752740 PROVN OF ACCN FOR STUDENT OFFR AND ONE DINING HALL MESS ROOM AT CMM JABALPUR

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for 'Building Work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES in schedule 'A' Part-I.

Sch 'A' Part-II ( Internal Water supply ) Lump sum price worked out by the contractor for Internal Water Supply as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES in schedule 'A' Part-II.

Sch 'A' Part-III ( Internal Electrification ) Lump sum price worked out by the contractor for 'Internal Electrification ' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES in schedule 'A' Part-III.

Sch 'A' Part-IV (External Water supply ) Lump sum price worked out by the contractor for ' External Water Supply' as listed in Schedule 'A' Part-IVagainst the lump sum pricVe inserted by the MES in schedule 'A' Part-IV.

Sch 'A' Part-V (External Electrification ) Lump sum price worked out by the contractor for'External Electrification ' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES in schedule 'A' Part-V.

Sch 'A' Part-VI (Road,Path and Culvert ) Lump sum price worked out by the contractor for'Road,Path and Culvert ' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES in schedule 'A' Part-VI.

Sch 'A' Part-VII (Sewage Disposal ) Lump sum price worked out by the contractor for'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES in schedule 'A' Part-VII.

Sch 'A' Part-VIII (Area Drainage ) Lump sum price worked out by the contractor for'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES in schedule 'A' Part-VIII.

Sch 'A' Part-IX (Fencing & Gate ) Lump sum price worked out by the contractor for'Security Wall ' as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES in schedule 'A' Part-IX.

Sch 'A' Part-X (Boundary Wall ) Lump sum price worked out by the contractor for 'Boundary Wall ' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES in schedule 'A' Part-X.

Sch 'A' Part-XI (Connecting shed / Connecting Passage) Lump sum price worked out by the contractor for'Conecting shed ' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES in schedule 'A' Part.XI

Sch 'A' Part-XII (Site clearance, excavation & earth works ) Lump sum price worked out by the contractor for'Site clearance, excavation & earth works ' as listed in Schedule 'A' Part-XII against the lump sum price inserted by the MES in schedule 'A' Part.XII

Sch 'A' Part-XIII (Demolition Dismantling) Lump sum price worked out by the contractor for 'Denolition Dismantling ' as listed in Schedule 'A' Part-XIII against the lump sum price inserted by the MES in schedule 'A' Part-XIII.

Note for Srl No 2 to 14 The percentage above / below the SSR -2010 (part-II) rates shall be derived from the amount qouted by the contractor against Srl No. 2 to 14 by comparing it with the amount inserted / pre priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XVI (Miscellaneous works)

Item No 01 : S & F Bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia of pipe complete all as specified and directed. (Make : Jaquar Cat No - QQT-CHR-7037 or equivalent in GEM / Parco.

Item No 01(A) : S & F Stop valve cast copper alloy screwed down high pressure, fancy type chromium plated with long shank and cup (conceled type) screwed both ends for iron pipe suitable for 15 mm bore, complete all as specified and directed. (Make : Jaquar Cat No - QQT-CHR-7053 or equivalent in GEM / Parco.

Item No 01(B) : S & F Stop valve cast copper alloy screwed down high pressure, fancy type chromium plated with long shank and cup (conceled type) screwed both ends for iron pipe suitable for 25 mm bore, complete all as specified and directed. (Make : Jaquar Cat No - QQT-CHR-7053 or equivalent in GEM / Parco.

Item No 01(C) : S & F Brass CP basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore.

Item No 01(D) : S & F Brass CP Wall mixer concealed type for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore.

Item No 01(E) : S & F Brass chromium plated shower rose 125 mm size with or without swivel joints with and including shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour.

Item No 01(F) : S & F Polythene (PVC) pipe connection suitable for 15 mm dia GI pipe/ stop cock/ pillar tap, 450 mm long including heavy brass union at each end, screwed one end to GI pipe & other end to stop cock/ pillar tap complete all as specified. (Make : Pragag or equivalent make)

Water Cooler

Item No 02 : Supply and fixing self contained drinking water cooler partially stainless steel working with non CFC refrigerent of above 3 star rating suitable for operation on 230 Volts 50 cycles AC supply having approx storage and nominal cooling capacity 40/80 Ltrs (approx storage capacty of 80 litre and normal cooling capacity of 40 litre per hour) and including making of PCC platfarm of suitable size as directed for fixing of water cooler with necessary inlet,outlet and drain out connections complete all as specified and directed.

