Construction of control room building septic tank and PCC Sump proposed T.Ramanathapuram 33/11KVSS

Amount

Earth work excavation in hard stiff clay, stiff black cotton soil, hard red earth, shales , murram, gravel stoney earth, earth mixed with small size boulders and hard gravelly soil for foundation with an initial lead, lift, etc, complete.

Earth work excavation for foundation in soft disintegrated rock, latarite soft rock or kankar not riquiring blasting with an initial lead of 10 m and lift of 2m etc., complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5lit of water etc. complete.

Supplying and filling of river sand in foundation and basement with well water and consolidation as per specn.incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column raft foundation without formwork including cost of all materials, labour lead, litf, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, labour lead, litf, etc., complete. But excliding cost fo steel reinforcement (by using mixer machine). Upto Basement floor

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, labour lead, litf, etc., complete. But excliding cost fo steel reinforcement (by using mixer machine). Above basement level

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Grade beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excluding cost fo steel reinforcement (by using mixer machine).

RCC 1:1.5:3 mix using 12 mm to 20mm HBS metal(machine crushed) for plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excliding cost fo steel reinforcement (by using mixer machine).

RCC 1:1:5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete.

RCC 1:1:2 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 125mm Tk.

Supplying and spreading of quality red gravel for basement and low lying area including cost of material,labour for spreading lead, lift, etc. complete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone with 100mm thick, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Flooring concrete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For 100mm tk Bed block, water tank, staircase slab concrete.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:5 using Second class champer bricks for basement & ground floor super structure, including cost of all materials, all labour charges, lead, lift, etc. complete.

Brick work in CM 1:3 using II class champer burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for walls including cost of cement, all materials,curing, labour, lead and lift etc., complete. Upto basement

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

PCC 1:2:4 mix using 12-20mm HBS machine crushed metal with steel mould for sump side wall including cost of all labour, materials, lead, lift, curing, etc., complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, rcc pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Providing weathering course with good quality of readymade weather proof/Leak proof tiles laying over cm 1:3 mixed with crude oil 10% weight of cement and pointed with the same oiled mortor required slope including cost of all materials, curing,labour for applying water proof component over the terrace etc., complete.

Painting 2 coats using white cement over one coat of priming coat for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc complete.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primier coat of all materials etc complete.

Painting the outside walls with two coats of ULTIMA" Paint best quality of approved colour over a white cement primier coat of all materials etc complete.

Wearing coat of PCC 1:2:4 using 12 m below chips 20 mm thick with plastering in CM 1:3, 12 mm thick using 3.80 KB red oxide for 10 Sqm on top, including cost of all labour, lead, lift, etc., complete. But excluding cost of reinforcement.

Flooring with approved Double charged virtified tilesof non slippery type tiles approved quality, design & colour (johnson or equivalent make) laid in r cement mortar 1:3,20mm thick including pointing with white cement finishing the joints, flush pointing the surface etc., complete. (sample to be approved by Dept.Engineer)

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

M&F in position of anodised aluminiuum glazed door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg / M with everite / pioneer, floor gear rubber beedings, hinges, handle & 5mm thick sun cool glass including cost of materials, labour, lead, lift, etc., complete door size 1.20 x 2.10 m single leaf.

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door

M & F in position of anodized aluminium glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5mm tk sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.

Supply and fixing of Alu.Ventilator fully 0.75 x0.45m glazed louver type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials lead lifts labour etc complete.

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. .

Supplying and fixing in position IWC ORISSA PAN of size 580X420MM White glazed earthn ware of approved Water Closet 45cm with P/S trap confirming to IS-2556 PART xii (Parryware of equivalant) with sand cushion and forming around the closet using 40mm broken brick jelly in lime concrte 1:2:5(1/lime,2 sand,5/brick jelly) 100mm tk and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, etc, complete.

Supplying and fixing of COLOUR GLAZED Wash basin of size 24"X18" of approved quality neycer/parrys ISI including cost of wash basin without pedastal cock fixing using rag bolt and nut 15mm dia pvc connecting hose and outlet using 50mm dia pvc waste water pipe for outlet cp angle valve with all accessories including cost of all materials, labour, lead, lift, etc., complete.

Supplying ,laying and fixing in position of PVC pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. as directed by department Engineer at site 32 mm dia

Supplying ,laying and fixing in position of PVC pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. as directed by department Engineer at site 25mm dia

Supplying ,laying and fixing in position of PVC pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. as directed by department Engineer at site 20mm dia

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 32 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 25 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 20 mm dia GM Gate valve

Supplying and fixing of 15mm high quality brass screw down bib cock/ long body chromium plated such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc. complete.

Supplying and fixing of 1000 lit capacity sintex tank or equilvant make including cost of of cover with opening for inlet , out let & over flow pipeof approved quality including cost of materials labour for fixing lead lifts etc transport ., complete

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 1 No, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Supplying and fixing of best quality of mirror of size 300 x450mm mirror with soap tray, towel stand, screw and fixing near the wase basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size 90cm and fixing the same over teak wood round block and soap tray (pvc) in bath room including cost of all materials, lead, lift, etc., complete.

Supplying and fixing of PVC shower and Nickle control valve complete

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead lift, etc. Complete

Supplying and fixing of two side polished 20/30mm tk.cuddapah slab for cupboard, kitchen platform etc., including cost of all materials, labour, lead, lift, etc., complete

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Providing inspection chamber for sufficient intervels throughout the line 0.45x0.45m. Size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. cover at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM1:3 12mm thick and all lead, lift etc.complete. 0.45x0.45m size to a depth of 0.45m

Supplying and fixing CI.man hole cover of size for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete 0.60 x0.60 m CI Man hole cover

Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of pvc pipe coupling lbour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of 110mm dia slotted pvc pipe for dispersion trench with covering with roof pantiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and filling 40mm HBS metal for dispersion trench per standard specification including cost of all materials, lead lift etc. complete.

Supplying and fixing of 100mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, lead, lift etc. Complete.

Fabrication and labour charges for fixing of GI Angles of size 50x50x6mm to the required length for supporting the cable in the cable duct in correct position including labour, cutting etc complete as per the drawing and std.specification.

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

HRITHIC CONSTRUCTIONS

SHIVANI LAKSHMI CONSTRUCTION

ALAGAPPA CONSTRUCTIONS

Murugan

S.RADHAKRISHNAN

HARISH CONSTRUCTION