Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC LOONPURIA GAON AT ROAD PANITOLA PO PANITOLA 786183 DIST TINSUKIA ASSAM | TINSUKIA | ASSAM | 786183 | ₹14.9 L Quoted ₹15.9 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹16.5 L+₹59,404 (3.74%)Rejected-Finance 01 CHANGSARI KAMRUP ASSAM 781101 | KAMRUP | ASSAM | 781101 | ₹16.5 L+₹59,404 (3.74%) | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 3 | L3₹16.9 L+₹98,566 (6.21%)Rejected-Finance 1389 RADHETENAMENT SOCIETY SARDAR ROAD SURENDRANAGAR SURENDRA NAGAR GUJARAT 363001 | SURENDRANAGAR | GUJARAT | 363001 | ₹16.9 L+₹98,566 (6.21%) | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 4 | L4₹17.3 L+₹1.4 L (8.94%)Rejected-Finance | ₹17.3 L+₹1.4 L (8.94%) | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 5 | L5₹17.8 L+₹2.0 L (12.3%)Rejected-Finance | ₹17.8 L+₹2.0 L (12.3%) | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S A K BROTHERS L1 | M/S S. P. ENTERPRISE L3 | CHETIA CONSTRUCTION L4 | FREEZCON L5 | M/S A K ENTERPRISE L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down old unserviciable induction motor of any type, any capacity from the sewage sump house at any depth and re-fixing at it's original position after repair/rewindig, without damaging any working part complete all as specified and directed. (Note:- Motor shall be repaired under relevant items) | 8 | Each Job | 10,000 ₹80,000 Lowest | 10,584 ₹84,672 | 10,839 ₹86,712 | 11,164 ₹89,312 | 10,356 ₹82,848 |
| 2.00 | M&L for rewinding of burnt squirrel cage induction motor from a reputed workshop as decided by GE, 30 HP, 3 phase ,440 V, 50 Hz of any make with super enamelled copper conductor with 99.99% purity with approx 10 to 10.5 Kg winding wire (variation more than 5% in Qty shall be adjusted @1000/Kg) of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface, writing SM/MES Nos, fixing new terminal connector block, replacement of old bearing at both end with bearing grease, complete all as specified and directed.
Notei): (New Part required for replacement shall be measured and paid as supply only.
(ii) Transportation charges for transportation of motor from site to workshop and after repair, workshop to site shall be deemed to be included in the quoted rate. | 2 | Each Job | 45,000 ₹90,000 Lowest | 47,631 ₹95,262 | 48,778 ₹97,556 | 50,241 ₹1,00,482 | 46,602 ₹93,204 |
| 3.00 | M&L for rewinding of burnt squirrel cage induction motor from a reputed workshop as decided by GE, 15 HP, 3 phase ,440 V, 50 Hz of any make with super enamelled copper conductor with 99.99% purity with approx 8 to 8.5 Kg winding wire (variation more than 5% in Qty shall be adjusted @800/Kg) of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface, writing SM/MES Nos, fixing new terminal connector block, replacement of old bearing at both end with bearing grease, complete all as specified and directed.
Note: (i) Part required new for replacement shall be measured and paid as supply only.
(ii) Transportation charges for transportation of motor from site to workshop and after repair, workshop to site shall be deemed to be included in the quoted rate. | 2 | Each Job | 30,000 ₹60,000 Lowest | 31,754 ₹63,508 | 32,519 ₹65,038 | 33,494 ₹66,988 | 31,068 ₹62,136 |
| 4.00 | M&L for rewinding of burnt squirrel cage induction motor from a reputed workshop as decided by GE, 12.5 HP, 3 phase ,440 V, 50 Hz of any make with super enamelled copper conductor with 99.99% purity with approx 7 to 7.5 Kg winding wire (variation more than 5% in Qty shall be adjusted @800/Kg) of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface, writing SM/MES Nos, fixing new terminal connector block, replacement of old bearing at both end with bearing grease, complete as specified and directed.
Note: (i) Part required new for replacement shall be measured and paid as supply only.
(ii) Transportation charges for transportation of motor from site to workshop and after repair, workshop to site shall be deemed to be included in the quoted rate. | 2 | Each Job | 28,000 ₹56,000 Lowest | 29,636 ₹59,272 | 30,350 ₹60,700 | 31,260 ₹62,520 | 28,996 ₹57,992 |
| 5.00 | M&L for rewinding of burnt squirrel cage induction motor from a reputed workshop as decided by GE, 5 to 7.5 HP, 3 phase ,440 V, 50 Hz of any make with super enamelled copper conductor with 99.99% purity with approx 3 to 3.3 Kg winding wire (variation more than 5% in Qty shall be adjusted @1000/Kg) of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface, writing SM/MES Nos, fixing new terminal connector block, replacement of old bearing at both end with bearing grease, complete all as specified and directed.