Item No 02(A) : Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilised at 230 V with accecories of + 2.5% and capacity 1 KVA complete all as specified and directed.

Desert Cooler

Hot Water

Item No 04: S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner contaner of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI marked including 04 Nos of old fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and directed. Make : Bajaj/Havells

Air Conditioning

Item No 05 : Supply and Installation, commissioning of wall mounting air cooled split type unit air conditioner electric driven single phase indoor unit and outdoor unit with cordless remote control unit and with in built airioniser and plasma filter for better indoor air quality cutting, brazing and connecting the copper pipe of size 1/2 inch and 1/4 inch size of pipe of required length and making holes as for passing of copper pipes and electric cables and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfactioning, 5 star rating, confirming to IS-1391 Para II 1992 herimatically sealed air compressor working with Non CFC refrigerent suitable for wall mounting with MS brackets of capacity 2.0 Ton complete all as specified and directed. Make : Voltas Cat Part No. 185VAZ18/Carrier / Bluestar

Item No 06 : Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 5 KVA suitable for A/C complete all as specified.

Internal Electrification

Item No 07 : Taking down existing point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc complete all as specified.

Item No 08 : Taking down ceiling/ exhaust fan of any size/sweep after disconnecting the wire from existing ceiling rose and hand over AGE E/M (East) Jabalpur store yard complete all as specified and as directed.

Item No 09 : Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Item No 10 : Taking down the existing service cable/ sub main wiring of any type/ description as existing at site complete all as specified.

Item No 11 : M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories, heavy duty ISI marked after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No 12 : Description all as per item No. 11 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly..

Item No 13 : Description all as per item No. 11 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for AC point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No 14 : M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No 15 : M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No 16 : S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Item No 17 : S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No 18 : S & F for sheet metal enclosure MCB DB TPN 6 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No 19 : S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No 20 : S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 21 : S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 22 : S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No 23 : S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps complete all as specified and as directed complete all as specified and as directed.

Item No 24 : S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

Item No 25 : S & F for Decorative wall mounted luminaire stainless steel finish double arm type suitable for B-22 LED bulb holder including provosion of LED bulbs 5/6 watts complete all as specified and as directed. Make: philips Cat Part no. 31455 or equivalent in Wipro/Bajaj

Item No 26 : S & F for LED tube light fitting 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make: philips Cat Part no. BN021LED12S 6500 PSU GR or equivalent in Wipro/Bajaj

Item No 27 : S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: philips Cat Part no. WT140WLED7SCW PSU S1 PC or equivalent in Wipro/Bajaj

Item No 28 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: philips Cat Part no. BN021CLED 22S PSU CW GR or equivalent in Wipro/Bajaj

Item No 29 : S & F for surface mounted 2' x 2' square LED panel 36 watts, to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination complete all as specified and as directed by Engineer- in-charge. Make: philips Cat Part no. RC 380B LED 36 S-6500 G5L60W 60 PSUOD or equivalent in Wipro/Bajaj

Item No 30 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make: philips Cat Part no. DRP042PLED25 CWS LE S1 PSU GRP 4210 or equivalent in Wipro/Bajaj

Item No 31 : S & F for ceiling fan, 230 Volts, 1200 mm sweep with service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed. Make: Usha/ Crompton/Bajaj

Item No 32 : S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in Sch "A" Part-I). Make: Havells / Crompton/Bajaj

Item No 33 : BLANK

Item No 34 : S& F for Single Phase Electronic Energy Meter accuracy Class 1.0, 240V, with in-home display 5-30 A, 3 nos self locking meter seal, mounted in hinged type polycorbonate box, LCD diplay with optical port, anti temper features, LCD test ,serial no, Date, RTC,Cumulative Kwh, Last bill Kwh, Instanteous Load, Last bill MD, Instantaneous KW,Volts,PF,HZ, MD, total Tamper Count, Self Billing Code, Battery backup in absence of power for display active energy kwh, including all necessary incoming and out goinig connections complete all as specified and as directed Make- L&T, Cat No:WM101BC5DDHBOX / Secure/HPL)

Item No 35 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

External Water Supply

Item No 36 : Supply and Fix for Cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos of size, 80 mm (3”) dia complete all as specified and directed.

Item No 37 : Supply and Fix for gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe of size 50 mm bore complete all as specified and directed.

