M&R OF CIVIL,PL,ELEC,DU&STP UNDER MP AND GJ STATE

VETRIFIED TILE SKIRT — PROVIDING AND FIXING VITRIFIED TILES SKIRTING 100 MMINHEIGHT USING C.M.BEDDING 1:3 AND FIXED WITH NEATCEMENTSLURRY. RATE TO INCLUDE ALLNECESSARY CHIPPING OFBRICKCONCRETE/CONCRETE SO THAT SKIRTING ISPROJECTINGUNIFORMLY6 MM FROM WALL SURFACE. (MAKE AND SHADE OF TILESHOULDBESAME AS OF FLOORING). ALL VERTICAL JOINTS OFSKIRTING SHALLMATCH WITHFLOOR TILE SPACING UNIFORMLY ASPER STANDARDSPECIFICATIONS AND EICDIRECTIONS.

TANK CLEANING 9/16/2 — CLEANING OF TANK, REMOVAL OF LEFT OUT PRODUCT, WATERUPTO10% OF THE TANK CAPACITY VALUE CONSIDERING DEAD STOCKFORTHAT RESPECTIVE TANK. THIS INCLUDES MANHOLEOPENING,REMOVAL OF NUTS AND BOLTS, REMOVAL OF PRODUCT/WATERANDCLEANING OF TANK. FOR PRODUCT ABOVE 10% OF TANKCAPACITY,ANOTHER ITEM OF DEAD STOCK REMOVAL TO BE USED.

SPLY & FIX RISER PIP — SUPPLY AND FIXING OF 80MM MS RISER (CLASS B) OF ABOUT400MMLENGTH WITH THREADED METAL CAP FOR INSTALLATION OFATGPROBE IN MS TANK IN RETAIL OUTLETS FOR AUTOMATION.THERISER HAS TO BE CONNECTED TO THE MANHOLE BY MEANSOFFLANGE/SOCKET JOINT. JOB INCLUDES REMOVAL, MODIFICATIONANDREFIXING OF MANHOLE, SUPPLY AND FIXING OF NEWGRAPHITEASBESTOS GASKET IN THE MANHOLE. ALL THE EXISTINGNUT BOLTSOF THE MANHOLE ARE TO BE REPLACED BY NEW NUT BOLTSOF SAMESPECIFICATION

PRESSURE TEST 16/22/ — PRESSURE TEST 16/22/35 KL TANK: TESTING OFUNDERGROUNDSTAINLESS STEEL TANK AT SITE OF 16/22/35 KLCAPACITY. THEJOB INCLUDED SUPPLY OF WATER ALONG WITHTESTING THE SAMEWITH PRESSURE PUMP AT A PRESSURE OF 5 KG.THE JOB INCLUDEDREMOVING THE BALANCE PRODUCT FROM THE TANKAND FILLING THESAME WITH GOOD QUALITY POTABLE WATERCONNECTING THE TANKWITH FLANGE, SUPPLY AND FIXING REQUIREDNIPPLES AND TESTINGAND THEN REMOVAL OF WATER AND CLEANINGTHE SAME TILL THETANK BECOMES DRY.

PRESSURE TEST 9 KL T — PRESSURE TEST 9 KL TANK: TESTING OF UNDERGROUNDSTAINLESSSTEEL TANK AT SITE OF 9 KL CAPACITY. THE JOBINCLUDEDSUPPLY OF WATER ALONG WITH TESTING THE SAME WITHPRESSUREPUMP AT A PRESSURE OF 5 KG. THE JOB INCLUDEDREMOVING THEBALANCE PRODUCT FROM THE TANK AND FILLING THESAME WITHGOOD QUALITY POTABLE WATER CONNECTING THE TANKWITH FLANGE,SUPPLY AND FIXING REQUIRED NIPPLES AND TESTINGAND THENREMOVAL OF WATER AND CLEANING THE SAME TILL THETANKBECOMES DRY.

