Installation of Floodlights LED at Bird Line Playground Prothrapur Ward No 23 Port Blair for Development of Sports and Games Activities of the Youths and also to Promote Arts and Culture activities under MPLADS

Amount

Supplying & fixing of LUKER LED 200 W LED Flood light luminaries with ultra sleek, light weight and with secondary optics made of pressure die - cast housing with IP 66 rating similar to LUKER Cat No. LFLSL200W LED (White) mounting on 100 mm channel i/c connection etc or its equivalent in Technical Specification as required.

Manufacturing and supplying of Flood Light Pole made out of 1 No 100mm dia B class ISI Marked G.I Pipe 6 Mtrs Long and 1 No 80mm dia B class ISI Marked G.I Pipe 6 Mtrs Long inserted into 100mm dia GI pipe at the Deep of 1 mtr and welded to form flood light pole of 11 mtrs Height and two nos 50mm x 25mm x 3 mm M.S channel 1 Mtr long fixed on the top of 80mm GI Pipe with necessary clamping arrangement for fixing flood light, on the top of 80mm dia G.I pipe welding with a plate to cover the hole to protect water entering in to it. The bottom of 100mm pipe to be welded with Base plate of size 300mm x 300mm x 6mm thick for foundation to be done with cement concrete and painting of one coat of metallic primer and two coats of sythetic enamel paint, fixing of SMC box of 200mm x 140 xmm X 95mm (inside) to house 4 pole 63 Amps connector and 4 pole 16 Amps MCB with clamping arrangement for SMC box including supply of 16 Amps MCB & 4 pole 63 Amps Connector etc as required

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. a) Above 8.0 metre and upto 10.0 metre

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. a) 5 x 1.5 sq. mm

Supplying of following size of XLPE insulated Heavy duty armoured Aluminium conductor UG Cable of 1.1 KV grade conforming to IS: 7098 (Part-I) and IS No. 1554 (part-I) 1988 as applicable make: CCI/Gloster/Havells/ Polycab/Finolex/ RR Cable) or equivalent a) 4 Core x 16 Sq.mm (MS)

b) 3½ Core X 25 Sqmm (MS)

Supplying and laying of One Number double walled corrugated high density polyethylene pipe having corrugated on the outer wall and plain surface inner wall confirming to IS: 14930 Part-I & II complete with necessary HDPE fitting for protection of 1.1 KV grade under ground cable directly in ground at depth of 50 cm i/c excavation and refilling the trench as required. a) 50 mm Outer dia Nominal Size

Supplying and Laying of One Number Double Walled Corrugated High Density Polyethylene Pipe having Corrugation on the outer wall and plain surface inner wall confirming to IS 14930 Part-I Complete with necessary HDPE fitting for protection of 1.1 KV Grade underground cable directly on the Surface or Wall etc., as required. a) 50 mm Outer dia Nominal Size

Laying of One Number PVC insulated and PVC Sheathed / XLPE Powder cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/ DWC pipe as required. a) upto 35 Sqmm

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2000 mm, outer dia 50 mm, inner dia 25 mm and inner space be filled with crystalline conductive mixture including filling-up with electrodite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required.(Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Supplying, Installation, Testing and Commissioning of outdoor type floor mounted cubical panel board non extendable type LT of size 0.90 m x 0.6m x 0.4m, 3 Phase, 440V, 100A with both side open i/c front double hang shutter with locking arrangement made with 2 mm thick CRCA sheet, MS Angle, MS Flat etc in different compartments to accommodate various size of switch gears, bus bar, cut out, and energy meter etc i/c supplying and fixing of following item & interconnection with suitable rating copper conductor cable. The Panel should have inner earthing with 1 Coat of Primer and 2 coat of finishing water Proof Paint, fixing of danger plate and PCC work etc., as required. a) MCCB, 4 Pole, 40 A 25 KA Breaking Capacity - 01 No. b ) MCCB 4 Pole 25 A 16 KA Breaking Capacity - 02Nos. c) Cut Out 63 Amps- 03 Nos. d) Copper Bus Bar 35 x 5 mm x 0.4 mtrs - 01 set e) Indicator for RYB f) CT Coil 100 / 5 A g) Interconnection with 6 Sq.mm PVC insulated Copper Conductor Cable

ICONAGENCIES

M/s Sai Electrical Works