Item No 38 : Supply and Fix for gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe of size 25 mm bore complete all as specified and directed.

Item No 39 : M & L for cutting existing CI water mains 100 mm dia in position for insertion of tee, branch line etc to new water connection complete all as specified and directed.

Item No 40 : M & L for cutting existing GI tubing 80 mm dia in position and screwing the pipe of both sides for insertion of tee reducer 80 x 50 mm dia for branch line etc to new water connection complete all as specified and directed.

Item No 41 : M & L for CI fitting 100 mm dia bore for Tee equal (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

Item No 42 : M & L for construction of Brick Masonry Valve Pit, one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in any type Soil of following sizes complete all as specified and as directed.

(a) 900 mm x 900 mm x 900 mm

(b) 600 mm x 600 mm x 600 mm

External Electrical Supply

Item No 43 : Supplying, install and erection of 4 pole structure complete in true vertical position steel tubular swaged welded pole complete with MS base plate 6 mm thick and of size 300 x 300 mm, final taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S. tubing conforming to IS-2713 part-II type 410 SP-55 (11 metre long) including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting with synthetic Enamel Paint (First Grade/quality) black & yellow colour at lower portion of exposed pole starting from plinth block band of 1200 mm height (4 Nos each Strip of 150 mm width) complete all as specified and directed.

Item No 43 (A) : Supplying, install and erection of 2 pole structure complete in true vertical position steel tubular swaged welded pole complete with MS base plate 6mm thick and of size 300 x 300 mm, final taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S. tubing conforming to IS-2713 part-II type 410 SP-55 (11 metre long) including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting with synthetic Enamel Paint (First Grade/quality) black & yellow colour at lower portion of exposed pole starting from plinth block band of 1200 mm height (4 Nos each Strip of 150 mm width), painting pole No by the black paint by stenciled letters/figures of 8 cm height complete all as specified and directed.

Item No 43 (B) : Supplying, install and erection in true vertical position steel tubular swaged welded pole complete with MS base plate 6mm thick and of size 300 x 300 mm, final taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW MS tubing conforming to IS-2713 part-II type 410 SP-31 (9.0 metres long) Swan Neck type including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting with synthetic Enamel Paint (First Grade/quality) black & yellow colour at lower portion of exposed pole starting from plinth block band of 1200 mm height (4 Nos each Strip of 150 mm width) complete all as specified and directed. Note for item No 43, 43(A) & 43 (B) :- Earthwork, Cement Concrete, cross arms etc. will be measured and paid under approprite Items.

Item No 43 (C) : Supply, install, test and commission step down transformer, outdoor type, and conforming to IS 1180:2014, plinth mounted, HT 11 KV, 3 phase 433 volts, 4 wire, 50 Hz, delta/star connected, vector group DYN -11 double copper wound, ONAN, manual type off load tap changing facility on HT side to vary secondary voltage from minus 7.5% to plus 7.5% in steps of 2.5 %, continuous rating of capacity 200 KVA including bushing on HT end cable box on LT side. The Transformer shall be complete with all standard fittings and accessories, gauges, first fill of transformer oil IS 335 ISI marked filtered & dehydrated oil etc, complete all as specified and directed and comprising of the following accessories :-

(a) One cable box on primary HV side having cable glands suitable for OH conductor(consisting of 3 Nos porcelain HT bushings with brass/gun metal bushing rods complete with nuts and washers). (b) One cable box on secondary (LV) side consisting of 4 Nos porcelain bushing with GM bushing rods complete with GM nuts, and washers with one No cable gland suitable for reception of outgoing LT armoured cables of suitable size. (c) Oil conservator tank with filter type, drain valve and oil level gauge. (d) Dehydrating breather with first fill of dehydrating agent. (e) Thermometer pocket on tank cover.

(f) One No 100mm dia dial type thermometer vapour pressure type having range 0-120 degree centigrade with temp reading pointer, max temp indicator and resetting device. (g) Rating plate with terminal markings. (h) Two earthing terminals on tank/tank cover to facilitate fixing of 32x6m GI eath strip. (j) Oil Level gauge. (k) Oil drain and filter valves. (l) Oil filler hole with cap/plug with connections complete. (m) Lifting lugs. (n) Air relief valve plug. (o) Four plan solid cast steel detachable rollers. (p) First fill of fresh oil conforming to relvant IS and tested upto 50 KV dielectric strength upto top of core. (q) Extra bushing for neutal outside the LT cable box for providing independent earthing for neutral.