22/ 35 KL PHYSICAL C — 22/35 KL PHYSICAL CALIBRATION AND TANKDIMENSION:CALIBRATION OF 22/35 KL TANK BY FILLING POTABLEWATER ASPER IS CODE. THE JOB INVOLVES COST OF WATER, FLOWMETER,DECANTING THE REMAINING PRODUCT FROM TANK, OPENINGPIPELINEFITTING AND REFIXING THE SAME IN ORIGINALCONDITIONINCLUDING STORING THE TANK PRODUCT SAFELY IN DRUMSANDCALIBRATING THE TANKS. THE VENDOR NEEDS TOSUBMITCALIBRATION CHART AFTER CALIBRATION WITH ACTUALINTERNALDIMENSION OF TANK. THE COST INCLUDES CLEANING ANDDRYINGTANK AFTER CALIBRATION AND REFILLING THE TANK WITHPRODUCTETC COMPLETE.

16/9 KL PHYSICAL CAL — 9 KL/16 KL PHYSICAL CALIBRATION AND TANKDIMENSION:CALIBRATION OF 9 KL/16 KL TANK BY FILLING POTABLEWATER ASPER IS CODE. THE JOB INVOLVES COST OF WATER,FLOWMETER,DECANTING THE REMAINING PRODUCT FROM TANK, OPENINGPIPELINEFITTINGAND RE-FIXING THE SAME IN ORIGINALCONDITIONINCLUDING STORING THE TANK PRODUCT SAFELY IN DRUMSANDCALIBRATING THE TANKS. THE VENDOR NEEDS TOSUBMITCALIBRATION CHART AFTER CALIBRATION WITH ACTUALINTERNALIMENSION OF TANK. THE COST INCLUDES CLEANING ANDDRYINGTANK AFTER CALIBRATION AND REFILLING THE TANK WITHPRODUCTETC COMPLETE

MANHOLE MODIFICATION — MODIFICATION OF TANK MANHOLE COVER BY CUTTING THE MANHOLECOVER AND PROVIDING 100 MM DIA SPACE FOR INSTALLATIONOFSTP INCLUDING PROVISION OF RISER PIPE AS PERREQUIREMENTFOR STP ASSEMBLY INSTALLATION. JOB INCLUDESOPENING OFMANHOLE COVER INCLUDING REMOVAL OF EXISTINGPIPELINE ANDFITTINGS, CARVING A HOLE WITH GAS CUTTING INEXISTINGMANHOLE COVER PROVIDING SPACE FOR STP INSTALLATION.NO HOTWORK (GAS CUTTING/WELDING) IS PERMITTED AT SITE.CHECKVALVE REMOVED FROM EXISTING SUCTION LINE SHOULD BEHANDEDOVER TO HPCL. REFIXING THE MANHOLE COVER ALLCOMPLETE.PAYMENT OF NEWELY FIXED NUT BOLTS WILL BE MADEUNDERSTRUCTURAL STEEL ITEM SEPARATELY. PAYMENT OF GASKETFIXEDWILL BE MADE SEPARATELY UNDER RESPECTIVE ITEM

VENT PIPE CLEANING B — CLEANING OF VENT PIPE OF TANKS BY AIR COMPRESSOR. THEJOBINVOLVES DISCONNECTING THE VENT PIPE FROM TANKMANHOLE,CLEANING THE CLOG PART OF PIPELINE BY COMPRESSORANDREFIXING THE SAME WITH EXISTING PIPELINE FITTING ORNEWPIPELINE FITTINGS (IF REQUIRED). NOTE. THE RATEINCLUDESABOVE GROUND PART OF PIPELINE AND UNDERGROUND PARTALSO.

CHANGING MANHOLE GAS — TANK MANHOLE GASKET: SUPPLY AND PROPER FIXING OF 3MMTHICKNESS COMPRESSED ASBESTOS FIBRE JOINTING SHEETGASKETPACKING CONFORMING TO IS 2712-1998 (APPROVED MAKE,APPROVEDSTYLE 59 OIL) BETWEEN MANHOLE COVER AND TANK. JOBINCLUDESALL NECESSARY OPENINIG OF THE MANHOLE, UNTIGHTENINGANDTIGHTENING OF CONNECTED PIPE/NUT BOLT, REMOVAL ANDFIXINGOF STP IN CASE REQUIRED ETC., FOR CHANGING GASKET.