL / licensee fabricated with 2 mm. (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25 X 6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no. of times the opening of doors, top side cover (C.T., P.T. cover) interlock with meter doors, epoxy coated 3 nos. CT having required ratio between 50/5 A to 100/5 A, VA10, class 0.2S, 22000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by licensee with necessary test certificates and erected on provided plinth / CC foundation.

Supplying, erecting, testing & commissioning 22 / 3.3 kV, 5 MVA capacity low loss having vector group DYN11, copper wound, oil cooled, outdoor type power transformer with OLTC with remote operation panel, ONAN cooling system, protection relays, conservator with tapping between +/-10% on HV tapping in 16 steps of 1.25% for full load temperature rise not exceeding 45°C by oil & 50°C by resistance of winding over 50°C ambient after continuous run at full load rating designed to work on common busbar with standard mounting complete with RTCC panel as per latest IS codes with all amendments. Transformer losses at 50 % of full load and 100 % of full load shall be as per table no. 8.2 from energy conservation building code 2007 (User Guide).

Providing printed instruction chart for treating persons suffering from electric shock, printed in English and Marathi and duly laminated.

Provided pair of duly tested rubber hand gloves as per IS : 4770 suitable for working on 22 kV supply.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal use, scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 - 2006 & CPRI tested having 3 mm thickness of 22 KV. For RMU, Metering kiosk, HT panel.

Supplying shock proof leather safety shoes of electrical grade of standard size as IS: 11226, 14544 duly tested, with necessary test certificate from manufacturer.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conforming to IS : 2878 complete erected with necessary clamp made from 50 mm X 6 mm. M.S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS: 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Providing round bottom FIRE Bucket of 9 litter capacity as per IS: 2546 made out for 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE mark, on provided stand / wall hook.

Providing floor mounting stand for keeping 4 Nos. of FIRE Buckets 1500 mm in length, 900 mm in height frame made out of 30 X 30 X 4 mm. angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of res lead and two coats of silver paint.

Supplying and erecting copper earth plate size 30 mm X 30 mm X 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP. For transformer neutral = 2 / transformer i.e. 4 nos. For metering kiosk = 11

Supplying and erecting copper strip of required sizes used for earthing on wall and / or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. (EA-EP). For transformer neutral = 50 X 6 mm, For metering kiosk = 25 X 3 mm

Supplying and erecting galvanised cast iron earth plate size 60 mm X 60 mm X 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover complete with all materials, testing & recording the results as per specification no. EA-EP For transformer body = 2 / transformer i.e. 4 nos. For RMU, HT panel, RTCC panel, HT panel, APFC panel, starters, motors etc.

Supplying and erecting G.I. strip of required sizes used for earthing on wall and / or any other purpose with necessary G.I. clamps fixed on wall painted with bituminous paint in an approved manner with joint required. As per specification no. (EA-EP) For Any Purpose.

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 X 50 X 6 mm angle iron as corner support 2 m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 X 15 X 40 cm complete duly painted with one coat of red oxide and two coats alluminium paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width X 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no. SS-AS/DLD.

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete in transformer substation.

Supplying, erecting approved make thyrite type Lightening Arrestor suitable for H.T. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. Suitable for 22 kV Supply, Distribution class.

Supplying and erecting aluminium conductor, XLPE - 3.3 kV, armoured cable complete erected in provided trench or on provided trays in an approved manner as per direction of Engineer In Charge. 3 core 300 sqmm.

Supplying and erecting Aluminium conductor, XLPE - 3.3 kV, armoured cable complete erected in provided trench or on provided trays in an approved manner as per direction of Engineer In Charge. 3 core 150 sqmm.

Supplying and erecting Aluminium conductor, XLPE - 3.3 kV, armoured cable complete erected in provided trench or on provided trays in an approved manner as per direction of Engineer In Charge. 3 core 95 sqmm.

Supplying and erecting aluminium conductor, XLPE - 3.3 kV, armoured cable complete erected in provided trench or on provided trays in an approved manner as per direction of Engineer In Charge. 3 core 50 sqmm.

Supplying and erecting, XLPE insulated, armoured cable 1100 V grade with ISI mark four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. 4 core 10 sqmm From LT panel to distribution board of EOT crane.

Supplying and erecting 4 core 1.5 sqmm armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner including glands and copper lugs.

Supplying and erecting 7 core 1.5 sqmm armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner including glands and copper lugs.

Supplying and erecting 10 core 1.5 sqmm armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner including glands and copper lugs.

Supplying and erecting 4 core 2.5 sqmm armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner including glands and copper lugs.

Supplying and erecting 7 core 2.5 sqmmarmoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner including glands and copper lugs.

Supplying and erecting 10 core 2.5 sqmm armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner including glands and copper lugs.

Providing and erecting 3 core 300 sqmm IN-DOOR type termination kit, for 3.3 kV XLPE screened 3 core cable

Providing and erecting 3 core 150 sqmm IN-DOOR type termination kit, for 3.3 kV XLPE screened 3 core cable .

Providing and erecting 3 core 95 sqmm IN-DOOR type termination kit, for 3.3 kV XLPE screened 3 core cable .

Providing and erecting 3 core 50 sqmm IN-DOOR type termination kit, for 3.3 kV XLPE screened 3 core cable .

Supplying & erecting Siemens type brass cable glands for 4 core 10 sq. mm. for XLPE armoured cable as per specification No. CB-GL.

Supplying & erecting crimping type aluminium lugs for cable up to 16 sq. mm. complete as per specification no. CB-CL/AL.

No load compensation of transformer - Supplying and erecting bank of All Polypropylene capacitors with the standard capacities of 75, 84, 116, 133 and 167 KVAR units of power factor correction for operation on 3 phase, 50 Hz, 3300 V+/- 6 % with externally discharging resistances, earthing terminals and built on angle iron on channel iron frame work and provided with terminal cover box, H.T. bushing bus bar and HRC fuses etc. complete erected and tested. - Fixed type capacitors across transformers.

Providing & erecting hot deeped galvanised ladder type cable tray manufactured from 16 swg (1.6 mm thick) G.I. sheet of 300 mm width & 100 mm height comprising all required standard accessories. For power cables.

Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 swg (1.6 mm thick) G.I. sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. For control cables.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class “A” insulation conforming to IS : 15652 - 2006 & CPRI tested having 2 mm thickness for 3.3KV. For HT panel, APFC panel, Starters etc.

Supplying and erecting D.C.P. type Fire Extinguisher 9 Kg. capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50 X 6 mm M.S. flat with nuts and bolts grouted in wall complete.

Providing, installing, commissioning & testing of Vertical Turbine self water lubricated pump capable of discharge at rate of 4,200 CuM/Hr. at the duty point head of 52 Mtr. & operating head range of 40 Mtr to 63 Mtr. including Mild Steel column pipe manufactured from ERW pipes provided with anti-corrosive & special treatment paint, discharge head as per manufacturers standard, M.S. base plate connecting stool & strainer etc. complete all line shaft & impeller shaft of stainless steel ASTM A 276 - SS 410, Impeller of SS CF8M including all consumable materials. Complete pump assembly from discharge head to strainer shall have to be connected with M.S. (SS 304 for under water parts) nut & bolts tight complete as per detailed specifications. Pump operating speed shall be 980 RPM or as per manufacturers standard etc. with Vertical Solid Shaft Squirrel cage CACA induction motor of capacity 850 KW / 1140 HP (minimum) with F - Class insulation & operating on 3 ph, 50 Hz +/- 5 %, 3.3 KV AC +/-10 %, 980 RPM or as per manufacturer's standard suitable for above mentioned pump, suitable for 50 degree ambient with 6 Nos. winding RTD, 2 Nos. bearing RTD for each motor complete with suitable size terminal box for 3.3 KV XLPE armoured cable. Motor shall be suitable to drive the above mentioned pump set etc. complete. Cost includes - Pump, motor, M.S. base plate, coupling, M.S. coupling guard & S.S. foundation bolts, column pipe from pump to bottom of sump - approximately 14 m, set of special tools and tackles and all other accessories as per standard practice of TMC. Cost also includes testing at factory by job motor.

Providing, erecting and commissioning single girder electrically operated rectangular overhead travelling crane with 12 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block. 12 m span 15 tonne capacity EOT in pumphouse.

Providing, erecting and fixing square bar of EN 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and "J" bolts. Size = 50 X 50 mm (EN 8).

Providing DSL (Down Shop Lead) system for the above crane.