(r) Provision of 2 Nos danger boards 250 x 200mm size made out of 1.6 mm thick MS plate, vitreous enameled white, with letters, figures of vltage and conventional skull and bones in signal red colour, one at HT side and other on LT side. (s) Any other fittings/accessories so as to confirm the whole transformer to IS-1180 Part-I:2014. (t) Construction of Plinth of size 2.0mx 2.0mx1.5m for transformer, using 100 mm thick PCC 1:4:8 type D-2 as in lean concrete, flyash brick masonry in CM 1:6, the top of the plinth shall consist of 100 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) over 75 mm thick PCC 1:4:8 type D-2 over compacted moorum filling, 10 mm thick rendering in CM 1:4 on brick surface with and including 25 cm thick stone aggregates of size 12.5 mm all around upto and including 1.5 m from the edge of the plinth including the RCC Gate and fencing with angle iron post in lieu of RCC post complete all as specified, directed by the Engineer-in-charge and as shown on TD drawing No CEJZ/98/TD/6, Sheet No 2/2.

Item No 44 : M & L for cable end jointing kit 11 KV (Earthed ) grade cable for outdoor termination cold shrinkable type joint complete with jointing material and accessories suitable for HT XLPE armoured aluminium conductor cable of size 3 core x 95 sqmm complete all as specified and directed.

Item No 45 : Supply and lay test and commissioning HT XLPE cable, insulated, screended, PVC bedded, galvanised steel strip or wire armoured, electic power cable (heavy duty) with multistaranded aluminium conductor, conforming to IS : 7098 (Part II), 11000 Volts "E" grade, cross sectional area 3 core 95 sqmm (Earthed) laid in trenches/ ducts/under plinth floors passing through pipes etc, fixed on wall complete all as specified and directed.

Item No 46 : Supply,laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated and PVC shealhed, armoured, with multi stranded aluminum conductor, heavy duty conforming to latest relevant IS, including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all jointing/connecting material of required size, cables laid in trenches/ducts/under plinth floors passing through pipes, fixed on wall etc,complete of following sizes :-

(a) 3.5 core 240 sq mm.(Transformer to LT Panel)

(b) 3.5 core x 50 Sq mm.(LT Panel to Prop Bldgs)

(c) 3.5 core x 35 Sq mm. (LT Panel to Prop Bldgs)

(d) 4 core x10 Sq mm. (LT Panel to security lights)

Item No 47 : S & F Cable route indicator / Marker made up of PCC Block in cement mortar 1:3:6 ( 20 mm graded aggregrate ) of size 900 x 300x 100 mm thick with DANGER / 11 KV CABLE /MES embossing on cable route Indicator / Marker including painting as per approved colour and buried in ground 45 Cms including necessary earth work ( as required / ordered at site) complete all as specified and as directed.

Item No 48 : S & F Cable route indicator / Marker made up of PCC Block in cement mortar 1:3:6 ( 20 mm graded aggregrate ) of size 900 x 300x 100 mm thick with DANGER / 440 VOLTS, LT CABLE /MES embossing on cable route Indicator / Marker including painting as per approved colour and buried in ground 45 Cms including necessary earth work ( as required / ordered at site) complete all as specified and as directed.

Item No 49 : S & F Junction Box for Street Lights of size 300 x 250 x 150 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts complete all as specified and directed.

Item No 50 :S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with warranty option of 5 years from date of installation and all accessories fixed on GI pipe 50 mm dia including necessary electrical connections from fitting to junction box with provision of 4 sq mm three core copper conductor cable multi stranded from fitting to junction bom as required complete all as specified and directed. Make: philips Cat Part no. BGP300LED 40T57 PSU PCINS1 or equivalent in Wipro/Bajaj

Item No 51 :S & F for Energy saving new generation environmental friendly LED street light luminaire with long life versatile pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection with high power LEDs as light source and electronic driver with warranty option of 5 years from date of installation of capacity 45 watts with pre wired and necessary mounting arrangements including provision of 4 sq mm three core copper conductor cable multi stranded from fitting to junction box and necessary GI pipe medium grade 4 braket of required dia 1.5 mtr long bend to required shape with suitable with MS clamps made out of flat iron of size 40 x 6 mm - 02 sets, bolt & nuts complete all as directed. Make: philips Cat Part no. BRP052LED045CW SLMR FG S1 PSU GR or equivalent in Wipro/Bajaj

