REPAIRS TO PARKING SHEDS, DRYING AREAS OF JCOs AND ORs MD ACCN IN AGE B/R-I OF GE (N) AHMEDNAGAR.

Amount

S & F in repair 6 feet pully operated cloths drying system consisting of aluminium pipe of outer dia 22 mm, inner dia 19.80 mm , pulleys made up of detrin with rope guide mounted on channel pair of length 24 inches (distance between two pipes is adjustable) locking system to hide rope knot channel to be mounted or fixed with self tapping screws provided in kit. Rope will be polyster branded undyed nylon of 4mm dia, fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20 kg/m, minimum weight of rope shall not be less than 550 gms/unit (for 4 pipes) with all accessories and making good the disturbed portion/ Surfaces if any while fixing drying and complete all as specified all as specified and directed by Engr-in-Charge. Make: Easy Dry Systems or Equivalent.

S & F in repair (4 pipes of 4.5 feet) wall mounted stand consisting of four anodized aluminium pipes, each of outer dia 22 mm and inner dia 19.8 mm, mounted on anodized aluminium angle of size 40 X 40 X 3 mm weight of stand not less than 1.6 kg complete all as specified and directed by Engr-in-Charge. Make: Easy Dry Systems or Equivalent.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) including floor finishes

S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A,

M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.

Providing and laying rubber moulded glossy finish 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft and loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, removing surplus material n.exc 50 mtr and making good distrubed surface etc complete all as specified and directed by Engineer-in-Charge

M&L for plain cement concrete in PCC 1:4:8 type D2 using 40 mm graded aggregates in foundation filling and mass concrete or similar work etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvalume aluminium zinc coating GI based manglore pattern corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc all as directed.

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 58,900.00 shall be deducted from BOQ on account of schedule of credit

M/S. Z.K.ENTERPRISES, AHMEDNAGAR (BID ID -3161037)

Ms. M.D. Auty (BID ID -3161088)

M/s AG PATHAN (BID ID -3160989)

M/s. N D Karande (BID ID -3161349)

M/S. M. F. Sharif & Co. (BID ID -3160912)

Maruti Abhiyantriki (BID ID -3160856)

MS. G.A. CONSTRUCTION (BID ID -3161127)

Neha Enterprises (BID ID -3161247)

Arihant Construction (BID ID -3160175)