Note: (i) Part required new for replacement shall be measured and paid as supply only.
(ii) Transportation charges for transportation of motor from site to workshop and after repair, workshop to site shall be deemed to be included in the quoted rate. | 2 | Each Job | 25,000 ₹50,000 Lowest | 26,462 ₹52,924 | 27,099 ₹54,198 | 27,911 ₹55,822 | 25,890 ₹51,780 |
| 6.00 | M&L for rewinding of burnt squirrel cage induction motor from a reputed workshop as decided by GE, 2 HP, 3 phase ,440 V, 50 Hz of any make with super enamelled copper conductor with 99.99% purity with approx 1.5 to 1.60 Kg winding wire (variation more than 5% in Qty shall be adjusted @1000/Kg) of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface, writing SM/MES Nos, fixing new terminal connector block, replacement of old bearing at both end with bearing grease, complete all as specified and directed.
Note: (i) Part required new for replacement shall be measured and paid as supply only.
(ii) Transportation charges for transportation of motor from site to workshop and after repair, workshop to site shall be deemed to be included in the quoted rate. | 2 | Each Job | 22,000 ₹44,000 Lowest | 23,286 ₹46,572 | 23,847 ₹47,694 | 24,562 ₹49,124 | 22,783 ₹45,566 |
| 7.00 | Taking down old unserviciable booster motor of any type, any capacity and re-fixing at it's original position after repair/rewindig, without damaging any working part complete all as specified and directed. (Note:- booster motor shall be repaired under relevant items) | 2 | Each Job | 4,000 ₹8,000 Lowest | 4,233 ₹8,466 | 4,335 ₹8,670 | 4,465 ₹8,930 | 4,142 ₹8,284 |
| 8.00 | M&L for rewinding single phase booster motor from a reputed workshop as decided by GE, 2 to 1HP of any make with super enamelled copper conductor with 99.99% purity with approx 1.10 to 1.20 Kg winding wire (variation more than 5% in Qty shall be adjusted @1000/Kg) of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface, writing SM/MES Nos, fixing new terminal connector block, replacement of old bearing at both end with bearing grease, complete all as specified and directed.
Note: (i) Part required new for replacement shall be measured and paid as supply only.
(ii) Transportation charges for transportation of motor from site to workshop and after repair, workshop to site shall be deemed to be included in the quoted rate. | 2 | Each Job | 8,000 ₹16,000 Lowest | 8,467 ₹16,934 | 8,671 ₹17,342 | 8,931 ₹17,862 | 8,284 ₹16,568 |
| 9.00 | Supply only ball bearing suitable for induction motor of capacity 40 HP (Set of 02) complete all as specified and directed | 2 | Each | 2,000 ₹4,000 Lowest | 2,116 ₹4,232 | 2,166 ₹4,332 | 2,230 ₹4,460 | 2,071 ₹4,142 |
| 10.00 | Supply only ball bearing suitable for induction motor of capacity 15 HP (Set of 02) complete all as specified and directed | 2 | Each | 1,500 ₹3,000 Lowest | 1,587 ₹3,174 | 1,625 ₹3,250 | 1,673 ₹3,346 | 1,553 ₹3,106 |
Tender Value
Refer Docs
EMD Value
₹31,000
Closing Date
10 Jun 2026, 6:00 pmClosed
GE DINJAN
GE DINJAN
REPAIR MAINT OF SEWAGE PUMPING STATIONS NON CLOGGING PUMP SETS MOTOR PANEL BOARD INCLUDING ALLIED WORKS UNDER GE DINJAN
2026_MES_759274_2
C/8129/E8
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Item Rate
270 days
DINJAN MIL STN
Class E Category a ii
10 documents required · 10 mandatory
₹500
GE DINJAN
₹31,000
Yes
12 Aug 2026
27 May 2026
12 Jun 2026
27 May 2026
10 Jun 2026
5 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down old unserviciable induction motor of any type, any capacity from the sewage sump house at any depth and re-fixing at it's original position after repair/rewindig, without damaging any working part complete all as specified and directed. (Note:- Motor shall be repaired under relevant items) | 8 | Each Job | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_860430.xls
BOQ • 3.87 MB
8129TENDER.pdf
Tender Documents • 2.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .