Construction of Passenger Shed near NHW at Lawaypora Srinagar

Engagement of labourers for clearance of site etc.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil

Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job .

Providing & laying boulder filling got by lorries including Loading, unloading. Ramming, dressing, and all sorts of carriages complete job as per the directions of EIC

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Form work centering / shuttering including Strutting, Propping etc and removal of form work for: (a) Foudation, footings, basis, coloums etc

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including all carriages complete job . Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job. (a) (Welded.)

Providing Hi-Rib /Tile profile sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks/Self Driven Screws, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers including all carriages complete job as directed at site by engineer incharge. 0.50 mm thick

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing Fixing of 3 seater stainless steel public seating bench of approved make and pattern and of requried size and specifications including fixing with floor with nuts and bolts complete job as per the directions of EIC ( The bench should not be less than 25 kg in weight and bearing capacity should be 300-350 kg)

Providing and Fixing of Pole Mount Stain less Steel Ornamental Garden Dust Bins 50 Ltr Capacity with stand of approved make and design including all carriages and fixing charges complete. Cost shall include anchoring of base in concrete foundation (1:2:4), complete job.as per the directions of the engineer incharge

Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size )

Providing and fixing of readymade wood paneling of 12mm (net thickness) including providing and fixing of 12mm ply with screws, wooden plugs,wooden cornice including finshing with two or more coats of touchwood with fevicol wash, wood filler complete job as per directions of EIC

Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work

Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

P/F of PVC pipe/fittings line heavy duty (Prince made). (Grade-B) with fittings complete job. A) 75 mm dia

Carriage of materials by mechanical transport from source upto the site of work complete job . A) Stone agg 40mm from Athwajan 20 kms lead

b) Stone agg 20mm from Athwajan 20 kms lead

Sand from Ganderbal 16 Km lead

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage