Special Repair and external painting of Type VI Bungalow and Type IV quarters in Pipeline and CH Area for the year 2023-24 and 2024-25.

Amount

Dismantling doors, windows shutters including chowkhats,architrave, holdfasts,etc. complete and stacking disposal of material as per direction of EIC. Of area 3sq. Metres and below.

Dismantling doors, windows shutters including chowkhats,architrave, holdfasts,etc. complete and stacking disposal of material as per direction of EIC. Of area beyond 3 sq. metres.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres as per direction of EIC Nominal Concrete Mix 1 :3:6 or richer mix.

Demolishing reinforced cemenrt concrete manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metre lead as per direction of EIC.

Demolishing Brick work in cement mortar manually/ by mechanical means including stackng of serviceable material and disposal of unserviceable material with in 50 metre lead as per direction of EIC. In Cement Mortar.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metre lead.

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. 15 mm to upto 40mm nominal bore

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. Above 40mm nominal bore

Dismantling steel work in single section including dismembering and stacking within 50 metreleadin : Channels, angles, tees and flats.

Dismantling CI pipe Including excavation and refilling trenches after taking out the pipes, manually / by mechanical means breaking lead caulked joints, melting of lead and making in to blocks including stacking of pipes & lead at site with in 50 metre lead as per direction of engineer in charge : up to 150 mm diametre:

Supply Chemical emulsion in sealed containsers including delivery as specified. Chlorpyriphos/ Lindane emiulsifiable cocentrate of 20 %.

Supplying and filling plinth with sand under floor including watering, ramming, consolidating and dressing,complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains(not exceding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom,lift up to1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, side of foundations etc. in layer not exceeding 20 ems in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift uoto 1.5m.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work uoto plinth level. 1:2:4 (1cement:2coarse sand: 4graded stone aggregate 20mm nominal size.)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

RCC work in walls, beam suspended floors, roofs having slop up to 15 degree landing , balconies, shelves, chajja, lintels, bands, plain window sill ,stair case and spiral stair cases above plingth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1cement:1.5coarse sand: 3graded stone aggregate 20mm nominal size.)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centring and shuttering including strutting, propping, etc. and removal of form for: Foundation, footings, bases of columns, etc.

Centring and shuttering including strutting, propping, etc. and removal of form for: Suspended floor, roof, landing, shelves, beams, columns balconies, etc.

Centring and shuttering including strutting, propping, etc. and removal of form for: Weather Shade, chajjas, corbels, etc. including edges

Brick work with common brunt clay F.P.S (Non Modular) bricks of class designation 7.5 in foundation and plingth: in Cement mortar 1:6 (1cement : 6 coarse sand)

Brick work with common brunt clays F.P.S (non modular) brick of class designation7.5 in super structure above plingth level upto floor V level in all shapes and sizein cement mortar 1:6 ( 1Cement : 6 Coarse Sand).

Half brick masonary with common burnt cly F.P.S (non Modular ) brick of class designation75 in super structure above plingth to floor V level. Cement mortar 1:4(1 cemt : 4 coarse sand)

Structural steelwork single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steelwork riveted,bolted or welded in builtup section, trusses and framework including cutting hoisting and fixing in position and applying priming coat of approved steel primer all complete.

Providing & fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fitting complete including applying a priming coat of approved steel primer. Using M.S angle 40x 40x6 mm for diagonal braces.

Cement concrete flooring 1 :2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 1 :2:4 with floating coat of neat cement punning. 40mm thick with 20 mm nominal size stone aggregate.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding panelling which will be paid for separately, all complete as per direction of Engineer in Charge.Second class teak wood 30 mm thick (Note:Butt hinges and necessary screw shall be paid separately)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. PLy wood 5ply, 9 mm thick, Decorative plywood both side decorative veneer (Type-1) conforming to IS 1328 BWR type.

Providing and fixing IS: 12817 marked stainless steel butt hinges stainless steel screw etc. complete: size 100x58x1.9mm

Providing and fixing IS: 12817 marked stainless steel butt hinges stainless steel screw etc. complete: size 75x47x1.8 mm

12 mm cement plaster of mix. 1:4 (1cement : 4 coarse sand)

15 mm cement plaster on rough side. 1:4 (1cement : 4 coarse sand)

6 mm cement plaster for ceiling of mix 1:3 (1cement : 3 fine sand)

Neat cement punning.

Applying priming coat with ready mix pink or grey primer of approved brand and manufecture on wood (hard and soft wood) on wood work.

Applying priming coat : ready mix red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works.

Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work

White washing with lime to give an even shade (old work) two or more coats.

Finishing walls with Acrylic Smooth exterior paint of required shade. Old Work (Two or more coat applied @ 1.67 ltr/10sqm) on existing cement paint surface.

Applying priming coats with primer of approved brand and manufacture having low VOC (Volatile Organic Compound) Content. With water thinnable cement primer on wall surface having VOC Content less than 50 grams/litre.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth inculding necessary repairs to scratches etc. complete

Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 75 mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 110mm dia

Providing and fixing PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree size 75 mm bend.

Providing and fixing PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degreesize 110 mm bend.

Providing and fixing PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Shoe (Plain) size 110 mm .

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Grading roof for water proofing treatment with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with waterproofing material.

Providing & laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including testing of joints,etc. complete.150 mm dia R.C.C pipe

Providing and fixing white vitreous china water closet approved make.Orissa pattern WC pan 580 x 440mm

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work) 15mm NB

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work) 20mm NB

P/F GI union in GI pipe including cutting and threading the pipe and making long screws etc. complete (New Work) 25mm NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.15 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.20 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the wall etc.25mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c making good the walls etc. Concealed pipe, including painting with anti corrosive bitumastic paint,cutting chases and making good the wall:15 mm dia NB

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c making good the walls etc. Concealed pipe, including painting with anti corrosive bitumastic paint,cutting chases and making good the wall:20 mm dia NB

Making connection of GI distribution branch with GI mains of following sizes by providing and fixing TEE/elbow/bend, including cutting and threading the pipe etc. complete.25 to 40mm dia

P/F C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15mm nominal bore

P/F C.P brass stop cock (concealed) of standrad design and of approved make conforming to IS 8931. 15mm nominal bore

Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Enginineer-in-charge, beeyound 50 m initial lead for all leads including all lifts involved.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Lettering with black japan paint of approved brand and manufecture

Providing and fixing brass bib cock of approved quality :15 nominal bor

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy bprimer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) --- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. Old work (two or more coats) including removing, scrapping, sand papering and preparing the surface smooth including necessary repairs with plaster of paris where necessary, etc complete.

Diluting and injecting chemical emulsion for post construction anti-termite treatement (Excluding the cost of chemical Emulsion):Along the external and internal wall below concrete or masonary apron/ floor using chemical emulsion @ one liter per hole apart 300 mm including drilling 12 mm dimeter and plugging with cement mortar 1:2 (1 cement : 2 sand) to the full depth of hole.With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.

Providing and fixing MS welded mesh of required width, mesh size 25mm x50 mm made of ms wire of dia 3 mm including strenthening with welding or nuts, bolts and washer as required complete asper direction of Engineer in Charge.

Dismantling of water closet pan ( European type/Indian type) including disposal of material within 50 metres as per direction of EIC from site. .

Dismantling PVC or CI Drainage /Sanitary /Rainwater pipe From wall surface including stacking of pipes & lead at site with in 50 metre lead as per direction of engineer in charge : up to 150 mm diametre:

Providing and fixing of brass gate valve (Zoloto Make).15mm NB

Providing and fixing of brass gate valve (Zoloto Make). 20mm NB

Providing and fixing of brass gate valve (Zoloto Make). 25mm NB

Removing & Refixing of grill on boundary wall complete as per direction of Engineer in Charge.

P/F chicken mesh on the masonary or RCC work as per the direction. The chicken mesh should be fixed with nails/screws to the wall or RCC.

Providing and apply on white cement based putty of average thickness of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth up to floor V from ground level, complete.

Exta providing and fixing 1 mm thick MS sheet in grill door.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). With float glass panes of 5.0 mm thickness

Providing and fixing roller in Aluminiun Window/ Cupboard Shutter.

Providing and fixing star lock in Aluminium Shutter.

GLORY ENGINEERING

Shiva and Co