Providing and fixing in position and jointing high performance C.I. air valves for water combination type (Kinetic air valve along with automatic air valves) double ball, double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release and anti vacuum application designed for 16 Kg. per sq. cm. working pressure and tested for 20 Kg per sq. cm. pressure. (Rate including cost of gaskets, bolt, nut and any other material required for jointing and its transportation etc. excluding GST levied by GOI & GOM in all respect. C. I. ARV FLFF PN 1.6 - 200 mm dia. At a junction of delivery & manifold for raw water, inlet pipes of CLF.

Providing PN - 1 (Without by pass) - 200 mm dia. double flange sluice valve confirming for IS - 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Providing and supplying ISI mark C.I. D/F reflux valves (non-return valves) of following dia. including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. reflux valves as per I.S. 5312 Part I (1984). - With bypass arrangement - PN - 1.6 - 1200 mm. dia. - For delivery pipe of pumps.

Lowering, laying and jointing in position 200 mm dia. – Sluice valve for isolation valve of air valve D/F reflux valves, sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Lowering, laying and jointing in position 1200 mm dia. - NRV on delivery pipes of pump D/F reflux valves, sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Providing, double flanged short body pattern type manually operated butterfly valve having body, disc and end cover in graded cast iron to IS - 210 Gr.CF 200 generally confirming to IS – 13095 - 1991, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation / structural steel support. - 1500 mm dia. (PN 1.60 rating) - On raw water rising main.

Lowering, laying and jointing in position following C.I. butterfly valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. - 1500 mm dia. butterfly valve.

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia. including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S. 5312 Part I (1984) - with bypass arrangement - PN 1.60 – 1500 mm dia. - On raw water rising main

Lowering, laying and jointing in position following C.I. D/F Reflux valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. - 1500 mm dia. non return valve.

Providing, erecting electric valve actuators totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC / DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz, AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP - 67 protection class suitable for DOL starting and with three thermostat and 30 % over load margin. The torque rating of reduction gear box shall be atleast 1.5 times max. torque required for opening and closing of valve with integral starter for ON & OFF operation. -

Actuators for 1200 mm dia. sluice valves on pump delivery lines

Actuators for 1200 mm dia. butterfly valves on inlet of CLF

Providing, erecting, testing and commissioning of actuator panel including LED type indication lamps, start and stop push buttons, control MCBs / MCCBs, incomer MCCB, operating switches and all allied accessories complete to operate 5 nos. of actuators installed for 1200 mm dia. sluice valves.

Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. 4 core 4 sqmm for actuators.

Supplying & erecting Siemens type brass cable glands for 4 core 4 sq. mm. XLPE armoured cable as per specification no. CB-GL.

Supplying & erecting crimping type aluminium lugs for cable of 4 sq. mm. complete as per specification no. CB-CL/AL

Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with B.C. soil (in gunny bags if required). Providing impervious / semi pervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge, till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.

Dismantling of existing machinery Existing transformers

Dismantling of existing machinery 22 KV & 3.3 KV panels

Dismantling of existing machinery existing motors each of rating 450 KW / (603 HP)

Dismantling of existing machinery existing VT pumps each of rating 450 KW / (603 HP)

Dismantling of existing machinery EOT crane in pumphouse

Dismantling of existing machinery Cables of all sizes.

Dismantling of existing machinery Underground cables of all sizes.

Excavation for foundation / pipe trenches in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. and lift as below, stacking and spreading as directed, normal dewatering, preparing the bed for the foundation and excluding back filling, etc. complete.

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means

Dismantling dead pipeline of 700 mm dia. MS pipe M.S./R.C.C./ C.I./ P.S.C. and G.I./ A. C. / P. V. C. / S. W. / H. D. P. E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineering- charge with all leads and lifts including cleaning the surface, etc. complete.

Dismantling dead pipeline of 1000 mm dia. MS/ PSC pipe - M.S./R.C.C./ C.I./ P.S.C. and G.I./ A. C. / P. V. C. / S. W. / H. D. P. E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineering- charge with all leads and lifts including cleaning the surface, etc. complete.

Dismantling dead pipeline of 1250 mm dia. MS pipe - M.S./R.C.C./ C.I./ P.S.C. and G.I./ A. C. / P. V. C. / S. W. / H. D. P. E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineering- charge with all leads and lifts including cleaning the surface, etc. complete.

Dismantling dead pipeline of 1300 mm dia. MS pipe -M.S./R.C.C./ C.I./ P.S.C. and G.I./ A. C. / P. V. C. / S. W. / H. D. P. E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineering- charge with all leads and lifts including cleaning the surface, etc. complete.

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 200.00 mm (I. D.) - 6.00 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 1200.00 mm (I. D.) - 10.00 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 1250.00 mm (I. D.) - 10 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 1250.00 mm (I. D.) - 12.00 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 1500.00 mm (I. D.) -12.00 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 1600.00 mm (I. D.) - 12.00 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Dia. of Pipe : 2000.00 mm (I. D.) - 14.00 mm thick plate M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Transporting within 500 meters, laying in position to correct line and level M. S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified 5 mm to 8 mm thick Upto 250 mm. dia. - 200 mm dia. pipe

Transporting within 500 meters, laying in position to correct line and level M. S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified Above 8 mm upto 12 mm thick Above 1250 mm. Upto 1500 mm. dia.

Transporting within 500 meters, laying in position to correct line and level M. S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified Above 12 mm upto 16 mm thick From 2000 mm to 2250 mm. dia.

Lowering, laying in position to correct line and level including 5 mm to 8 mm thick Upto 250 mm. dia. M. S. specials with / without any out coating such as distance pieces, straps, bends, tapers, etc. on pedestals or chairs upon formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M etc. complete.

Lowering, laying in position to correct line and level including Above 8 mm upto 12 mm thick Above 1000 mm. Upto1250 mm. dia. M. S. specials with / without any out coating such as distance pieces, straps, bends, tapers, etc. on pedestals or chairs upon formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M etc. complete.

Transporting of Above 1000 mm. Upto1250 mm. dia. within 500 meters, laying in position to correct line and level M. S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified

Transporting of Above 1250 mm. Upto 1500 mm. dia. within 500 meters, laying in position to correct line and level M. S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified

Transporting of Above 1500 mm. Upto 1750 mm. dia. within 500 meters, laying in position to correct line and level M. S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified

Welding for Butt Joints : Plate thickness = 10 mm thick all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.

Welding Butt Joints : Plate thickness = 12 mm thick all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.

Welding Butt Joints : Plate thickness = 14 mm thick all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.

Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. Above 5 mm. Upto 10 mm.

Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. Above 10 mm. Upto 14 mm.

Providing and applying one coat of Gamma coating or equivalent such as Dr. Bake, Krishna conchem ,Asian Paint, Atul Limited, Burger Paint, epoxy primer 50 to 60 microns thick and covering two Coats of Gamma Coatings or equivalent such as Dr. Bake, Krishna Conchem, Asian Paint, Atul Limited, Burger Paints 30 microns thick each to new M.S. pipes and structural steel or concrete surface including repainting the surface by finishing by Solvent degreasing and de-rusting by applying chemical method and scaffolding is necessary required etc. complete as per manufacturers specifications.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores and stacking, etc. complete Only flanges with machining and drilling holes, etc. complete 40 mm thick or required thickness as directed by TMC.

Vacuum Breaker cum Air Release Valve :- Providing, Erecting and Commissioning MS Fabricated Vacuum Breaker Cum Air Release Valve. Valve should be with separate two number inlet port (VACUUM BREAKING) and one number outlet port (AIR RELEASE) with tamperproof construction. Total area of two Inlet Port equal to 100 % area of nominal size of valve. One number outlet port area should be100 % of the nominal size of valve (Orifice size equal to nominal size of the valve). Each vacuum breaking port should have independent isolation mechanism. All sliding parts and sealing discs should be made up of SS. Outlet port should be float operated by SS ball. All valve parts should be provided with suitable corrosion protection coat like hot dip galvanizing and epoxy coating during manufacturing. Body Test Pressure 16kg/cm2 (PN 1) - size 200 NB

Providing, Erecting and Commissioning of PN 1.60 - 1500 mm dia. M.S. Fabricated Multi Function Smart Valve. Valve should have different closing rate in multiple bands. Hydraulic Control Unit should be multi cylindrical control mounted outside the body of the valve. Valve should have multiple ports on either side of disc to curb low pressure wave. Valve should have following function 1) isolation, 2) non return function, 3)surge control by regulating momentum fluctuation, 4) flow stabilization by energy absorption of returning water column, 5) low pressure wave curbing at disc.

