Replacement of Damaged Door Shutters and Frames in Residential Quarters

Providing and fixing factory made P.V.C. door frame of size 50×47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15×15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19×19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. Place N L length Banglow no 96 and Qtr no 53/2 colony 2 3 0.85 2.55 6 2.1 12.6 Total Area 15.15

25 mm thick PVC flush door shutters made out of a one-piece multi-chamber extruded PVC section of the size of 762 mm × 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23 × 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 49 mm × 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm × 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Place N L W Area Bunglow no. 96 1 2 0.85 1.7 Qtr no 53/D,7, 21 &15/type3 4 2.1 0.8 6.72 colony no2 Total area 8.42

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I), non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Place N L W Area Sikanderpur : 23/I,33/ 2 nos 2 2.1 0.9 3.78 Nawapura – 47/I,46/I,36/I,2/2,96/3 total 8 no 8 2.1 0.9 15.12 Colony no 2- type2- 13/1,53A/1 total no -2 2 2.1 0.9 3.78 Total 22.68

Providing and fixing ISI marked flush door shutters conforming to IS : 2022 (Part I) nondecorative type , core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 25 mm thick including ISI marked stainless steel butt hinges with necessary screws Place N L W Area Sikanderpur : A4/1,50/1 -2 nos 2 2 0.8 3.2 Navapura: 29/2 and 97 -total 4 nos 2 2 0.8 3.2 Building no 97 2 2 0.9 3.6 Total Area 10

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Door Frame built for MS angile size 40X40 mm) Place N L W weight Bunglow no 96 & sikanderpur 50 50/Type 2 and total two door frame total weight 50

Painting with syntethic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work sqm Total area 60