SPECIAL REPAIR OF APPROACH PATHWAY AND ALLIED WORKS IN CC 96 98 99 101 AND 104 IN HC STUDENT OFFRS MD ACCN UNDER GE AWC MHOW

Amount

Excavation over areas, n. exc. 1.5M deep and getting out in soft/loose soil etc complete all as specified and directed.

Removing excavated material (soil) to a distance exceeding 250M but not. exc. 500 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point complete all as specified and directed

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded agrregate as in Sub base floor/ Pavings complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and any position inot otherwise specifically provided for complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises etc complete all as specified and directed.

M & L for 16mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granit complete all as specified and directed

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work built in cement mortar (1:6) using sub class “B” bricks (old) size bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M &L for preparation of newly plastered surface of wall and applying three coats of white wash on walls complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,complete all as specified and directed.

S&F 110mm, PVC SWR pipes single socketed in any length with rubber ring joints, laid in floor, trenches complete all as specified and directed.

S&F 75mm, PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) bends, any radius of 110 mm bore complete all as specified and directed.

S & F PVC (SWR) bends, any radius of 75 mm bore complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securing with clips, etc complete all as specified and directed.

M&L for pre-cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 etc complete all as specified and directed.

M&l for Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundation etc or for shafts, wells cesspits manholes, pier holes, etc not exc 10 Sqm on plan and not exc 1.5 m depth in soft / loose soil etc etc complete all as specified and directed.

M&L for returning, filling in including spreding, levelling, watering and well ramming in layers not exc 25 cm in any type of soil etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of watertanks and similar work confirming to FE -290 Gde E-165 etc complete all as specified and directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n.exc 10cm in width or girth and priming with red oxide Zinc chrome and applying two coat of synthetic enamel paint etc complete all as specified and directed.

M&L for FE 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering, doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing etc complete all as specified and directed.

S&F mild steel plain sheet 1.0 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing and plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required etc complete all as specified and directed.

r.s.jain & sons (BID ID -3468677)

M/S UnitedConstruction (BID ID -3469606)

APconstruction (BID ID -3470129)

sunway associates (BID ID -3469923)

ASHISH SHARMA (BID ID -3470164)

AGARWAL BUILDERS (BID ID -3470191)

M/s. Shubh constructions (BID ID -3465441)

M/s ESS KAY Construction (BID ID -3469637)

Bharadwaj Builders (BID ID -3470122)