Providing, Erecting With by pass arrangement - PN -1.6 - 1200 mm diameter and Commissioning MS Fabricated Hydraulically controlled Non Return Valve. Valve should have single disc construction with different closing rate in multiple bands with the help of Hydraulic control. Hydraulic Control Unit should be multi cylindrical control mounted outside the body of the valve. DI/ MS specials required for installation of valves to be charged extra as per DSR/RC rates

Providing and erecting (PN 1) - size 200 NB Wafer type DI Butterfly Valve with MS double flanged strainer Supply & erection of Wafer type DI Butterfly Valve with MS double flanged strainer assembly with S.S. Strainer. Wafer type Butterfly valve should be as per IS 13095 with Body & disc as per SG 400/12, Seat - Nitrile / EPDM. Operation by Hand lever upto 150 mm & with Gear box for higher sizes. Body Test Pressure 16kg/cm2

Providing double flange type 50 mm dia. sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Providing double flange type 100 mm dia. sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Providing double flange type 1200 mm dia. sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in Teflon bearing including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. excluding C.C. foundation /structural steel support.

Lowering, laying and jointing in position 50mm dia. C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Lowering, laying and jointing in position 100mm dia. C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Lowering, laying and jointing in position 200mm dia. C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Lowering, laying and jointing in position 1200mm dia. C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

Providing, erecting and commissioning 1200 mm dia. M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia.

Providing, erecting and commissioning 1500 mm dia. M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia.

Providing and laying in situ Cement concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft , grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood formwork, bully / steel prop ups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad Rajashree etc. cement is permitted) (excluding M.S. or Tor reinforcement) In PCC M200

Providing and laying in situ Cement concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft , grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, 'plywood formwork, bully / steel prop ups, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad Rajashree etc cement is permitted) (excluding M.S. or Tor reinforcement) In RCC M300

Providing and casting in situ Cement Concrete of trap / gran-ite / quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centring, 'plywood formwork, bully / steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade - all types of columns

Providing and casting in situ Cement Concrete of trap / granite / quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centring, 'plywood formwork, bully / steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade - Beams / Braces / Lintels

Providing and casting in situ Cement Concrete of trap / gran-ite / quartzite / gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centring, 'plywood formwork, bully / steel prop-ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) (excluding M.S, or Tor reinforcement) For RCC M-300 grade - Slabs / Landings / Vertical walls / waist slabs / steps for staircase

Providing and laying in situ, following grades of C.C. of trap /granite/quartzite/gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete M-150 grade

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars ,binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) IS 1786, (Bd-F-17/306)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Disposal of excavated stuff as directed by Engineer In charge 5 km radius from work site all loading, unloading, and stacking, dumping etc. complete.

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete

Hydraulic testing of Above 1200 mm. upto 1500 mm. dia. (I.D.) M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary

Hydraulic testing of Above 1800 mm. upto 2250 mm. dia. (I.D.) M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary

Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5M c/c, distance and additional posts at every corner bends to curved shape with 3 rows of 25 mm dia. G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.

Crane hire charges for dismantling Butterfly valve

Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia. G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987 Mounting - direct bottom, stainless steel body, toughened glass window Pressure gauge 150 mm dia. for each pump delivery pipe

Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm to - 1000 mm including sensor, transmitter surge arrestor, cable suitable size for 25 mtrs built in GSM (with Simcard and its charges, valid for 36 months) including the pipe cutting, levelling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site. 1200 mm dia.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.

Providing and applying with mechanical arrangement 1:3 proportion cement sand gunite, 40 to 50 mm thick to M. S. pipe surface under 2.1 kg. per sqcm. to 2.80 kg. per sqcm. pressure including removing the loose materials as directed by Engineer-in-charge and including scrapping the surface with wire brushes, degreasing, cleaning by compressed air and providing fixing BRC fabric no.14 as reinforcement, curing for 21 days, disposing off the rebound materials within a lead of 50 M, etc. complete as directed by Engineer-in-charge.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores). For 1600 mm diameter or required at site

Providing and erecting 110 mm (OD) - 10 kg/sqcm Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete

Providing and erecting 63 mm (OD) - 10 kg/sqcm Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete

Lowering, Laying and Jointing of 110 mm (OD) H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

Lowering, Laying and Jointing of 63 mm (OD) H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

Providing, erecting & commissioning coagulant dosing pumps including panel, earthing, cables, etc. all complete

Preparation of Structural steel design and construction drawings

WILO Mather and Platt Pumps Pvt. Ltd

SMC Infrastructures pvt ltd