Item No 52 :Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 1200 mm x 1200 mm x 400 mm (over all dimension) made out of 3.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories all complete as specified and as directed. NOTE: Rate of earthwork and PCC work are deemed to be inclusive in this item. ( Near Transformer)

OUTGOING (a) MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links -04 Nos (b) MCCB, adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links -01 No (c) Supply and fixing MCB TPN 32 Amps 10 KA, 'C' series including connection complete all as specified and directed.- 02 Nos (d) Multifunctional Digial type timer Switch (Astro type having longitude and latitude of Indian cities memory) 240 volts AC Single Phase - 01 No (e) Power contractor 32 amps 3 Pole 415 Volts AC - 01 No (f) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

Item No 53 : M & L for Earthing with 600x600x6.00 mm Galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5 m below ground level, connected to and including Galvanised steel Strip of size 32 x 6 mm by means of bolts, nuts and check nuts and washers of galvanised steel with and including 40 mm dia GI medium grade pipe for protection of GI strip to the extent of 7.5 metres as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical Plate No. 3 of SSR Part I (2009) including PCC foundation / chamber in mix 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover with provision of locking arrangement and 20 mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement, complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed. Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Item No 54 : M & L for Earthing with 600x600x3.00 mm Copper earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5 m below ground level, connected to and including copper earth Strip of size 25 x 3 mm by means of bolts, nuts and check nuts and washers of copper with and including 40 mm dia GI medium grade pipe for protection of GI strip to the extent of 7.5 metres as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical Plate No. 3 of SSR Part I (2009) including PCC foundation / chamber in mix 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover with provision of locking arrangement and 20 mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement, complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed. Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Item No 56 : M & L for Earthing with 600x600x6.00 mm Galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5 m below ground level, connected to and including Galvanised earth wire of size 4.0 mm dia by means of bolts, nuts and check nuts and washers of galvanised steel with and including 15 mm dia GI medium grade pipe for protection of GI strip to the extent of 7.5 metres as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical Plate No. 3 of SSR Part I (2009) including PCC foundation / chamber in mix 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover with provision of locking arrangement and 20 mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement, complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed. Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Item No 57 : Material and labour for road marking with reflective thermoplastic painting of 2.0mm thickness, best quality, white/yellow reflective TRM (crystalex) conforming to specifications laid down by the indian roads congress and BS-3262, with 20% glass beads (intermixed) spread and laid by automatic mechanical machine, edriven, over a coat of primer as per manufacturer's instructions, in trips of desired pattern, width as directed including preparation and cleaning of old surface complete all as specified and directed. Make: SHIVALIK PRISMO INDIA PVT LTD / RELIANCE / ASIAN

Item No 57 (A): S&F machine pressed precast coloureed concrete interlocking paver block any shape and size of 60 mm thickness, with grey cement and pigment complete all as specified and directed.

Item No 57 (B): S&F machine pressed precast coloureed concrete interlocking paver block any shape and size of 80 mm thickness, with grey cement and pigment complete all as specified and directed.

Item No 58 : Construction of Brick masonry SEPTIC TANK for 50 users in foundation in PCC 1:2:4,brick work in CM (1:4),RCC slab cover in cluding RCCprecast manhole cover having 6mm MS plate embedded all around /fibre reinforcement cover with angle iron frame vent shaft and sludge chambers including all excavation & earth works in any type of soil, complete all as specified and as shown on drawing.

Item No 59 : Construction of brick masonary SEPYTIC TANK for 25 users in foundation in PCC 1:2:4, brick work in CM (1:4), RCC slab cover in including RCC precast manhole cover having 6mm MS plate embedded all around / fibre reinforcement cover with angle iron frame vent shaft and sludge chambers including all excavation & earth works in any type of soil, complete all as specified and as shown as drawing.

Item No 60 : Construction of Soak well of size 1.8 meter dia and 3 meter deep, in foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete including intercepting chamber,screen chamber, brick work in CM, RCC cover slab in M-25 /RRmasonry/filling with bricks bats including all excavation & earth works in any type of soil, complete all as specified and as shown on drawing.

SCHEDULE OF CREDIT Schedule of credit of Rs 35784.00 inserted by the MES in schedule of credit shall be deducted manualy to work out bid amount.